Introduction
Thank you for choosing the Generic Scandinavian Adjustable Wall Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Product Specifications
This modern wall lamp is designed to enhance your living spaces with its sleek and functional design. Crafted from durable iron art, it features an adjustable arm for versatile lighting.
- Product Name: Wall Lamp
- Style: Modern and Simple
- Color: Black
- Material: Iron Art
- Dimensions: Diameter: 13cm (5.12in), Height: 16cm (6.3in), Adjustable Arm Length: 40cm (15.76in)
- Suitable Space: 5-10 square meters
- Lamp Holder: E27 (bulb not included)
- Voltage: 110-240V
- Certifications: 3C, UL, CE
- Batteries required: No
Setup and Installation
Safety Warning: Before beginning installation, ensure the power supply to the installation area is turned off at the circuit breaker. If you are unsure about electrical wiring, consult a qualified electrician.
Included Components:
- 1 x Wall Lamp fixture
- 1 x Installation Accessories (screws, wall anchors)
Installation Steps:
- Prepare the Installation Area: Choose a suitable location on the wall. Ensure there is an existing electrical junction box or prepare for new wiring according to local electrical codes.
- Mount the Mounting Plate: Attach the lamp's mounting plate to the wall junction box using the provided screws. If no junction box is present, use appropriate wall anchors for secure fastening.
- Connect Wiring: Carefully connect the electrical wires from the wall to the lamp fixture. Typically, this involves connecting live to live (black/brown), neutral to neutral (white/blue), and ground to ground (green/yellow). Ensure all connections are secure and insulated with wire nuts.
- Attach the Fixture: Secure the lamp fixture to the mounting plate using the provided screws.
- Install the Bulb: Screw an E27 bulb (not included) into the lamp holder. Do not overtighten.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
The lamp is designed for easy assembly and wall-mounted installation. The included screws facilitate a straightforward setup process.
Operating Instructions
This wall lamp features an adjustable arm and rotatable joints, allowing you to customize the direction and angle of light. Once installed, you can easily position the lamp head to direct illumination precisely where needed.
- Adjusting the Arm: Gently move the lamp arm at its pivot points to extend or retract it.
- Rotating the Lamp Head: The lamp head can be rotated to direct light horizontally or vertically.
Always adjust the lamp by holding the arm or shade firmly. Avoid excessive force to prevent damage to the joints or wiring.
Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your wall lamp.
- Cleaning: Before cleaning, ensure the power to the lamp is turned off. Wipe the lamp with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents, as these can damage the finish.
- Bulb Replacement: Always turn off the power before replacing the bulb. Allow the old bulb to cool completely before removing it. Use only E27 base bulbs within the recommended wattage.
- Inspections: Periodically check all connections and mounting screws to ensure they remain tight and secure.
Troubleshooting
If you encounter issues with your wall lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up | No power supply Faulty bulb Loose wiring connection | Check circuit breaker and wall switch. Replace the bulb with a new, working E27 bulb. Turn off power, then check and secure all wiring connections. |
| Light flickers | Loose bulb Incompatible bulb Loose wiring | Tighten the bulb. Ensure the bulb is compatible with the fixture and voltage. Turn off power, then check and secure all wiring connections. |
| Lamp arm is stiff or difficult to adjust | Joints require lubrication Over-tightened fasteners | Apply a small amount of silicone-based lubricant to the joints. Check if any fasteners on the joints are excessively tight; loosen slightly if necessary. |
Warranty Information
This product comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Customer Support
Should you have any questions, require assistance with installation, or need support regarding your Generic Scandinavian Adjustable Wall Lamp, please do not hesitate to reach out to our customer service team. We are committed to providing prompt and helpful support within 24 hours.
Please refer to your purchase documentation for specific contact details.
