Introduction
Thank you for purchasing the Picket House Furnishings Valerie Bar Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar table. Please read these instructions carefully before beginning assembly and retain them for future reference.
The Valerie Bar Table is designed to be a functional and stylish addition to your home, featuring COB LED lighting, an integrated speaker, a can opener, and a USB port for enhanced convenience. It also includes dedicated storage for wine bottles and glasses.
Safety Information
- Read All Instructions: Ensure you understand all assembly and usage instructions before operating the product.
- Two-Person Assembly: Assembly of this bar table is recommended for two adults to ensure safety and ease of handling.
- Stable Placement: Place the bar table on a flat, level, and stable surface to prevent tipping.
- Weight Limits: Do not exceed the recommended weight limits for shelves and tabletops. Overloading can cause damage or injury.
- Electrical Safety: When using the USB port, ensure your devices and cables are in good condition. Do not expose electrical components to moisture.
- Glass Care: Handle glass components with care to avoid breakage. Clean glass surfaces with appropriate cleaners.
- Children and Pets: Keep children and pets away from the assembly area. Do not allow children to climb on or play with the bar table.
- Proposition 65 Warning: This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Package Contents
Please check to ensure all components are present and undamaged before beginning assembly. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Bar Table Top (Glass)
- Lower Shelf (Glass)
- Main Cabinet Body (Wood)
- Support Legs and Footrest (Metal/Wood)
- Wine Rack Insert
- Glass Holders
- Assembly Hardware (screws, bolts, connectors, etc.)
- Instruction Manual
Setup and Assembly Instructions
Tools Required (Not Included): Phillips head screwdriver, Allen wrench (if not provided), soft mallet (optional).
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Identify Parts: Refer to the parts list and diagrams (if provided) to identify each component.
- Assemble Base Structure: Attach the support legs and footrest to the main cabinet body using the provided hardware. Ensure all connections are secure but do not overtighten.
- Install Internal Components: Insert the wine rack and glass holders into their designated slots within the cabinet.
- Attach Glass Shelves: Carefully place the lower glass shelf and the main bar table top onto their respective supports. Secure them using the provided fasteners or suction cups, if applicable. Ensure the glass is seated firmly and evenly.
- Final Tightening: Once all components are in place, gently tighten all screws and bolts to ensure stability. Do not overtighten.
- Positioning: Move the assembled bar table to its desired location. Ensure it is stable and level.

Figure 1: Front view of the assembled Valerie Bar Table.

Figure 2: Rear view of the Valerie Bar Table, highlighting the cabinet structure.

Figure 3: Detail of the curved glass tabletops.

Figure 4: Integrated glass holders within the cabinet.
Operating Instructions
COB LED Lighting
The Valerie Bar Table features integrated COB LED lighting to enhance its modern aesthetic. The lighting system is typically controlled by a discreet switch located on the unit. Locate the switch, usually near the power input, and press it to cycle through lighting modes or to turn the lights on/off.

Figure 5: Valerie Bar Table with COB LED lighting activated.
Integrated Speaker
The bar table includes a built-in speaker for audio playback. To use the speaker:
- Power On: Locate the speaker's power button, usually near the speaker grille or control panel. Press and hold to turn on.
- Pairing Mode: The speaker will typically enter Bluetooth pairing mode automatically, indicated by a flashing LED light.
- Connect Device: On your smartphone or audio device, enable Bluetooth and search for available devices. Select "Valerie Bar Table Speaker" (or similar name) from the list to pair.
- Play Audio: Once paired, you can play audio from your device through the bar table's speaker.
USB Port
An integrated USB port is provided for charging your electronic devices. Simply connect your device's USB charging cable to the port. Ensure the bar table is connected to a power source for the USB port to function.
Can Opener
A convenient can opener is built into the side of the bar table. To use, simply hook the edge of a can under the opener and apply upward pressure to open.

Figure 6: Detail of the integrated can opener and speaker.
Maintenance and Care
- Cleaning Wood Surfaces: Wipe wood surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that can damage the finish. Dry immediately with a clean cloth.
- Cleaning Glass Surfaces: Use a glass cleaner and a soft, lint-free cloth to clean glass tops. Avoid spraying cleaner directly onto electrical components.
- Spills: Wipe up spills immediately to prevent staining or damage to the wood finish.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary, but do not overtighten.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the finish.
- Heat Protection: Use coasters or placemats to protect surfaces from hot items.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not turning on. | Not connected to power; switch is off; loose connection. | Ensure power cord is securely plugged in. Check the LED power switch. Inspect connections. |
| Speaker not pairing/playing audio. | Speaker not in pairing mode; Bluetooth off on device; device too far. | Ensure speaker is powered on and in pairing mode. Enable Bluetooth on your device. Move device closer to the speaker. |
| USB port not charging. | Bar table not powered; faulty USB cable; device incompatibility. | Verify the bar table is connected to power. Try a different USB cable or device. |
| Table feels wobbly. | Loose hardware; uneven floor. | Check and tighten all assembly hardware. Adjust floor levelers if present, or place shims under legs. |
Specifications
- Model Name: Valerie Bar Table
- Model Number: DA-17290-7-BT
- Brand: Picket House Furnishings
- Manufacturer: Elements International
- Dimensions (L x W x H): 26" x 60" x 44"
- Weight: Approximately 116 lbs
- Material: Wood, Glass
- Color: White
- Features: COB LED Lighting, Integrated Speaker, USB Port, Can Opener, Wine Rack, Glass Holders
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Picket House Furnishings customer service. Keep your purchase receipt for warranty claims.