Godox iT32 TTL Flash with X5O Trigger for Olympus & Panasonic User Manual

1. Introduction

Thank you for choosing the Godox iT32 TTL Flash with X5O Trigger. This all-in-one flash kit is designed for Olympus and Panasonic cameras, offering versatile and portable lighting solutions. It features automatic TTL, Manual, and Stroboscopic modes, along with Godox's 2.4 GHz wireless system for enhanced creative control.

Key Features:

• All-in-one TTL Flash Kit for Olympus & Panasonic: Compatible with automatic TTL, Manual, and Stroboscopic modes, and with Godox's 2.4 GHz wireless system, the iT32 kit with X5O trigger allows versatile and portable lighting configurations. Simply align the X5O trigger to the base of the iT32 and the flash will automatically recognize it for immediate attachment.
• Advanced Wireless Triggering System: Remove the X5O trigger and mount it on your camera's hot-shoe to control the iT32 flash wirelessly up to 20m. Used together (iT32+X5 mode), the X5O can also synchronize other Godox flashes, expanding creative possibilities (consult the manual for details). As a transmitting unit, it supports Godox X system illuminators, including AD100Pro II, AD200Pro II, AD600Pro II, AD600BM II, iT30Pro, V100, V480, and Lux Master, with a maximum distance of 80m.
• High-Speed Sync (HSS) & Intelligent TTL Control: Supports HSS 1/8000s, first and second curtain sync, and FEC adjustment. The TTL function automatically adjusts flash output to ensure balanced exposure between subject and background.
• Compact Design with Touchscreen & Integrated Battery: The clear touchscreen and simplified buttons make operation intuitive. The 7.2V 900mAh lithium battery offers approximately 70 minutes of use at maximum power and recharges via USB-C in about 70 minutes. The flash also includes an adjustable LED modeling light, a magnetic diffuser, color filters, and a mini stand — perfect for travel or outdoor sessions.
• Important Note on X5O Trigger Usage: The X5O trigger does not have a physical ON/OFF switch but uses LED indicators. It magnetically connects to the iT32 for charging and to display battery status. It contains an internal 3.8V 100mAh battery, which takes about 3 hours for a full charge and offers up to 16 hours of standby. Consult product details and the manual before purchase to ensure compatibility and correct use.

2. What's in the Box

• 1× Godox iT32 TTL Mini Flash
• 1× Flash Trigger X5
• 1× Diffuser and Mini Magnetic Stand
• 1× Magnetic Color Filter (1/2 Orange) + (1/1 Orange)
• 1× USB-C Charging Cable and Carrying Bag

3. Setup

3.1 Unboxing and Initial Inspection

Upon receiving your Godox iT32 TTL Flash and X5O Trigger kit, carefully unpack all components and inspect them for any signs of damage. Ensure all items listed in the 'What's in the Box' section are present.

3.2 Charging the Battery

The iT32 flash and X5O trigger both contain integrated lithium batteries. Connect the supplied USB-C cable to the iT32 flash for charging. The X5O trigger charges magnetically when attached to the iT32. A full charge for the iT32 takes approximately 70 minutes, while the X5O trigger requires about 3 hours for a full charge.

Image: A collage showing the Godox iT32 flash's touchscreen control, rotated flash head, built-in reflector and diffuser, and USB-C fast charging capability.

3.3 Attaching the X5O Trigger and iT32 Flash

1. Insert the X5O flash trigger into your camera's hot shoe and lock it in place.
2. Magnetically attach the iT32 flash unit to the X5O trigger. The flash will automatically recognize the trigger.

3.4 Powering On

Long-press the power button on the iT32 flash until the instruction to unlock appears on the screen. Swipe the screen or rotate the dial clockwise to power on the unit.

4. Operating Instructions

4.1 On-Camera Mode

When the iT32 flash is attached to the X5O trigger on your camera's hot shoe, it operates in on-camera mode. You can adjust flash settings directly on the iT32's touchscreen or using the dial and buttons.

4.1.1 M Mode (Manual Mode)

In Manual mode, you control the flash power output. There are three ways to adjust flash power (from 1/1 to 1/256):

• Tap the "+" or "-" icons to change in ±0.3 increments.
• Slide the bar for rapid power changes.
• Turn the dial to fine-tune flash output.

4.1.2 TTL Mode (Through-The-Lens)

Swipe down on the touchscreen to switch to TTL mode. In this mode, the flash automatically adjusts its output based on the camera's metering. You can drag the yellow slider to adjust flash exposure compensation (FEC).

