Mivi DuoPods Vibe Wireless Earbuds User Manual

1. Introduction

Welcome to the Mivi DuoPods Vibe user manual. This guide provides essential information on how to set up, operate, maintain, and troubleshoot your new wireless earbuds. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

What's in the Box:

• Mivi DuoPods Vibe Earbuds
• Charging Case
• USB Type-C Charging Cable
• Eartips (various sizes)
• User Manual

Image: Mivi DuoPods Vibe earbuds and charging case.

2. Safety Information

To prevent damage to your device or injury to yourself and others, please observe the following safety precautions:

• Hearing Safety: Avoid listening at high volume levels for extended periods to prevent hearing damage.
• Driving Safety: Do not use earbuds while driving or cycling, or in situations where you need to hear ambient sounds.
• Water Resistance: The earbuds are IPX4.0 rated for sweat and splash resistance. Do not submerge them in water or expose them to heavy rain.
• Charging: Use only the provided charging cable and a certified charger. Do not attempt to charge if the port is wet.
• Disposal: Dispose of the device and its battery responsibly according to local regulations. Do not incinerate.

3. Setup

3.1. Charging the Earbuds and Case

Before first use, fully charge the Mivi DuoPods Vibe. Place the earbuds into the charging case and close the lid. Connect the USB Type-C cable to the charging port on the case and to a power source. The LED indicators on the case will show the charging status. A full charge takes approximately 1 hour for the earbuds and case.

Image: Earbuds in charging case.

3.2. Pairing with Your Device

1. Ensure the earbuds are charged.
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by flashing LED lights.
3. On your device (smartphone, tablet, laptop), enable Bluetooth.
4. Search for available Bluetooth devices and select "Mivi DuoPods Vibe" from the list.
5. Once connected, the earbuds' LED indicators will stop flashing.

The Mivi DuoPods Vibe supports dual connectivity, allowing seamless switching between two paired devices without manual re-pairing.

Image: Dual Connectivity feature.

4. Operating the Earbuds

4.1. Touch Controls

The Mivi DuoPods Vibe features intuitive touch controls on each earbud. Refer to the table below for common functions:

Image: Earbuds in use, highlighting touch control area.

4.2. Gaming Mode

The Mivi DuoPods Vibe features a dedicated Gaming Mode for ultra-low latency audio, ideal for gaming and video streaming. To activate or deactivate Gaming Mode, perform a long press (3 seconds) on either earbud. You will hear an audio prompt confirming the mode change.

4.3. AI-ENC for Clear Calls

Equipped with Artificial Intelligence Environmental Noise Cancellation (AI-ENC) and dual microphones, the earbuds intelligently filter out background noise, ensuring your voice is clear during calls, even in noisy environments.

Image: AI-ENC for clear calls.

5. Maintenance

5.1. Cleaning

• Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Remove eartips and clean them separately with mild soap and water if necessary, ensuring they are completely dry before reattaching.

5.2. Storage

When not in use, store the earbuds in their charging case to protect them from dust and damage. Store in a cool, dry place away from direct sunlight and extreme temperatures.

5.3. Water Resistance

The Mivi DuoPods Vibe has an IPX4.0 rating, meaning it is resistant to sweat and splashes. This does not mean it is waterproof. Avoid submerging the earbuds in water or exposing them to high-pressure water jets. Ensure the charging port is dry before charging.

6. Troubleshooting

If you encounter any issues with your Mivi DuoPods Vibe, please refer to the following common solutions:

• No Sound/Low Volume: Ensure earbuds are properly connected, volume is up on both earbuds and device, and earbuds are clean.
• Pairing Failure: Turn off Bluetooth on your device, place earbuds back in case, close and reopen. Re-enable Bluetooth and try pairing again. Ensure no other devices are trying to connect.
• One Earbud Not Working: Place both earbuds back in the case, close the lid for 5 seconds, then open. This often resets the connection.
• Charging Issues: Check the charging cable and adapter. Ensure the charging port on the case is clean and dry.
• Intermittent Connection: Ensure you are within the 10-meter Bluetooth range and there are no major obstructions between the earbuds and your device.

If the issue persists, try resetting the earbuds (refer to the full product manual for specific reset instructions if available) or contact customer support.

7. Specifications

Key technical specifications for the Mivi DuoPods Vibe:

Image: 13mm Bass Drivers with AI-ENC.

8. Warranty and Support

8.1. Warranty Information

The Mivi DuoPods Vibe comes with a 1-Year Manufacturer Warranty. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.

8.2. Customer Support

For any warranty claims, technical assistance, or product-related inquiries, please contact Mivi customer support:

• Call: +918099973333
• WhatsApp: +918688896578

Manufacturer Address: MIVI, Plot No, 29, Rd Number 76, Jubilee Hills, Hyderabad, Telangana 500033, India.