TAGRY H08 Hybrid Active Noise Cancelling Bluetooth Headphones User Manual

1. Introduction

This manual provides detailed instructions for the use and maintenance of your TAGRY H08 Hybrid Active Noise Cancelling Bluetooth Headphones. Please read this manual carefully before use to ensure optimal performance and longevity of your device.

2. What's in the Box

• TAGRY H08 Headphones
• User Manual
• AUX 3.5mm Audio Cable
• Travel Pouch
• Type C Charging Cable

3. Product Overview

The TAGRY H08 headphones feature a sleek design with intuitive controls for an enhanced audio experience.

Image: TAGRY H08 Hybrid Active Noise Cancelling Bluetooth Headphones in black. This image shows the overall design of the headphones.

Key Features:

• Hybrid Active Noise Cancellation (ANC): Reduces up to 95% of ambient noise.
• 100 Hours Playtime: Extended battery life for long listening sessions.
• Fast Charging: 5-minute charge provides 10 hours of music.
• Hi-Res Audio: Delivers clear audio with deep bass.
• Comfort Fit: Lightweight design with ultra-soft protein leather ear cups.
• Foldable and Adjustable: For portability and a perfect fit.
• Wireless & Wired Connectivity: Bluetooth and 3.5mm AUX cable support.

Image: Close-up of the left earcup showing the ANC button and volume controls, with sound waves illustrating noise cancellation.

Image: Exploded view of the headphone driver, highlighting the Hi-Res Audio and deep bass capabilities.

4. Setup

4.1 Charging the Headphones

Before first use, ensure the headphones are fully charged. Connect the Type-C charging cable to the charging port on the headphones and a compatible USB power adapter. The indicator light will show charging status.

Image: TAGRY H08 headphones connected to a Type-C charging cable, illustrating the fast charging feature.

4.2 Pairing with Your Primary Device

1. Ensure the headphones are powered off.
2. Press and hold the Power button for 3 seconds to turn on the headphones. You will hear a voice prompt "Power On" and the indicator light will flash white for 5 seconds, indicating pairing mode.
3. Enable Bluetooth on your device and select "H08" from the list of available devices.
4. Once connected, you will hear a prompt "Connected".

4.3 Pairing with Another Device

To pair with a second device, disconnect the headphones from the first device. The headphones will automatically enter pairing mode. Then, follow the steps above to connect to the new device.

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the Power button for 3 seconds.
• Power Off: Press and hold the Power button for 3 seconds.

5.2 ANC & Transparency Mode Switching

The ANC button allows you to toggle between different listening modes.

• ANC On: Press the ANC button once. Reduces ambient noise.
• Transparency Mode: Press the ANC button again. Allows you to hear your surroundings.
• ANC Off: Press the ANC button a third time.

Image: Diagram illustrating the various button controls on the TAGRY H08 headphones, including power, volume, and ANC buttons.

5.3 Music/Game Mode

This headset supports switching between Game Mode and Music Mode. While the headset is powered on and connected, quickly press the ANC button 4 times to toggle between modes.

• Game Mode: Ultra-low latency for enhanced audio-visual sync in gaming.
• Music Mode: High-fidelity audio optimized for music and media playback.

5.4 Wired Mode & AUX Audio Support

The headphones can be used with the included 3.5mm AUX audio cable for a wired connection. Active Noise Cancellation (ANC) is not available in wired mode.

Image: TAGRY H08 headphones connected via a 3.5mm AUX cable, demonstrating wired connectivity.

6. Maintenance Guidelines

• Regularly clean the ear pads and headband with a soft, dry cloth.
• Store the headphones in the provided travel pouch to protect them from dust and damage.
• Avoid exposing the headphones to extreme temperatures or humidity.

Image: TAGRY H08 headphones folded into a compact form, highlighting their portable design.

7. Troubleshooting

7.1 Headphones Won't Turn On

Ensure the headphones are charged. Connect the headphones to the charger and wait for 5 seconds. If the LED indicator lights up, it means there is a good connection.

7.2 Headphones Won't Connect to Bluetooth Device

Ensure Bluetooth is enabled on your device. Make sure the headphones are in pairing mode (flashing white LED). If the issue persists, reset the headphones by pressing and holding the "V+" and "V-" keys simultaneously for 5 seconds.

7.3 Noise Cancellation Function Not Working

Ensure that the noise-cancelling mode is properly activated. Use the ANC button to toggle through the modes. If the issue persists, reset the headphones.

7.4 Headphones Not Charging

Ensure the charging cable is not damaged and that the charging port is free of dust and debris. Try using a different charging cable or power adapter.

7.5 Headphones Uncomfortable to Wear

Check the size of the headbands and adjust them to fit your ears comfortably.

Image: Visual guide for troubleshooting common issues like charging and pairing.

8. Specifications

9. Safety Information

9.1 Battery Warning

Do not disassemble, crush, or expose the battery to fire or high temperatures. Dispose of batteries according to local regulations.

9.2 FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

10. Warranty and Support

For customer service or product support, please refer to the contact information provided in your User Manual or visit the official TAGRY website.