4.1.3 Exposure Distance Indicator

Adjust your camera settings to display the correct flash distance range on the iT32 screen.

4.2 Off-Camera Mode

Separate the iT32 flash from the X5O trigger to seamlessly switch to off-camera flash mode. Mount the X5O trigger on your camera's hot shoe to control the iT32 wirelessly.

4.2.1 Button Control on X5O Trigger

• Press "+" or "-" to increase/decrease exposure.
• Long press "M" to switch between M and TTL mode.
• Long press "-" to check the X5O's battery status. Red indicator light flashes: 1 flash = low battery, 4 flashes = fully charged; pattern repeats.

4.3 Godox 2.4GHz Wireless X System

The iT32 integrates the 2.4G X System to pair with slave flashes. After pairing, an X5 transmitter can fire these slaved units along. However, the X5 cannot remotely adjust the power output of any non-iT32 Godox slaves.

4.3.1 Sender Mode

Swipe down on the iT32 screen to enter Sender mode. Pair with other Godox 2.4 GHz wireless flashes. The iT32 light unit seamlessly switches between X5 trigger versions (e.g., X5C, X5S).

4.3.2 Receiver Mode

Syncs wirelessly with X3Pro / X3 trigger. Tap to sync channel & ID with X3Pro / X3 trigger quickly.

4.3.3 Wireless Settings

Manually set the channel or ID for wireless communication.

4.4 Other Functions

4.4.1 Reflector & Diffuser

The iT32 includes a built-in reflector and a wide-angle diffuser for light shaping.

4.4.2 Magnetic Accessories (MA02)

The flash supports magnetic accessories like color filters (e.g., 1/2 Orange, 1/1 Orange) for creative lighting effects.

Image: The Godox iT32 flash shown with various magnetic color filters and accessories, highlighting its modular design.

4.4.3 Modeling Light

The iT32 features a 10-level adjustable LED modeling lamp for previewing lighting effects.

4.4.4 Sync Mode

The flash supports Front-curtain, High-speed (HSS), and Rear-curtain sync modes.

4.4.5 Flash Mode

Switch between M (Manual), TTL (Through-The-Lens), and Multi (Stroboscopic) flash modes.

4.4.6 Stroboscopic Flash

Configure the stroboscopic flash settings for multiple flashes during a single exposure.

5. Maintenance

5.1 Cleaning

Regularly clean the flash unit and trigger with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid using harsh chemicals or abrasive materials.

5.2 Storage

When not in use, store the flash and trigger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the batteries are partially charged (around 50%) before long-term storage to prolong battery life.

5.3 Battery Care

To maintain optimal battery performance, avoid fully discharging the batteries frequently. Recharge them regularly, even if not in constant use. If the unit will not be used for an extended period, charge it every three months.

6. Troubleshooting

6.1 Flash Not Firing

• Check Battery: Ensure both the iT32 flash and X5O trigger are sufficiently charged.
• Proper Connection: Verify that the X5O trigger is securely mounted on the camera's hot shoe and the iT32 flash is magnetically attached to the X5O.
• Mode Settings: Confirm that the flash mode (TTL, M, Multi) is correctly selected and compatible with your camera settings.
• Wireless Sync: If using off-camera, ensure the channel and ID settings on both the trigger and flash are matched.
• Camera Settings: Check your camera's flash settings and ensure external flash is enabled.

6.2 Inconsistent Exposure

• TTL Mode: Adjust Flash Exposure Compensation (FEC) if shots are consistently over or underexposed.
• M Mode: Manually adjust flash power output.
• Distance: Ensure the subject is within the effective flash range.
• Ambient Light: Consider ambient light conditions and adjust camera ISO, aperture, and shutter speed accordingly.

6.3 Wireless Communication Issues

• Channel/ID Mismatch: Double-check that the channel and ID settings on the trigger and flash are identical.
• Distance: Ensure the flash and trigger are within the effective wireless range (up to 20m for direct control, 80m for X system illuminators).
• Interference: Move away from potential sources of 2.4GHz interference.

7. Specifications

8. Warranty and Support

Godox products are covered by a limited warranty against defects in materials and workmanship. The specific warranty period may vary by region and product type. Please retain your proof of purchase for warranty claims.

8.1 Technical Support

For technical assistance, troubleshooting, or service inquiries, please contact your authorized Godox dealer or visit the official Godox website for support resources and contact information.

Always refer to the latest version of the product manual available on the manufacturer's website for the most up-to-date information and safety guidelines.