BLACK+DECKER Quartz Glide 1700W Automatic Shut-Off Steam Iron User Manual

1. Introduction

Thank you for choosing the BLACK+DECKER Quartz Glide 1700W Automatic Shut-Off Steam Iron. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read all instructions carefully before use and retain this manual for future reference.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions before using the iron.
• Use the iron only for its intended use.
• To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
• Always turn the iron OFF before plugging or unplugging from the outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
• Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.
• Always disconnect iron from electrical outlet when filling with water or emptying, and when not in use.
• Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron; take it to a qualified service person for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
• Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.
• Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

3. Product Components

Familiarize yourself with the parts of your BLACK+DECKER Quartz Glide Steam Iron:

1. Water Fill Opening
2. Spray Nozzle
3. Steam/Dry Selector
4. Temperature Control Dial
5. Burst of Steam Button
6. Spray Mist Button
7. Self-Clean Button
8. Power Indicator Light
9. Quartz-Infused Ceramic Soleplate
10. 3-Meter Swivel Cord
11. Easy-Grip Handle

Figure 1: Overview of Iron Components

4. Setup and First Use

Before First Use

• Remove any labels, tags, or stickers from the iron body and soleplate.
• It is recommended to iron an old piece of fabric (e.g., a towel) for a few minutes to remove any residue from the soleplate.

Filling the Water Tank

The iron features a 350ml easy-fill water tank for extended ironing sessions.

1. Ensure the iron is unplugged from the electrical outlet.
2. Hold the iron in a horizontal position.
3. Open the water fill cover.
4. Using a clean measuring cup, carefully pour water into the water fill opening until the MAX fill line is reached. Do not overfill.
5. Close the water fill cover securely.

Figure 2: Filling the 350ml Easy-Fill Water Tank

5. Operating Instructions

This iron offers versatile ironing options, including dry ironing, steam ironing, vertical steaming, and spray mist.

Temperature Settings

Always check the garment's care label for recommended ironing instructions. If the label is missing, test the iron on an inconspicuous area of the garment first.

• Low Temperature: Synthetics, Nylon, Silk
• Medium Temperature: Wool, Polyester
• High Temperature: Cotton, Linen

Dry Ironing

1. Ensure the water tank is empty or the Steam/Dry selector is set to the DRY position.
2. Plug the iron into a 120V electrical outlet.
3. Set the Temperature Control Dial to the desired fabric setting. The power indicator light will illuminate.
4. Once the light turns off, the iron has reached the selected temperature and is ready for use.

Steam Ironing

For steam ironing, the water tank must be filled, and the temperature set to a steam-appropriate level (usually medium to high).

1. Fill the water tank as described in Section 4.
2. Plug the iron into a 120V electrical outlet.
3. Set the Temperature Control Dial to a steam setting (usually between wool and linen). The power indicator light will illuminate.
4. Once the light turns off, the iron has reached the selected temperature.
5. Slide the Steam/Dry selector to the desired steam level. The iron will begin to produce steam (27g/min powerful steam output).

Figure 3: Ironing with 80% Smoother Glide

Burst of Steam

Use the Burst of Steam feature for stubborn wrinkles or heavier fabrics.

• Ensure the iron is set to a steam-appropriate temperature.
• Press the Burst of Steam button to release a powerful shot of steam.
• Wait a few seconds between bursts to allow the steam to regenerate.

Vertical Steaming

The Burst of Steam feature can also be used for vertical steaming of hanging garments, drapes, or upholstery.

• Hang the garment on a hanger.
• Hold the iron upright, a few inches away from the fabric.
• Press the Burst of Steam button repeatedly while moving the iron up and down the garment.

Spray Mist

The Spray Mist function helps to dampen fabrics for easier wrinkle removal, especially for dry ironing.

• Ensure the water tank is filled.
• Press the Spray Mist button to release a fine mist onto the fabric.

Automatic Shut-Off

For safety and energy efficiency, your iron is equipped with a 3-way automatic shut-off feature.

• If left motionless on its soleplate, the iron will shut off after 30 seconds.
• If left motionless on its side, the iron will shut off after 30 seconds.
• If left motionless on its heel rest, the iron will shut off after 8 minutes.

To reset the iron after an automatic shut-off, simply move the iron. The power indicator light will illuminate, and the iron will reheat to the selected temperature.

Figure 4: 3-Way Automatic Shut-Off for Safety

6. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your iron.

Self-Cleaning Function

The self-cleaning feature helps to remove mineral buildup from the steam vents.

1. Fill the water tank to the MAX line.
2. Plug in the iron and set the Temperature Control Dial to the highest setting.
3. Once the iron reaches temperature (indicator light turns off), unplug it.
4. Hold the iron over a sink, press and hold the Self-Clean button. Hot water and steam will flush out mineral buildup.
5. Gently rock the iron back and forth until the water tank is empty.
6. Plug the iron back in and let it heat up to dry out any remaining water.
7. Unplug and store once cool.

Cleaning the Soleplate

• For minor residue, wipe the soleplate with a damp cloth while the iron is cool.
• Do not use abrasive cleaners or metal scouring pads, as these can damage the quartz-infused ceramic soleplate.

Storage

• Always ensure the iron is completely cool before storing.
• Empty any remaining water from the tank.
• Store the iron upright on its heel rest to prevent soleplate damage.
• Wrap the 3-meter cord loosely around the iron.

7. Troubleshooting

If you encounter any issues with your iron, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

This BLACK+DECKER appliance is backed by a 2-year limited warranty. For detailed warranty information, service, or support, please refer to the warranty card included with your product or visit the official BLACK+DECKER website.

Customer Support:

• For assistance, please visit www.blackanddecker.com or contact your local customer service center.

Figure 5: 2-Year Limited Warranty

10. Product Video Overview

Watch this video for a quick overview of the BLACK+DECKER Quartz Glide Steam Iron's key features and benefits, including its powerful steam, smooth soleplate, and safety functions.

Video 1: BLACK+DECKER Quartz Glide Steam Iron Features