Saker Mattress Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Saker Mattress Vacuum Cleaner. This handheld device is designed for deep cleaning mattresses, sofas, and other upholstered surfaces, effectively removing dust, debris, and allergens. It features 16KPa strong suction, UV-C light for sanitization, 140°F heated air for drying, a HEPA filtration system, and an aroma function for a fresh scent. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using an electrical appliance.

• Read all instructions before using the appliance.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with a damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust cup and/or filters in place.
• The UV-C light automatically activates when the vacuum is placed on a surface and deactivates when lifted, ensuring safe operation. Avoid direct exposure to eyes and skin.

3. Product Overview

Familiarize yourself with the components of your Saker Mattress Vacuum Cleaner.

Key Features:

• 16KPa Strong Suction: Powerful suction to extract deep-seated dust and debris.
• UV-C Light: Integrated UV-C lamp for sanitization, activating upon contact with surfaces.
• 140°F Heated Air: Warm airflow to refresh fabrics and reduce moisture.
• 36,000 RPM High-Speed Tapping: Vibrating function to loosen embedded particles.
• 5-Stage Cyclonic Filtration with HEPA Filter: Multi-layer system for efficient dust separation and air purification.
• Aroma Compartment: Allows for the addition of scent pads to release a fresh fragrance during cleaning.
• Smart Display: Digital screen showing dust intake percentage and power levels.
• 16.4 FT Power Cord: Provides extended reach for convenient cleaning.

4. Setup

Before first use, ensure all packaging materials are removed and the device is assembled correctly.

1. Unpack: Carefully remove the vacuum cleaner and all accessories from the packaging.
2. Inspect: Check the device for any signs of damage. Do not use if damaged.
3. Connect Power: Plug the 16.4 ft power cord into a suitable electrical outlet.
4. Optional: Insert Aroma Pad:
   • Locate the aroma compartment on the device.
   • Push down to open the aroma cover.
   • Insert a compatible aroma pad (Ø18.5 mm × 6.5 mm) into the compartment.
   • Close the aroma cover tightly.

   

5. Operating Instructions

Follow these steps to effectively clean your surfaces with the Saker Mattress Vacuum Cleaner.

1. Power On: Press the power switch button located on the handle to turn on the vacuum cleaner. The smart display will illuminate.
2. Select Mode (if applicable): The smart display shows real-time dust intake percentage and power levels. Adjust settings as needed for different cleaning tasks.
3. Begin Cleaning: Place the vacuum cleaner head flat against the surface you wish to clean (e.g., mattress, sofa, couch). The UV-C light will automatically activate when the device senses contact with a surface.
4. Move Slowly: Glide the vacuum cleaner slowly and evenly across the surface. The 36,000 RPM tapping function will loosen embedded dust, and the 140°F heated air will help refresh and dry the fabric.
5. Monitor Display: Observe the smart display for real-time feedback on dust intake and power.
6. Targeted Cleaning: For heavily soiled areas, you may need to make multiple passes.
7. Power Off: Once cleaning is complete, lift the vacuum cleaner from the surface (UV-C light will turn off) and press the power switch button to turn off the device. Unplug the power cord from the outlet.

Official Product Video:

6. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

1. Emptying the Dust Cup:
   • Press the button to release the dust cup assembly from the main unit.
   • Position the dust cup over a trash bin.
   • Press the one-click empty button to release collected dust and debris.
2. Cleaning the Dust Cup and Filters:
   • Separate the filter components from the dust cup (fine filter cotton, steel mesh filter assembly).
   • Wash the dust cup and non-electrical filter components with water. Ensure they are completely dry before reassembling.
   • The HEPA filter should be cleaned regularly by tapping out dust. Do not wash the HEPA filter unless specified by the manufacturer.

   

3. Cleaning the Roller Brush:
   • The roller brush features a one-pull quick-release design for easy removal.
   • Pull the roller brush out from its housing.
   • Remove any tangled hair or debris from the brush. You may wash it with water if necessary, ensuring it is completely dry before reinserting.

   

4. Reassembly: Ensure all components are dry and correctly reassembled before next use.

7. Troubleshooting

If you encounter issues with your Saker Mattress Vacuum Cleaner, refer to the following table for common problems and solutions.

If the problem persists after trying these solutions, please contact Saker customer support for assistance.

8. Specifications

9. Warranty and Support

Saker products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Saker website. Please retain your proof of purchase for any warranty claims.