Zomolither Android 15 Car Stereo User Manual

Introduction

This manual provides comprehensive instructions for the Zomolither Android 15 Car Stereo, model 4G+64G, specifically designed for Honda Civic vehicles manufactured between 2013 and 2017. It covers product features, installation guidelines, operating procedures, specifications, and basic troubleshooting to ensure optimal performance and user experience.

The unit features a 9-inch 1280x720 Incell touchscreen, Wireless CarPlay, Android Auto, Bluetooth 5.0, GPS navigation, FM/RDS radio, 32-band equalizer, and supports steering wheel controls and AHD backup cameras.

Image: Zomolither Android 15 Car Stereo installed in a Honda Civic dashboard, showing the sleek 9-inch touchscreen display.

Vehicle Compatibility

This car stereo is compatible with Honda Civic models from 2013 to 2017. It is designed for vehicles with a low-configuration central console, specifically those without a factory-installed large screen.

Image: A visual comparison showing the Honda Civic dashboard before and after the Zomolither car stereo installation, highlighting the integrated look and larger screen.

Package Contents

Verify that all items are present in the package before proceeding with installation:

• 1 x Car Stereo
• 2 x Power Cables
• 1 x Original USB Cable
• 1 x Canbus
• 1 x GPS Antenna
• 1 x Rear Camera Input Cable
• 1 x RCA Cable
• 2 x USB Cables
• 1 x External Microphone
• 1 x Rear View Camera
• 1 x Installation Tools
• 1 x Instruction Manual (this document)

Installation and Initial Setup

Professional installation is recommended for this car stereo system. Ensure the vehicle's power is disconnected before beginning installation. Refer to the wiring diagrams provided for correct connections.

Wiring Diagram for Backup Camera

The backup camera wiring is crucial for proper functionality. Follow these steps:

1. Connect the Red Cable (1) to the positive pole of the car's reversing light cable.
2. Connect the Black Cable (2) to the negative pole of the car's reversing light cable.
3. The other two red extension cables (3 and 4) do not need to be connected.

Image: Detailed wiring diagram illustrating the connections for the backup camera, showing red and black cables for power and ground.

First Power On

After installation, turn on your vehicle's ignition. The car stereo should power on automatically. Follow any on-screen prompts for initial setup, such as language selection and time zone.

Operating Instructions

This section details the various functions and how to operate your Zomolither Android 15 Car Stereo.

Product Multifunction Display Video

1. Wireless CarPlay Connection

To connect your iPhone wirelessly via CarPlay:

1. Open the "S-Play" application on the car stereo.
2. On your iPhone, go to Settings > Bluetooth and ensure Bluetooth is enabled.
3. Pair your iPhone with the car stereo's Bluetooth (device name typically starts with "BLINK_UNW"). Confirm the pairing request on both devices.
4. Once Bluetooth is connected, a prompt to "Connect to CarPlay" may appear on your iPhone. Tap "Turn on WLAN & Connect" or similar.
5. CarPlay will automatically launch on the car stereo, mirroring your iPhone's compatible apps.

Refer to the "Product Multifunction Display Video" above for a visual guide on Wireless CarPlay connection (starts at 0:00).

2. Wireless Android Auto Connection

To connect your Android phone wirelessly via Android Auto:

1. Open the "S-Play" application on the car stereo.
2. On your Android phone, go to Settings > Connected devices > Connection preferences > Bluetooth and ensure Bluetooth is enabled.
3. Pair your Android phone with the car stereo's Bluetooth (device name typically starts with "BLINK_UNW"). Confirm the pairing request on both devices.
4. Once Bluetooth is connected, Android Auto will automatically launch on the car stereo, mirroring your Android phone's compatible apps.

Refer to the "Product Multifunction Display Video" above for a visual guide on Wireless Android Auto connection (starts at 0:58).

3. Wireless Jlink (Mirror Link) Connection

Jlink allows you to mirror your phone's screen to the car stereo. This function requires a Wi-Fi hotspot connection.

1. Open the "Jlink" application on the car stereo.
2. On the car stereo, navigate to Settings > Wi-Fi and connect to your mobile phone's personal hotspot.
3. On your mobile phone, open the Jlink application. If it's your first time, you may need to download the Jlink client by scanning a QR code displayed on the car stereo screen.
4. Within the Jlink app on your phone, initiate screen mirroring or broadcast.
5. Confirm the connection on both devices. Your phone's screen will now be mirrored on the car stereo.

Refer to the "Product Multifunction Display Video" above for a visual guide on Wireless Jlink connection (starts at 1:25).

