1. Introduction
This manual provides instructions for the safe and efficient operation of your Benreom Wireless Vanity Light. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Benreom Wireless Vanity Light
The Benreom Wireless Vanity Light is a rechargeable, battery-operated LED lamp designed for versatile lighting applications, particularly for makeup and vanity areas. It features adjustable color temperature and brightness, a multi-angle magnetic design, and a cordless operation for convenience.
2. What's in the Box
Verify that all components are present upon unpacking:
- 1 x Rechargeable Mirror Light
- 1 x Adhesive Magnetic Base
- 1 x USB Charging Cable (Type-C)
- 1 x Instruction Manual
Figure 2: Package Contents
3. Product Features
- Adjustable Brightness & Color Temperature: Features 106 high color rendering light beads (Ra>90). Adjust color temperature (3000K/4000K/6500K) and brightness with a single touch button.
- Multi-Angle Adjustable Magnetic Design: The LED light bar attaches magnetically to its base, allowing for 360-degree rotation and angle adjustment.
- Cordless Rechargeable Operation: Equipped with a built-in 4000mAh rechargeable battery, providing cordless convenience. Charges via USB Type-C.
- Easy Installation: No drilling or wiring required. Installs in seconds using the adhesive magnetic base.
- Portable: Lightweight and compact design allows for easy removal and portability.
Figure 3: Adjustable Angle Feature
Figure 4: Battery and Charging Information
4. Setup and Installation
Follow these steps to install your Benreom Wireless Vanity Light:
- Prepare the Surface: Ensure the mirror or desired surface is clean, dry, and smooth.
- Attach the Magnetic Base: Peel off the protective film from the adhesive magnetic base. Firmly press the base onto the desired location on your mirror or wall. Hold for 30 seconds to ensure strong adhesion.
- Mount the Light Bar: Align the magnetic point on the back of the LED light bar with the magnetic ball on the installed base. The light bar will snap into place.
- Adjust Angle: Once mounted, you can freely rotate and adjust the angle of the light bar to direct illumination as needed.
Figure 5: Easy Installation Steps
Figure 6: Suitable for Various Mirror Types
5. Operating Instructions
The Benreom Wireless Vanity Light is operated via a single touch button located on the side of the light bar.
- Power On/Off: Press the touch button once to turn the light on. Press and hold the button to turn it off.
- Adjust Color Temperature: With the light on, short press the touch button to cycle through the three color temperature modes: 3000K (Warm White), 4000K (Natural White), and 6500K (Cool White).
- Adjust Brightness: To adjust brightness, press and hold the touch button. The brightness will gradually increase or decrease. Release the button when the desired brightness level is reached.
Video 1: Demonstrating the three different light settings (color temperature and brightness adjustment).
Video 2: Showcasing the magnetic attachment and removability of the vanity light.
6. Charging Instructions
The vanity light is equipped with a 4000mAh rechargeable battery. When the battery is low, the light may dim or turn off. To charge:
- Locate the USB Type-C charging port on the side of the light bar.
- Connect the provided USB Type-C cable to the light bar and plug the other end into a compatible USB power source (e.g., wall adapter, computer USB port, power bank).
- A charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
- Charging typically takes 2-3 hours for a full charge.
7. Maintenance
- Cleaning: Wipe the light bar and magnetic base with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing for an extended period, ensure the battery is fully charged and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
- Battery Care: Avoid fully discharging the battery frequently to prolong its lifespan.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light using the provided USB Type-C cable. |
| Light is dim or flickers. | Low battery. | Recharge the light. |
| Light does not stick to the surface. | Surface is not clean or smooth; adhesive is worn. | Clean the surface thoroughly. Ensure it is smooth. If adhesive is worn, consider replacing the adhesive pad. |
| Cannot change color temperature or brightness. | Incorrect operation. | Refer to Section 5: Operating Instructions for correct button presses. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Benreom |
| Model Number | Wireless Mirror Light |
| Color | 3 White Light |
| Material | Acrylonitrile Butadiene Styrene, Polycarbonate |
| Light Source | LED |
| Number of Light Sources | 106 |
| Wattage | 6 watts |
| Brightness | 400 Lumen |
| Voltage | 5 Volts (DC) |
| Light Color Temperature | 3000K/4000K/6500K |
| Control Method | Touch |
| Power Source | Battery Powered (4000mAh) |
| Installation Type | Self-adhesive, Magnetic |
| Item Dimensions L x W x H | 11"L x 1.1"W x 1.1"H |
| Indoor/Outdoor Usage | Indoor |
10. Warranty and Support
This product comes with a 1-year manufacturer's warranty. For warranty claims or technical support, please contact Benreom customer service through your purchase platform or visit the official Benreom store.
Benreom Store: Visit the Benreom Store
11. Important Safety Information
- Do not expose the device to extreme temperatures or humidity.
- Do not attempt to disassemble or modify the product. This will void the warranty and may cause damage or injury.
- Keep out of reach of children.
- Use only the provided charging cable or a certified USB Type-C cable for charging.
- This product is not water resistant. Avoid contact with water or other liquids.