iGPSPORT HR50 Heart Rate Monitor Chest Strap User Manual

1. Introduction

The iGPSPORT HR50 is a versatile heart rate monitor designed for various fitness activities including cycling, running, jogging, yoga, and general fitness. It features Bluetooth and ANT+ connectivity, IPX7 waterproofing, and a comfortable, adjustable chest strap. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Package Contents

The iGPSPORT HR50 package includes the following items:

• 1 x HR50 Heart Rate Sensor
• 1 x Adjustable Chest Strap
• 1 x CR2032 Button Battery
• 1 x User Manual

Image: The iGPSPORT HR50 heart rate monitor sensor and its accompanying adjustable chest strap, as typically found in the product package.

3. Setup

3.1 Battery Installation

The HR50 uses a CR2032 button battery. Follow these steps to install or replace the battery:

1. Slide the battery cover to unlock it, then open it.
2. Remove the battery insulation strip (if present).
3. Insert the CR2032 battery with the positive side facing up. Confirm that the front indicator light flashes to ensure the battery is installed correctly.
4. Close the battery compartment and rotate it to lock.

3.2 Attaching the Sensor to the Chest Strap

Attach the HR50 sensor to the chest strap using the two snap buttons. Ensure it is securely fastened.

Image: The iGPSPORT HR50 sensor securely fastened to the black elastic chest strap via two snap buttons.

4. Operating Instructions

4.1 Wearing the Chest Strap

1. Wet the two electrode areas on the back of the chest strap with water before wearing. This improves conductivity for accurate heart rate detection.
2. Install the HR50 sensor onto the chest strap with the iGPSPORT logo facing up.
3. Adjust the strap to fit your chest comfortably and snugly, ensuring the monitor rests just below the center of your chest. The strap should be tight enough to stay in place but not restrict breathing.
4. Fasten the strap securely.

Image: A composite image illustrating the steps for wearing the iGPSPORT HR50 chest strap, including wetting electrodes, attaching the sensor, and adjusting the strap for a proper fit.

4.2 Connecting to Devices (Bluetooth & ANT+)

The iGPSPORT HR50 supports both Bluetooth and ANT+ protocols, allowing connection to a wide range of devices and fitness apps.

Connecting to a GPS Bike Computer (ANT+)

1. Power on your GPS bike computer and enter the Settings page.
2. Find the "Sensor Connections" option.
3. Select "Add Heart Rate Device" or similar.
4. Search for and add the HR50 heart rate monitor.
5. After successful pairing, the bike computer will display "Heart Rate Connected" or similar confirmation.
6. Return to the cycling page, and your heart rate data will be displayed.

Connecting to a Fitness App (Bluetooth)

1. Ensure Bluetooth is enabled on your smartphone.
2. Open your preferred fitness app (e.g., Strava, Wahoo, Zwift, Nike Run Club).
3. Navigate to the "Devices" or "Sensors" section within the app.
4. Select "Add New Sensor" or "Pair Device" and choose the HR50 from the list of available devices.
5. Confirm the connection. Your heart rate data will now be streamed to the app.

4.3 Indicator Lights

The HR50 features an indicator light to communicate its status:

• Red light flashes: Power on, but no heart rate reading.
• Green light flashes: Heart rate reading detected. (The green light flashes 6 times and then automatically turns off while the monitor remains working.)

Image: A section of a composite image illustrating the meaning of the HR50's indicator lights: red for no heart rate detected and green for active heart rate detection.

5. Maintenance

5.1 Cleaning the Sensor (Host)

After each use, remove the sensor from the chest strap and wipe it with a soft, dry towel. Do not use alcohol or any abrasive materials (such as steel wool or chemical cleaners) on the sensor.

Image: A close-up of the iGPSPORT HR50 sensor with text overlay instructing to wipe it with a soft towel after use and to avoid alcohol or abrasive materials.

5.2 Cleaning the Chest Strap

Rinse the chest strap with clean water (around 25°C) after each use. Wipe it with a soft towel and hang or lay it flat to air dry naturally. Do not soak, dry clean, iron, or bleach the chest strap. Avoid stretching the chest strap violently or bending the electrode areas.

Image: A close-up of the iGPSPORT HR50 chest strap with text overlay instructing to rinse it with clean water, wipe, and air dry, while avoiding harsh cleaning methods.

5.3 Storage

For extended storage, remove the heart rate sensor from the strap to maximize battery life. Store in a cool, dry place.

6. Troubleshooting

6.1 Inaccurate Readings

• Ensure electrodes are wet: The electrode pads on the strap must be moistened to ensure proper skin contact and conductivity.
• Check strap fit: The strap should be snug against your skin, but not uncomfortably tight. Adjust for optimal contact.
• Excessive moisture: While the device is waterproof, excessive sweat or water between the sensor and skin can sometimes interfere with readings. Ensure proper contact.
• Battery level: A low battery can affect performance. Check the indicator light or replace the CR2032 battery if needed.

6.2 Connection Issues

• Restart devices: Try restarting both the HR50 sensor (by removing and reinserting the battery) and your connecting device (smartphone/bike computer).
• Check Bluetooth/ANT+ settings: Ensure Bluetooth or ANT+ is enabled on your receiving device and that the HR50 is within range.
• Forget and re-pair: If issues persist, try "forgetting" the device in your app/computer settings and then re-pairing it.
• App compatibility: Ensure your fitness app is compatible with external heart rate monitors and supports Bluetooth/ANT+ protocols.

7. Specifications

Image: A close-up image of the iGPSPORT HR50 sensor, highlighting its compact dimensions.

8. Warranty Information

The iGPSPORT HR50 comes with a 1-year warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official iGPSPORT website or contact customer support.

9. Support

For further assistance, product updates, or to explore other iGPSPORT products, please visit the official iGPSPORT website: iGPSPORT Store on Amazon.

You can also refer to the Quick Start Manual included in your package for additional information.