LOOP GEAR SK05PRO Power Bank Flashlight and LOOPDOT EDC RGB Flashlight User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your LOOP GEAR SK05PRO Power Bank Flashlight and LOOPDOT EDC RGB Flashlight. Please read this manual thoroughly before operating the devices and retain it for future reference.

Product Overview

The LOOP GEAR SK05PRO is a high-lumen flashlight that also functions as an 8000mAh power bank. It features dual-light sources (flood and spot) and fast charging capabilities. The LOOPDOT is a compact, interactive EDC (Everyday Carry) RGB flashlight with a pixel display and built-in mini-games.

2. Safety Information

• Do not look directly into the flashlight beam to avoid eye injury.
• Keep devices away from children.
• Use only specified charging cables and power adapters.
• Do not disassemble or modify the devices.
• Ensure the charging port covers are securely closed when not in use, especially in wet conditions, to maintain IP68 waterproof rating.

3. Setup

3.1 Initial Charging (SK05PRO)

Before first use, fully charge the SK05PRO flashlight. Connect the provided USB-C cable to the charging port on the SK05PRO and plug the other end into a compatible USB power adapter (not included). The charging indicator will show progress. A full charge ensures optimal performance and battery life.

The SK05PRO supports 20W fast charging.

Image: The SK05PRO flashlight connected via USB-C cable to charge a smartphone, demonstrating its power bank functionality.

3.2 Battery Installation (SK05PRO)

The SK05PRO uses replaceable 18650 lithium-ion batteries. To install or replace batteries:

1. Unscrew the battery compartment cap.
2. Insert the 18650 batteries according to the polarity markings (+/-) inside the compartment.
3. Securely screw the battery compartment cap back on.

Image: The SK05PRO flashlight with its battery compartment open, displaying two 4000mAh 18650 rechargeable lithium-ion batteries ready for installation or replacement.

3.3 Initial Charging (LOOPDOT)

The LOOPDOT also features a built-in rechargeable battery. Connect a USB-C cable to its charging port and a power source. The pixel display may indicate charging status.

4. Operating Instructions

4.1 SK05PRO Power Bank Flashlight

Power On/Off and Light Modes

• Power On: Press and hold the power button for 1-2 seconds.
• Switch Modes: Short press the power button to cycle through different brightness levels and modes (e.g., Floodlight, Spotlight, combined).
• Power Off: Press and hold the power button again.

Image: The SK05PRO flashlight illustrating its dual-light capability, showing a wide floodlight beam (3060 Lumens) and a focused spotlight beam (1300 Lumens) in different outdoor scenarios.

Power Bank Function

To use the SK05PRO as a power bank, connect your external device (e.g., smartphone) to the USB-C output port on the flashlight using a compatible charging cable. The SK05PRO will automatically begin charging your device.

4.2 LOOPDOT EDC RGB Flashlight

Power On/Off and Brightness Adjustment

• Power On/Off: Refer to the specific button or twist mechanism on your LOOPDOT.
• Stepless Dimming: Twist the gear dial on the LOOPDOT to adjust the brightness from a soft glow to high brightness.

Image: A hand holding the LOOPDOT flashlight, illustrating the 'Shake to Switch' feature that allows users to toggle between flood and spot light modes with a simple motion.

Image: Multiple LOOPDOT flashlights showcasing different ambient pixel light patterns, including Red-Blue, Red Flash, and Red-White flash alerts.

Interactive Mini Games

The LOOPDOT features 11 built-in mini pixel games. To access and play games, refer to the specific button presses or gestures outlined in the quick start guide included with your LOOPDOT. Examples of games include 'Catch-the-Gems', 'Lucky Direction', and 'Rock-paper-scissors'.

Image: Two LOOPDOT flashlights held in hands, displaying pixelated graphics from interactive mini-games such as 'Catch-the-Gems' and 'Rock-paper-scissors'.

5. Maintenance

5.1 Cleaning

Wipe the devices with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure all ports are closed before cleaning if using a damp cloth.

5.2 Battery Care

• Recharge the devices regularly, even if not in frequent use, to maintain battery health.
• Avoid fully discharging the batteries for extended periods.
• If the SK05PRO batteries are replaceable, ensure to use high-quality 18650 batteries.

5.3 Storage

Store the devices in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, charge the batteries to approximately 50% capacity.

6. Troubleshooting

6.1 Device Not Turning On

• Ensure the battery is charged. Connect to a power source and attempt to charge.
• For SK05PRO, check if batteries are correctly installed with proper polarity.

6.2 Charging Issues

• Verify the charging cable and adapter are working correctly. Try a different cable or adapter.
• Ensure the charging port is clean and free of debris.

6.3 Light Output is Weak or Inconsistent

• Charge the device fully. Low battery can affect light output.
• Ensure the lens is clean.

7. Specifications

Image: The SK05PRO flashlight highlighting its maximum output of 4360 Lumens and a maximum beam distance of 405 meters, emphasizing its high power in a compact size.