1. Product Overview
The Hover-1 My First self-balancing scooter is designed as an ideal entry-level device for young children. It features self-balancing technology to provide a fun and safe learning experience. The scooter is equipped with non-slip footpads for enhanced grip during rides.
Powered by dual 150W motors (300W combined), it can reach a maximum speed of 5 mph and handle inclines of up to 5 degrees. Bright LED headlights illuminate the path, adding to the riding experience.
Image: Two children enjoying their Hover-1 My First hoverboards, highlighting key specifications such as max speed, range, and tire size.
Image: A child demonstrating the Hover-1 My First hoverboard, showcasing its user-friendly features.
2. Important Safety Information
WARNING: FOR YOUR SAFETY, PLEASE READ THE ENTIRE USER MANUAL BEFORE OPERATING THE HOVER-1 SCOOTER.
- Always wear proper protective equipment, such as a helmet. Helmets should fit properly with the chin strap in place, providing protection for your entire head.
- The Hover-1 My First scooter is UL2272 certified, ensuring it meets applicable safety standards.
- Do not attempt to accelerate when you hear the beep warning for speeding.
- Do not ride without proper training and guidance.
- Do not ride at high speeds, on steep slopes, or in rocky or uneven terrain.
- Do not carry passengers. Do not perform stunts, tricks, or turn sharply.
- Riders should be at least 5 years old.
- Maximum weight load is 80 lbs.
- Adult supervision is required.
- Never use near or around motor vehicles.
- Do not ride at night.
- Do not ride near swimming pools or other bodies of water.
- FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS AND OTHER MISUSE CAN RESULT IN DEATH OR SERIOUS INJURY OR DAMAGE TO THE PRODUCT. USE AT YOUR OWN RISK.
Image: Emphasizing the Hover-1 My First hoverboard's UL certification and suitability for children aged 5 and above.
3. Package Contents
Ensure all items are present in your package:
- Hover-1 My First Self-Balancing Scooter
- Hover-1 Charger
- Instruction Manual
4. Initial Setup and Charging
4.1 Charging the Scooter
Before first use, fully charge your Hover-1 My First scooter. A full charge takes approximately 5 hours. Use only the supplied Hover-1 charger.
- Locate the charging port on the scooter (typically on the underside).
- Connect the charger to the scooter's charging port.
- Plug the charger into a standard wall outlet.
- The indicator light on the charger will change (e.g., from red to green) when charging is complete.
- Do not leave the battery on charge for extended periods after it is fully charged.
- Allow the scooter to cool down before charging if it has just been used.
4.2 Powering On/Off
To power on the scooter, press and hold the power button located near the charging port until the indicator lights illuminate. To power off, repeat the process.
5. Operating Instructions
5.1 First Ride Tips
- Always wear a helmet and other protective gear.
- Start in a safe, open area with adult supervision.
- Use a wall or a friend for support when first stepping on.
- The scooter features self-balancing technology, making it easier to learn.
- Non-slip footpads provide secure footing.
5.2 Riding the Scooter
- Step onto one footpad, then quickly and confidently step onto the other.
- Lean slightly forward to move forward.
- Lean slightly backward to move backward.
- To turn, gently press your left foot down to turn right, or your right foot down to turn left.
- Practice gentle movements until you are comfortable with control.
The Hover-1 My First scooter has a maximum speed of 5 mph and can climb inclines of up to 5 degrees. It offers a range of up to 3 miles on a full charge.
Image: Detail of the non-slip footpads, designed for secure and stable riding, especially for beginners.
Image: The Hover-1 My First hoverboard with its bright LED deck lights, enhancing visibility and fun.
6. Maintenance
6.1 Battery Maintenance
Proper battery care ensures longevity and performance:
- Do not leave batteries unused for extended periods of time. Lithium-ion batteries self-discharge when not in use.
- Store batteries in a cool, dry place away from direct sunlight.
- Keep the battery charged to around 60% to 80% capacity before storing the product or the battery for long periods.
- Charge the battery to approximately 70% at least once every six months.
- If the product has a user-removable battery, remove it and store it separately.
- Recommended storage temperature for the battery is between 41 °F and 77 °F (5 °C and 25 °C).
- Do not leave the battery on charge for extended periods after it is fully charged.
- Dropping batteries can damage internal circuitry. Inspect the battery carefully before use.
Image: Visual guide for optimal battery maintenance to extend the life of your Hover-1 scooter.
7. Troubleshooting
7.1 Beeping Sound and Flashing Light
If your Hover-1 My First scooter emits a beeping sound and its lights flash, it indicates improper usage or a potential issue. This can occur in the following situations:
- An obstruction is detected for 10 seconds.
- The user is riding on an incline steeper than the approved 5 degrees for 10 seconds.
The beeping and flashing light will continue until the improper condition is resolved and the device is reset.
7.2 Resetting the Scooter
To reset your scooter:
- Turn off the scooter.
- Ensure there are no obstructions and you are on a flat, safe surface.
- Turn the scooter back on.
If issues persist, refer to the full user manual or contact customer support.
8. Technical Specifications
| Feature | Detail |
|---|---|
| Model Name | DSA-MFH |
| Max Speed | 5 mph |
| Motor Power | Dual 150W (300W combined) |
| Tire Size | 6.3 inches |
| Max Range | 3 miles |
| Battery Type | 24V/2Ah Lithium-ion |
| Charge Time | 5 hours |
| Max Weight Load | 80 lbs |
| Item Weight | 12 Pounds |
| Dimensions (L x W x H) | 25 in x 11 in x 9 in |
| Special Feature | LED Headlights |
| Certifications | UL2272 Certified |
Image: Illustration of the 150W rated power motor, contributing to the scooter's balance and ease of use.
Image: Demonstrating the Hover-1 My First hoverboard's maximum speed of 5 mph and its capability to handle slight inclines.
Image: Highlighting the 3-mile range of the Hover-1 My First hoverboard on a single charge.
Image: Information on the 24V/2Ah lithium-ion battery, its power delivery, and 5-hour charging time.
9. Warranty and Support
9.1 Product Warranty
The Hover-1 My First Self-Balancing Scooter comes with a 90-day warranty covering parts and labor. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Hover-1 customer support:
- Phone: (866) 831-1520
- Website: www.hover-1.com
Image: Highlighting the UL2272 certification and 3-month warranty for peace of mind.
