1. Product Overview
The YITAMOTOR Low-Profile Hard Tri-Fold Truck Bed Tonneau Cover is designed to provide secure and weather-resistant protection for your truck bed cargo. Its low-profile design integrates seamlessly with your truck's aesthetics, offering both functionality and a clean appearance. The tri-fold mechanism allows for flexible bed access, making it suitable for various hauling needs.
Key Features:
- Precision Fit: Specifically designed for Ram 1500 New Body Style 5.7' bed models from 2019-2026, excluding trucks with Rambox and Split Tailgate.
- Streamlined Design: Low-profile construction follows truck contours for a sleek look.
- Tri-Fold Access: Offers 2/3 bed access for bulky items or 1/3 access for quick retrieval, secured by nylon buckles.
- One-Handed Operation: Simple latch system for quick and easy opening and closing.
- Durable & Weather-Ready: Equipped with weather seals and drainage tubes to protect cargo from rain, dirt, and road debris.
2. Compatibility
This tonneau cover is compatible with the following vehicle specifications:
- Make: Ram
- Model: 1500 New Body Style
- Bed Size: 5.7 ft (67.4 inches)
- Model Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
- Exclusions: Not compatible with trucks equipped with Rambox or Split Tailgate.

Image: Confirm your truck bed size. This cover is designed for 5'7" short beds and is not compatible with standard 6'4" or long 8' beds, nor trucks with Rambox.
3. What's in the Box
The package includes the following components:
- 1 x Low-Profile Hard Tri-Fold Bed Cover
- Installation hardware (clamps, bolts, nuts)
- Weather seals/gaskets
- Drainage tubes
4. Setup & Installation
Follow these steps for proper installation of your tonneau cover. It is recommended to have a second person assist with positioning the cover.
4.1 Prepare the Truck Bed
- Clean the truck bed rails thoroughly to ensure proper adhesion of weather seals.
- Apply the provided foam gasket along the front bulkhead of the truck bed, ensuring a tight seal against the cab.

Image: A person applying the gasket to the front bulkhead of the truck bed. This step ensures a watertight seal between the cover and the truck cab.
4.2 Position the Tonneau Cover
- With the cover in its folded position, carefully place it onto the front of the truck bed rails, aligning it squarely.
- Ensure the front edge of the cover is flush with the bulkhead.
4.3 Install Bed Rails and Brackets
- Place the bed rails along the sides of the truck bed.
- Attach the provided brackets to secure the cover to the truck bed rails. Tighten the bolts and nuts firmly but do not overtighten.

Image: Illustrates the process of installing the bed rails and securing them with clamps on both sides of the truck bed.
4.4 Install Drainage Tubes
- Connect the drainage tubes to the designated ports on the cover's frame.
- Route the tubes through the truck bed's drain holes to direct water away from the cargo area.
4.5 Final Adjustments
- Unfold the cover completely and check for proper alignment and tension.
- Ensure all clamps are securely fastened and the cover sits flush on the bed rails.

Image: A close-up view of the secure installation parts, highlighting the water-resistant strap, easy installation clamps, tension-latch system, and the overall low-profile design of the tonneau cover.
4.6 Installation Video Guide
For a visual guide on the installation process, please refer to the official YITAMOTOR installation video below:
Video: Official YITAMOTOR installation guide for the Low-Profile Hard Tri-Fold Tonneau Cover, demonstrating the steps from unboxing to final securement.
5. Operating Instructions
The tri-fold design allows for versatile access to your truck bed.
5.1 Opening the Cover
- To open the cover, release the rear latches located on the underside of the cover near the tailgate.
- Fold the rear panel towards the cab.
- For 2/3 bed access, release the middle latches and fold the second panel.
- Secure the folded panels using the integrated nylon buckles near the cab to prevent movement during transit.

Image: Demonstrates the flexibility of the tri-fold cover, showing full coverage, partial access, and two-thirds bed access options.
5.2 Closing the Cover
- Release the nylon buckles securing the folded panels.
- Carefully unfold the panels towards the tailgate, ensuring each section lays flat and aligns with the bed rails.
- Press down firmly on each panel to engage the latches and secure the cover.

Image: The tonneau cover fully closed, highlighting its low-profile and secure fit, providing complete coverage for the truck bed.
6. Maintenance
Regular maintenance will extend the life and appearance of your tonneau cover.
- Cleaning: Wash the cover regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners that can damage the material.
- Seals Inspection: Periodically inspect the weather seals around the perimeter of the cover and along the folds for any signs of wear or damage. Replace if necessary to maintain water resistance.
- Hardware Check: Ensure all clamps, bolts, and latches are secure. Tighten any loose hardware as needed.
- Drainage Tubes: Check drainage tubes for blockages and clear any debris to ensure proper water runoff.

Image: A truck with the tonneau cover installed, shown in rainy conditions, illustrating the cover's water-resistant capabilities.
7. Troubleshooting
If you encounter any issues with your tonneau cover, consider the following common solutions:
- Water Leakage: Check all weather seals for proper placement and damage. Ensure drainage tubes are clear and correctly routed. Verify the front bulkhead gasket is securely in place.
- Difficulty Latching/Unlatching: Inspect latches for any obstructions or damage. Ensure the cover is properly aligned on the bed rails. Adjust tension if necessary.
- Cover Not Sitting Flush: Recheck the alignment of the cover on the bed rails. Ensure all clamps are evenly tightened.
If problems persist after attempting these solutions, please contact YITAMOTOR customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | YITAMOTOR |
| Style | Low-Profile Hard 3-Fold |
| Exterior Finish | Aluminum |
| Material | PP Honeycomb Aluminum |
| Lock Type | Tailgate |
| Manufacturer Part Number | MAYIMvu1n1 |
| Automotive Fit Type | Vehicle Specific Fit |
| Included Components | 1 low-profile hard tri-fold bed cover |
| Item Type Name | Tonneau Cover |
| GTIN (UPC) | 199449629146 |
9. Warranty & Support
This YITAMOTOR Low-Profile Hard Tri-Fold Truck Bed Tonneau Cover comes with a 1-year manufacturer warranty.
For warranty claims, technical support, or any product-related inquiries, please contact YITAMOTOR customer service through their official website or the retailer where the product was purchased. Please have your model number (MAYIMvu1n1) and proof of purchase available when contacting support.