1. Introduction
Thank you for choosing the EENOUR U1200 Golf Rangefinder. This device is designed to provide accurate distance measurements for golf, hunting, and other outdoor activities. It features 7X magnification, a 1200-yard range, slope compensation, pin lock with vibration, and a durable, waterproof design. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
2. Safety Information
- Laser Safety: This product uses a Class 1 laser. Do not stare directly into the laser beam or aim it at others. Direct eye exposure to the laser can cause permanent eye damage.
- Do Not Disassemble: Attempting to disassemble, modify, or repair the device may cause damage and will void the warranty.
- Water Resistance: The device is IP54 rated, meaning it is dust-resistant and splash-proof. Do not immerse it in water.
- Battery Safety: Use only the provided charging cable. Do not expose the battery to extreme temperatures or dispose of it in fire.
- Children: Keep the device out of reach of children.
3. Package Contents
Verify that all items are present in your package:
- EENOUR U1200 Golf Rangefinder
- Storage Case
- USB Type-C Charging Cable
- Cleaning Cloth
- Hand Strap
- Mountaineering Buckle (Carabiner)
- User Manual (this document)
- Quick-Start Card

4. Product Overview
The EENOUR U1200 Golf Rangefinder features a compact design with intuitive controls.

4.1 Components
- Objective Lens: 23.5mm extra-large lens for a wider field of view and 95%+ light transmittance.
- Eyepiece/Diopter Adjustment: Rotate to adjust focus for clear viewing.
- Power/Measurement Button: Press to power on and initiate measurements.
- Mode Button: Press to cycle through different measurement modes.
- Slope Switch: Activates or deactivates the slope compensation function. A side-mounted indicator light shows its status.
- Magnetic Strip: Located on the side for secure attachment to golf carts.
- USB-C Charging Port: For recharging the internal battery.

5. Setup
5.1 Charging the Battery
The EENOUR U1200 is equipped with a rechargeable lithium-ion battery. Before first use, fully charge the device.
- Connect the provided USB Type-C cable to the charging port on the rangefinder.
- Connect the other end of the cable to a USB power source (e.g., computer, wall adapter).
- The charging indicator light will illuminate. Once fully charged, the light will change or turn off (refer to the quick-start guide for specific indicator behavior).
- A full charge provides approximately 20,000 measurements.
5.2 Powering On/Off
- Power On: Press the Power/Measurement button once to turn on the device. The display will activate.
- Auto Shut-off: The device will automatically power off after 20 seconds of inactivity to conserve battery.
5.3 Diopter Adjustment
To ensure a clear view through the eyepiece, adjust the diopter:
- Look through the eyepiece.
- Rotate the eyepiece knob until the display and target appear sharp and in focus.
5.4 Unit Switching (Yards/Meters)
To switch between yards (Y) and meters (M):
- With the device powered on, press and hold the Mode button for approximately 3 seconds. The unit will toggle between Y and M.
6. Operating Instructions
The EENOUR U1200 offers six measurement modes to suit various needs.

6.1 Mode Selection
Press the Mode button repeatedly to cycle through the available measurement modes:
- Straight-Line Distance Mode
- Scan Mode
- Flag-Lock Mode
- Slope Compensation Mode (Golf Compensation)
- Horizontal/Vertical Distance Measurement Mode
- Speed Measurement Mode
6.2 Straight-Line Distance Measurement
This is the default mode for measuring the direct distance to a target.
- Aim the reticle at your desired target.
- Press the Power/Measurement button once. The distance will be displayed instantly (0.04 seconds response time).
6.3 Scan Mode
For continuous measurement of multiple targets or moving objects.
- Enter Scan Mode.
- Press and hold the Power/Measurement button while sweeping the rangefinder across different targets. The display will update distances continuously.
6.4 Flag-Lock with Vibration Alert
This mode helps to lock onto the flagstick, ignoring background objects, and provides a vibration alert when locked.
- Enter Flag-Lock Mode.
- Aim the reticle at the flagstick.
- Press and hold the Power/Measurement button. Slowly move the reticle across the flagstick. The device will vibrate and display the distance to the flag once locked.

6.5 Slope Compensation (Golf Compensation)
This mode calculates the adjusted distance based on elevation changes, providing a more accurate







