BLOKEES Peni Parker SP//dr Suit Model Kit Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your BLOKEES Peni Parker SP//dr Suit Model Kit. This officially licensed collectible features 177 parts, 77 points of articulation, and an internal lighting feature. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience. This product is recommended for ages 14 and above.

Safety Information

• Small Parts Warning: This kit contains small parts which may pose a choking hazard. Keep all components out of reach of children under 3 years of age.
• Adult Supervision: For individuals aged 14 and below, assembly should be performed under the supervision of a guardian.
• Battery Disposal: If the model uses batteries for its lighting feature, dispose of or recycle them correctly according to local regulations.
• Handling: Exercise care when detaching parts from sprues and during assembly to prevent injury.

Package Contents

Verify that all the following components are included in your package:

• SP//dr Model Kit components (177 pieces)
• Peni Parker Statue (1)
• Weapon Accessories (Shoulder-Mounted Weapons, Mechanical Spider Spears)
• Display Platform (1)
• Instruction Booklet (This manual)

Assembly Instructions

This model kit features tool-free assembly. Carefully follow the steps below. Refer to the included visual guide (if applicable) for detailed part identification.

1. Prepare Components: Carefully detach all 177 parts from their sprues. Use a hobby knife or nippers for clean cuts if necessary, though the design is intended for tool-free separation. Smooth any rough edges with a small file or sandpaper if desired.
2. Assemble Core Body: Begin by connecting the main torso and waist sections. Ensure all joints snap securely into place.
3. Attach Limbs: Assemble the arms and legs separately, then attach them to the core body. Pay attention to the orientation of each limb. The model features 77 points of articulation, so ensure joints move freely after assembly.
4. Install Lighting Part: Locate the designated area for the lighting component, typically within the head or chest section. Carefully insert the lighting part as indicated in the visual guide.
5. Assemble Head and Shoulder Armor: Attach the head to the torso. Then, assemble and attach the shoulder armor, ensuring the extendable shoulder armor mechanism functions correctly.
6. Add Weapon Accessories: Assemble the Shoulder-Mounted Weapons and Mechanical Spider Spears. Attach them to the designated points on the SP//dr suit.
7. Assemble Peni Parker Statue: The Peni Parker statue is a separate component. Assemble it according to its specific instructions, if any.
8. Final Check: Once all parts are assembled, gently test the articulation points, including spider joints, 360° waist rotation, 30° bendable waist angle, and adjustable hips, to ensure full range of motion.

Operating the Lighting Feature

The BLOKEES Peni Parker SP//dr Suit Model Kit includes an internal lighting feature to enhance its visual appeal.

1. Activation: The lighting feature is typically activated by a small switch or by gently shaking the model. Refer to the specific instructions on the packaging or included leaflet for precise activation methods.
2. Power Source: This model does not require external batteries for its lighting feature, as it is integrated.
3. Deactivation: The light will typically turn off automatically after a short period or can be deactivated by repeating the activation action.

Maintenance and Care

• Cleaning: Clean the model with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the plastic finish.
• Storage: If not in use for an extended period, store the model in a cool, dry place away from direct sunlight to prevent material degradation or discoloration.
• Disassembly: If partial disassembly is required for storage or transport, do so carefully to avoid breaking delicate parts or joints.
• Joint Care: Avoid forcing joints beyond their intended range of motion to prevent breakage. If a joint feels stiff, gently work it back and forth or apply a small amount of silicone lubricant (not included) if necessary.

Troubleshooting

Here are solutions to common issues you might encounter during assembly or use:

Product Specifications

Warranty and Support

For warranty information, missing parts, or technical support, please contact BLOKEES customer service directly. Refer to the product packaging or the official BLOKEES website for contact details.