Product Overview
The hansgrohe Xarita Lite S mirror is a round bathroom mirror featuring integrated LED lighting and an infrared (IR) sensor for control. It is designed to provide even illumination and includes comfort functions such as dimmable light, a mirror heater to prevent fogging, and a memory function to recall previous settings. The mirror also incorporates an automatic shut-off feature for energy efficiency.
Image: The hansgrohe Xarita Lite S mirror in use, demonstrating its integrated LED lighting and clear reflection.
Installation and Setup
Installation of the hansgrohe Xarita Lite S mirror requires electrical connection. For safety and proper functionality, hansgrohe recommends that installation and electrical connection be performed by a qualified specialist or installer with appropriate qualifications.
Mounting hardware and assembly instructions are included with the mirror. Please refer to the detailed assembly instructions provided in the packaging for specific steps and safety guidelines.
Dimensions
Image: Technical drawing illustrating the dimensions of the round mirror, including its 700mm diameter and mounting specifications.
- Diameter: 700 mm
- Depth: 33 mm
- Mounting Bracket Spacing: 300 mm (center-to-center)
- Distance from top edge to mounting points: 230 mm
Included Components
- Mirror unit
- Mounting material
- Assembly instructions
- LED bulb (integrated)
Operation
Light Control (IR Sensor)
The mirror's LED lighting is controlled via a contactless infrared (IR) sensor. To activate or deactivate the light, simply wave your hand in front of the sensor located on the mirror frame.
- Brightness Adjustment: The light brightness is continuously adjustable (dimming function). To dim, hold your hand in front of the IR sensor until the desired brightness is achieved.
- Light Color: The LED light provides a neutral white color (4,000 K), optimized for accurate color reproduction.
Mirror Heater
The integrated mirror heater prevents the glass surface from fogging up, ensuring a clear view even in humid bathroom conditions. The heater activates automatically with the light or can be controlled independently depending on the specific model configuration (refer to full assembly instructions).
Memory Function
The mirror is equipped with a memory function that saves the last used brightness setting. When the mirror is turned on again, it will recall this setting.
Automatic Shut-off
For energy saving and convenience, the mirror's lighting automatically turns off after 8 hours of continuous operation if not manually switched off. This feature helps prevent unnecessary power consumption.
Care and Maintenance
Cleaning
To clean the mirror surface and frame, use a soft, damp cloth and a mild, non-abrasive cleaning agent. Avoid using harsh chemicals, abrasive pads, or solvents, as these can damage the mirror's finish or electronic components. Ensure no liquid enters the electrical components.
LED Replacement
The integrated LED components are designed for a long lifespan. In the event of an LED malfunction, the LEDs are replaceable. This procedure should be carried out by a qualified technician to ensure safety and proper function.
Troubleshooting
If you experience issues with your hansgrohe Xarita Lite S mirror, please consult the following common solutions:
- Light not turning on:
- Check the main power supply to the mirror.
- Ensure the IR sensor is not obstructed and your hand movement is clear.
- If recently installed, verify electrical connections were made correctly by a professional.
- Light not dimming:
- Ensure you are holding your hand steadily in front of the IR sensor for continuous adjustment.
- Mirror fogging:
- Verify the mirror heater function is active (often linked to the light being on).
- Allow a few minutes for the heater to warm up and clear the fog.
- Memory function not working:
- Ensure the mirror is powered consistently. Power interruptions may reset the memory.
If these steps do not resolve the issue, please contact hansgrohe customer support or a qualified electrician.
Technical Specifications
| Feature | Specification |
|---|---|
| Model | Xarita Lite S |
| Product Number | 54966700 |
| Shape | Round |
| Dimensions (Diameter x Depth) | 700 mm x 33 mm |
| Item Weight | 5.82 Kilograms |
| Frame Material | Aluminium |
| Finish Type | Painted (Matte White) |
| Mounting Type | Wall Mount |
| Lighting Type | Direct LED light |
| Light Color Temperature | 4,000 K (Neutral White) |
| Special Features | Lighted, Touch Sensor (IR), Dimmable, Mirror Heater, Memory Function, Automatic Shut-off |
| IP Rating | IP44 (Splash-proof) |
| Assembly Required | No (Professional installation recommended for electrical connection) |
| Batteries Required | No |
Warranty and Support
The hansgrohe Xarita Lite S mirror comes with a 5-year warranty, providing comprehensive security against manufacturing defects. This warranty underscores the product's quality and durability.
For technical assistance, warranty claims, or further information, please contact hansgrohe customer support through their official website or the contact details provided in your product documentation. Always provide your model number (54966700) when seeking support.
For sustainable use, hansgrohe ensures that components, including LEDs, are replaceable if necessary, extending the product's lifespan.