4. Bluetooth 5.0 for Hands-Free Calling and Music Streaming

The built-in Bluetooth 5.0 module enables stable hands-free calling and high-quality music streaming.

• Pairing: Go to the Bluetooth settings on the car stereo and your phone. Search for available devices and select the car stereo's Bluetooth name.
• Hands-Free Calling: Once paired, you can make and receive calls directly from the car stereo interface. Your phone's contacts can be synced.
• Music Streaming: Play audio from your phone through the car stereo speakers.

Image: Display showing the Bluetooth hands-free calling interface with a dial pad and contact list, alongside icons for various apps accessible via WiFi.

5. GPS Navigation and WiFi Connectivity

The car stereo features a GPS navigation system and WiFi for online services.

• GPS: Supports offline maps and real-time traffic updates when connected to the internet. Pre-installed maps for North America and Worldwide are available.
• WiFi: Connect to a WiFi hotspot (e.g., from your phone) to download apps, stream content, and receive online traffic data for navigation.

Image: The car stereo screen showing a GPS navigation map with route information, demonstrating its navigation capabilities.

6. FM/RDS Radio

Enjoy clear radio reception with the built-in FM/RDS tuner.

• FM: Tune into your favorite FM radio stations.
• RDS (Radio Data System): Displays station information, song titles, and traffic announcements where available.

Image: The car stereo displaying the FM radio interface with frequency tuning and RDS information, along with a separate view of the 32-band equalizer settings.

7. 32-Band Equalizer (EQ)

Customize your audio experience with the advanced 32-band equalizer.

• Adjust individual frequency bands to fine-tune the sound output to your preference.
• Select from various preset EQ modes (e.g., Pop, Rock, Jazz) or create your own custom settings.

8. Multiple UI Themes & Split Screen Functionality

Personalize your interface and multitask efficiently.

• Multiple UI Themes: Choose from various user interface themes to match your style or mood.
• Split Screen: Run two applications simultaneously, such as navigation and music, or FM radio and phone apps, for enhanced convenience.

Image: The car stereo screen demonstrating split-screen functionality, showing navigation and music apps side-by-side, along with a selection of different user interface themes.

9. AHD Backup Camera & Steering Wheel Control (SWC)

Enhance safety and convenience with the integrated backup camera and steering wheel controls.

• AHD Backup Camera: Automatically activates when reversing, providing clear visuals for safe parking.
• Steering Wheel Control: Program your vehicle's steering wheel buttons to control the stereo functions (e.g., volume, track skip, mode) without taking your hands off the wheel.

Image: The car stereo screen showing a clear view from the AHD backup camera with parking guidelines, and a separate image illustrating the steering wheel control learning interface.

Specifications

Image: A detailed view of the Incell touchscreen, emphasizing its high resolution, thin profile, and vibrant color display.

Troubleshooting

If you encounter issues with your Zomolither car stereo, refer to the following common solutions:

• No Power:
  • Check all power cable connections to ensure they are secure.
  • Verify the vehicle's fuse for the stereo is not blown.
  • Ensure the ignition is on.
• No Sound:
  • Check speaker wire connections.
  • Ensure the volume is not muted or set to zero.
  • Verify audio output settings in the stereo menu.
• Bluetooth/CarPlay/Android Auto Connection Issues:
  • Ensure Bluetooth and Wi-Fi are enabled on both the stereo and your phone.
  • Forget the device on both ends and attempt to re-pair.
  • Restart both the car stereo and your phone.
  • Ensure the "S-Play" or "Jlink" app is open on the stereo.
• GPS Signal Loss:
  • Ensure the GPS antenna is properly installed and has a clear view of the sky.
  • Check for any obstructions that might block the signal.
• Touchscreen Unresponsive:
  • Perform a soft reset of the unit (refer to the device's reset button, usually a small pinhole).
  • Ensure the screen is clean and free of debris.

If these steps do not resolve the issue, please contact customer support.

Care and Maintenance

To ensure the longevity and optimal performance of your car stereo, follow these maintenance guidelines:

• Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
• Temperature: The unit is designed to operate within a temperature range of -20°C to 70°C (-4°F to 158°F). Avoid exposing the unit to extreme temperatures outside this range for extended periods.
• Avoid Liquids: Prevent liquids from entering the unit, as this can cause damage to internal components.
• Software Updates: Periodically check for software updates from the manufacturer to ensure you have the latest features and bug fixes.

Warranty and Support

The Zomolither Android 15 Car Stereo comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects.

For technical support, warranty claims, or any questions not covered in this manual, please contact Zomolither customer service through your purchase platform or the official brand website.

Please have your product model number (4G+64G) and purchase details ready when contacting support.