Introduction
This manual provides essential instructions for the safe and effective use of your Onerbl AC Power Cord, designed specifically for the GUGTTR SF-S6 Under Desk Elliptical Machine. This power supply allows you to operate your device or charge its battery from standard electrical power outlets. Please read this manual thoroughly before use.
Product Overview
Image 1: The Onerbl AC Power Cord, featuring a standard two-prong wall plug on one end and a barrel connector on the other, designed for connecting to the GUGTTR SF-S6 elliptical machine.
The Onerbl AC Power Cord is a high-quality replacement or spare power supply. It converts alternating current (AC) from a wall outlet to direct current (DC) required by your GUGTTR SF-S6 elliptical machine, ensuring stable and reliable power delivery.
Setup Instructions
- Unpack the Power Cord: Carefully remove the Onerbl AC Power Cord from its packaging. Inspect it for any visible damage.
- Locate the Power Input: Identify the power input port on your GUGTTR SF-S6 Under Desk Elliptical Machine. This is typically a circular port.
- Connect to Elliptical: Insert the barrel connector end of the Onerbl AC Power Cord firmly into the power input port of the elliptical machine. Ensure a snug fit.
- Connect to Power Outlet: Plug the two-prong end of the AC Power Cord into a standard, grounded electrical wall outlet.
- Verify Connection: Confirm that the elliptical machine powers on or indicates charging, if applicable.
Operating Instructions
Once the Onerbl AC Power Cord is correctly connected to both the GUGTTR SF-S6 elliptical machine and a power outlet, the elliptical machine is ready for use or charging. No further operation of the power cord itself is required.
- Ensure the power cord is not kinked or obstructed during use.
- Always use the power cord in a dry environment.
- Disconnect the power cord from the wall outlet when the elliptical machine is not in use for extended periods.
Maintenance and Care
- Cleaning: Disconnect the power cord from the wall outlet and the elliptical machine before cleaning. Wipe the cord and connectors with a dry, soft cloth. Do not use liquid cleaners.
- Storage: When not in use, coil the power cord loosely. Avoid tight coiling or bending, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the power cord for any signs of wear, cuts, fraying, or damage to the insulation or connectors. If any damage is observed, discontinue use immediately and replace the cord.
- Safety: Do not expose the power cord to water or excessive moisture. Do not attempt to repair a damaged power cord yourself.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Elliptical not powering on/charging. | Power cord not fully plugged in. Wall outlet not active. Damaged power cord. | Ensure both ends of the cord are securely connected. Test the wall outlet with another device. Inspect the cord for damage; replace if necessary. |
| Loose connection. | Connector not fully inserted. Worn port on elliptical. | Push the connector firmly into the port. If the port is worn, contact GUGTTR support for elliptical repair. |
Specifications
- Brand: Onerbl
- Color: Black
- Special Feature: Short Circuit Protection
- Compatibility: GUGTTR SF-S6 SFS6 Under Desk Elliptical Machine
- Manufacturer: Shenzhen Waweis Technology Co., Ltd
Warranty and Support
Onerbl products are manufactured to high standards. For specific warranty information, please refer to the packaging or contact your retailer. If you encounter any issues or require technical assistance, please contact Onerbl customer support through the retailer's platform or the official Onerbl website.