Evenflo CS700212434
Evenflo GoTime LX Booster Car Seat Instruction Manual
Model: CS700212434
Introduction
The Evenflo GoTime LX Booster Car Seat is designed to provide safety and comfort for older children. This manual contains important information regarding the proper use, installation, and maintenance of your booster car seat. Please read it thoroughly before use and keep it for future reference.
Image: The Evenflo GoTime LX Booster Car Seat in Astro Blue, showcasing its full assembly with headrest and base.
Important Safety Information
Always follow these safety guidelines to ensure the well-being of your child:
- Ensure the child meets the minimum age, weight, and height requirements for this booster seat.
- Always secure the child using the vehicle's lap and shoulder belt system as instructed.
- Never use the booster seat if it has been involved in a crash, even if there is no visible damage.
- Do not modify the booster seat in any way.
- Register your product with Evenflo to receive important safety updates and recall information.
Setup and Installation
The Evenflo GoTime LX Booster Car Seat offers two modes of use: High-Back Booster and No-Back Booster. Follow these steps for assembly and installation.
1. High-Back Booster Mode
This mode is suitable for children weighing 40-120 lbs and measuring 44-60 inches in height, with a minimum age of 5 years.
- Attach the Backrest: Align the backrest with the base and push down firmly until it clicks into place. Ensure both sides are securely latched.
- Adjust Headrest Height: The headrest can be adjusted to 7 different positions. Use the adjustment handle at the top of the headrest to raise or lower it, ensuring the vehicle's shoulder belt passes correctly over your child's shoulder.
- Position in Vehicle: Place the booster seat on the vehicle's seat. Ensure it sits flat against the vehicle's seat back.
- Secure Child: Guide the vehicle's lap belt under the armrests and into the lap belt guides. Route the shoulder belt through the red shoulder belt guide on the headrest, ensuring it lies flat across the child's chest and shoulder, not on the neck or face. Buckle the vehicle's seat belt.
Image: The Evenflo GoTime LX Booster Car Seat demonstrating its adjustable headrest for varying child heights.
Image: Close-up view of the red seatbelt guide on the Evenflo GoTime LX Booster Car Seat, showing proper shoulder belt positioning.
2. No-Back Booster Mode
This mode is suitable for children weighing 40-120 lbs and measuring 44-60 inches in height, with a minimum age of 5 years.
- Remove the Backrest: Locate the release levers or buttons at the base of the backrest. Press or pull them as indicated in the full product manual to detach the backrest from the booster base.
- Position in Vehicle: Place the no-back booster on the vehicle's seat.
- Secure Child: Guide the vehicle's lap belt under the armrests and into the lap belt guides. Use the included belt clip to properly position the vehicle's shoulder belt across the child's shoulder, ensuring it does not rest on the neck. Buckle the vehicle's seat belt.
Image: The Evenflo GoTime LX Booster Car Seat with its backrest separated from the base, illustrating the transition to no-back booster mode.
Operating the Booster Seat
Once installed, ensure your child is properly seated and secured for every ride.
- Child Positioning: Ensure your child's back is flat against the booster seat's backrest (in high-back mode) or the vehicle's seat back (in no-back mode).
- Belt Fit: The lap belt should lie low across the child's hips, touching the thighs. The shoulder belt should cross the center of the child's shoulder and chest.
- Cup Holders: Utilize the dual integrated cup holders for drinks and snacks.
Image: A close-up of the Evenflo GoTime LX Booster Car Seat's integrated cup holder, holding a snack pouch.
Image: Two children seated comfortably in Evenflo GoTime LX Booster Car Seats in a vehicle, demonstrating proper use.
Care and Maintenance
Regular cleaning and maintenance will prolong the life of your booster seat.
- Cleaning the Fabric: The padded seat is removable and machine-washable. Use cold water and a gentle cycle. Tumble dry on low heat or air dry.
- Cleaning the Shell: Wipe the plastic and metal parts with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- Strap Care: Inspect the seat belts and straps regularly for any signs of wear or damage. Clean with a damp cloth; do not machine wash or submerge in water, as this can weaken the webbing.
Troubleshooting
If you encounter any issues with your Evenflo GoTime LX Booster Car Seat, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Booster seat feels loose in vehicle. | Vehicle seat belt not tightened sufficiently. | Ensure the vehicle's lap and shoulder belts are pulled taut and securely buckled. The booster should not move more than 1 inch side-to-side or front-to-back at the belt path. |
| Shoulder belt is too high or too low on child. | Headrest is not at the correct height. | Adjust the headrest to one of the 7 height positions until the shoulder belt lies flat across the child's shoulder and chest. |
| Backrest does not attach securely to base. | Misalignment or obstruction. | Ensure the backrest is correctly aligned with the base's attachment points and push down firmly until you hear a click. Check for any debris obstructing the connection. |
For further assistance, please contact Evenflo ParentLink customer service.
Product Specifications
- Model Number: CS700212434
- UPC: 032884209484
- Modes of Use: High-Back Booster, No-Back Booster
- Child Weight Range: 40 - 120 lbs (18 - 54 kg)
- Child Height Range: 44 - 60 inches (112 - 152 cm)
- Minimum Child Age: 5 years
- Height Positions: 7 adjustable positions
- Installation Type: Vehicle Seat Belt
- Material: Polyester, Polyurethane Foam
- Item Weight: 7.1 lbs (3.2 kg)
- Item Dimensions (D x W x H): 15.2" x 28.19" x 28.19" (38.6 cm x 71.6 cm x 71.6 cm)
- Color: Astro Blue
Image: Diagram showing the key dimensions of the Evenflo GoTime LX Booster Car Seat.
Warranty Information
The Evenflo GoTime LX Booster Car Seat comes with a 90-day limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship. For full details and to make a warranty claim, please refer to the official warranty document included with your product or visit the Evenflo website.
Support and Contact
For assistance with installation, product questions, or troubleshooting, please contact Evenflo ParentLink customer service:
- Online Support: Visit the official Evenflo website.
- Live Video Support: Evenflo offers live video support with certified car seat safety technicians for proper vehicle installation. Check the Evenflo website for availability and scheduling.
Always refer to the complete instruction manual provided with your product for detailed information and safety warnings.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.