Introduction
This manual provides essential information for the safe assembly, operation, and maintenance of your Merax L-Shaped Triple Bunk Bed with Loft Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Important Safety Warnings
- Maximum Weight Capacity: The upper bed supports up to 400 lbs. The lower bed supports up to 400 lbs. Do not exceed these limits.
- Age Recommendation: The upper bunk is not suitable for children under 6 years of age.
- Guardrails: Always use guardrails on both sides of the upper bunk. Ensure guardrails are properly installed and secured.
- Ladder Safety: Always use the ladder for entering and exiting the upper bunk. Do not use substitute ladders.
- Mattress Size: Use only mattresses that are 39.2'' x 76'' (Twin size) for both the bunk beds and the loft bed. Ensure the mattress thickness does not exceed the maximum recommended height to maintain guardrail effectiveness.
- Prohibited Activities: Do not allow horseplay on or under the bed. Do not jump on the bed.
- Ventilation: Ensure adequate ventilation around the bed.
- Regular Checks: Periodically check and ensure that all connectors are tight. Retighten as necessary.
- Location: Position the bed away from windows, cords, or anything that could pose a strangulation hazard.
Components Overview
Your Merax L-Shaped Triple Bunk Bed includes the following main components:
- Bed Frames (Pine wood & MDF construction)
- Guardrails for upper bunks
- Ladders for access to upper bunks
- Bed Slats (no box spring required)
- Two storage drawers
- Assembly hardware and tools (included in packaging)
Image: Detailed dimension diagram of the Merax L-Shaped Triple Bunk Bed. This diagram illustrates the overall dimensions and individual bed sizes, including the twin over twin bunk and the attached twin loft bed.
Setup and Assembly
Assembly of the Merax L-Shaped Triple Bunk Bed is required. Please follow the step-by-step instructions provided in the separate assembly manual included with your product packaging. Ensure all parts are present before beginning assembly. It is recommended that two adults assemble this product to ensure safety and ease of construction.
Tools Required: All necessary tools for assembly are included in the package.
Estimated Assembly Time: Approximately 6 hours (as reported by users).
Image: An assembled Merax L-Shaped Triple Bunk Bed shown in a room. This image provides a visual reference of the fully constructed bed, featuring the twin over twin bunk and the attached twin loft bed configuration.
Operating Instructions (Usage)
The Merax L-Shaped Triple Bunk Bed is designed to maximize sleeping space and provide versatile functionality.
- Sleeping Capacity: This bed accommodates up to three individuals, with one twin bed on the lower bunk, one twin bed on the upper bunk, and an additional twin loft bed.
- Loft Bed Clearance: The space beneath the loft bed can be utilized as a play area, study nook, or for additional furniture.
- Storage Drawers: Two integrated drawers beneath the lower bunk provide convenient storage for bedding, toys, or other items. To use, simply pull the drawers out from under the bed frame.
- Mattress Support: The bed features sturdy slats, eliminating the need for a box spring. Place your twin-sized mattress directly on the slats.
Image: The Merax L-Shaped Triple Bunk Bed with its two storage drawers partially pulled out. This demonstrates the integrated storage solution available with the bed.
Maintenance
- Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the wood finish.
- Hardware Checks: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and fasteners to ensure they are tight. Retighten any loose hardware to maintain structural integrity and safety.
- Wood Care: Protect the wood from extreme temperature changes and direct sunlight to prevent warping or fading.
- Slat Inspection: Ensure all bed slats remain securely in place and are not damaged. Replace any broken or cracked slats immediately.
Troubleshooting
If you encounter any issues with your Merax L-Shaped Triple Bunk Bed, please refer to the following common solutions:
- Squeaking Noises: Squeaking often indicates loose hardware. Re-tighten all bolts and screws. Ensure the bed is on a level surface.
- Stability Issues: If the bed feels unstable, verify that all connections are secure and that the bed is assembled correctly according to the manual. Ensure it is placed on a flat, even floor.
- Missing Parts: If any parts were missing upon delivery, contact Merax customer support immediately with your purchase details.
- Damaged Parts: Do not attempt to assemble or use the bed with damaged parts. Contact Merax customer support for replacement parts.
For further assistance, please contact Merax customer support.
Specifications
| Brand | Merax |
| Model | Twin & Twin Over Twin |
| Product Dimensions | 118.9"L x 78.7"W x 61.4"H |
| Material | Pine Wood & MDF |
| Color | New Grey |
| Assembly Required | Yes |
| Box Spring Needed | No |
| Upper Bed Weight Capacity | 400 lbs |
| Lower Bed Weight Capacity | 400 lbs |
| Mattress Size (Inner) | 39.2'' x 76'' (Twin) |
| Included Components | Bed Frame, Guardrails, Ladders, Slats, 2 Drawers |
Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or contact Merax directly through their official website or customer service channels. Please have your model number (Twin & Twin Over Twin) and purchase date available when contacting support.
Contact Information: Please visit the official Merax website for the most up-to-date contact details.
