Polaroid PLD 1016/S/NEW Square Sunglasses User Manual

Introduction

Thank you for choosing Polaroid PLD 1016/S/NEW Square Sunglasses. These sunglasses are designed to provide comfort and glare reduction with polarized lenses, offering 100% UV protection. This manual provides essential information for the proper use, care, and maintenance of your new eyewear.

Setup and Initial Inspection

Upon receiving your Polaroid sunglasses, please perform the following steps:

1. Unpackaging: Carefully remove the sunglasses from their packaging. Retain the branded case or cloth pouch for storage.
2. Visual Inspection: Examine the sunglasses for any visible damage, scratches on the lenses, or loose components. If any issues are found, refer to the "Warranty and Support" section.
3. Fit Check: Gently place the sunglasses on your face to check for a comfortable and secure fit. The frame dimensions are 50mm lens width, 22mm bridge size, and 150mm temple size.

Image: Front view of the Polaroid PLD 1016/S/NEW Square Sunglasses, showcasing the Havana frame and green polarized lenses.

Operating Instructions

Your Polaroid sunglasses are designed for general use to protect your eyes from sunlight and reduce glare. They feature polarized lenses and 100% UV protection.

• Wearing: Place the sunglasses on your face, ensuring the temples rest comfortably over your ears and the nose pads sit gently on your nose bridge.
• Polarized Lenses: The polarized lenses reduce glare from reflective surfaces such as water, snow, and roads, enhancing visual clarity and comfort.
• UV Protection: The lenses provide 100% protection against harmful UVA and UVB rays.
• Limitations: These sunglasses are not intended for direct observation of the sun, use in solariums, or as eye protection against artificial light sources. They are also not suitable for driving at night or in conditions of poor visibility. This frame is not able to be fitted with prescription lenses.

Image: Side view of the Polaroid PLD 1016/S/NEW Square Sunglasses, highlighting the temple arm with the Polaroid logo.

Care and Maintenance

Proper care will extend the life and maintain the performance of your sunglasses.

• Cleaning: Clean lenses with a soft, clean microfiber cloth, preferably the one provided with your sunglasses. For stubborn dirt, use a mild soap solution or specialized lens cleaner and rinse with lukewarm water. Gently dry with a clean cloth. Avoid using abrasive cleaners or paper towels, which can scratch the lenses.
• Storage: When not in use, store your sunglasses in their branded case or cloth pouch to protect them from scratches and damage.
• Temperature: Avoid exposing sunglasses to high heat, such as leaving them on a car dashboard in direct sunlight, as this can warp the frame or damage the lens coatings.
• Handling: Always hold sunglasses by the frame, not the lenses, to avoid smudges and potential damage.

Image: Another side view of the Polaroid PLD 1016/S/NEW Square Sunglasses, detailing the hinge and the inner temple markings.

Troubleshooting

Image: Top view of the Polaroid PLD 1016/S/NEW Square Sunglasses, illustrating the full frame and lens alignment.

Specifications

• Model Number: PLD 1016/S/NEW
• Brand: Polaroid
• Frame Material: Plastic
• Lens Material: High-quality Plastic
• Lens Type: Polarized, 100% UV Protection
• Lens Width: 50 mm
• Lens Height: 41 mm
• Bridge Size: 22 mm
• Temple Size: 150 mm
• Department: Mens
• Care Instructions: Hand wash only, Avoid high heat
• Origin: Imported

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Polaroid offers quality eyewear, and any concerns should be directed to the appropriate support channels.

For general inquiries or to view more styles, you may visit the official Polaroid brand shop online.