1. Safety Guidelines
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Always ensure all parts are correctly assembled and securely fastened before use. Regularly check all connections.
- Do not exceed the maximum weight capacity of 450 pounds.
- Children should be supervised when using the bed.
- Do not allow children to climb on the roof structure or other parts not intended for climbing.
- Keep small parts away from children during assembly to prevent choking hazards.
- Place the bed on a flat, level surface.
- Keep away from open flames or direct heat sources.
2. Product Overview
The KEIKI Full House Shape Floor Bed Frame is designed for children, featuring a low-profile structure and a distinctive house-shaped frame. It is constructed from solid wood for durability.
Key Features:
- House-shaped frame design.
- Low-profile design for easy access and reduced fall risk, adhering to Montessori principles.
- Constructed from 100% solid wood for durability and stability.
- Features an easy assembly process with clearly labeled parts.
- Integrated wooden support slats eliminate the need for a box spring.
Image: Fully assembled KEIKI Full House Shape Floor Bed Frame in grey.
Image: KEIKI Full House Shape Floor Bed Frame with bedding and decorations in a child's room.
Image: Close-up view of the decorative wavy edge on the bed frame side panel.
3. Package Contents
Please check the package carefully to ensure all components and hardware are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Parts List (Illustrative):
- Headboard/Footboard panels
- Side rails
- Roof frame components
- Wooden support slats
- Center support legs (if applicable)
Hardware List (Illustrative):
- Screws, bolts, and nuts
- Allen wrench (if required)
Image: Bare KEIKI Full House Shape Floor Bed Frame, showing main structural components.
4. Setup and Assembly
Before You Begin:
- Read all instructions carefully before assembly.
- Clear a spacious area for assembly.
- Identify all parts and hardware using the provided list.
- Keep children and pets away from the assembly area.
Assembly Steps (General):
- Unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Attach the side rails to the headboard and footboard panels using the specified hardware. Do not fully tighten screws until all major components are connected.
- Assemble the roof frame structure according to the diagrams in your specific instruction manual.
- Install the wooden support slats onto the bed frame. Ensure they are evenly spaced and securely fastened.
- Once all components are in place, tighten all screws and bolts securely. Do not overtighten.
- Verify the bed frame is stable and all connections are firm.
Image: Angled view of the bare bed frame, illustrating the structure before mattress placement.
Image: Detail of the roof frame joint, indicating assembly points.
5. Operating Instructions
Mattress Placement:
This bed frame is designed for a Full-size mattress. Place the mattress directly onto the wooden support slats. No box spring is required.
Weight Capacity:
The maximum recommended weight for this bed frame is 450 pounds.
6. Maintenance
Cleaning:
- Wipe the bed frame with a soft, damp cloth.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Dry immediately with a clean cloth.
Regular Inspection:
- Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary.
- Inspect the wooden slats for any signs of damage or wear. Replace damaged slats immediately.
- Ensure the bed frame remains stable and level.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly. | Loose connections. Uneven floor. | Tighten all bolts and screws. Move the bed to a level surface or use shims if necessary. |
| Missing parts or hardware. | Packaging error. | Contact KEIKI customer support with your purchase details and the specific missing items. |
| Slats are creaking. | Loose slats or friction. | Ensure all slats are properly seated and secured. Apply felt pads between slats and frame if needed. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | QQ01454 |
| Size | Full |
| Material | Engineered Wood, Pine Wood |
| Product Dimensions (L x W x H) | 78.2" x 56.1" x 62.2" |
| Style | Modern, House Shape Floor Bed |
| Color | Gery |
| Maximum Weight Recommendation | 450 pounds |
| Item Weight | 59.7 pounds |
| UPC | 736970920818 |
Image: Detailed dimensions of the KEIKI Full House Shape Floor Bed Frame.
9. Warranty Information
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation included with your purchase or contact KEIKI customer support directly.
10. Customer Support
For assistance with assembly, missing parts, or any other inquiries, please contact KEIKI customer support.
You can visit the official KEIKI store for more information and contact options: