4DRC 4D-V32-6

Download PDF
Contents

4DRC V32 Foam Remote Control Airplane User Manual

Model: 4D-V32-6

Introduction

Thank you for purchasing the 4DRC V32 Foam Remote Control Airplane. This manual provides essential information for the safe operation, setup, and maintenance of your RC airplane. Please read this manual thoroughly before operating the aircraft to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

4DRC V32 Foam Remote Control Airplane in flight with remote control

The 4DRC V32 Foam Remote Control Airplane, shown in flight with its remote control.

Safety Guidelines

Operating a remote control airplane requires attention to safety. Failure to follow these guidelines may result in injury or damage to the product or property.

  • Age Recommendation: This product is recommended for users aged 8 years and up. Adult supervision is advised for younger users.
  • Flight Environment: Fly in open, clear areas away from people, animals, buildings, power lines, and trees. Avoid flying in strong winds, rain, or other adverse weather conditions.
  • Proximity Warning: Keep the aircraft away from your face, hair, and body during operation. The propellers can cause injury. Do not fly near other individuals.
  • Battery Safety:
    • Use only the designated 5V 2A power supply and original USB charging cable provided. Incompatible chargers or cables can damage the battery and pose safety hazards.
    • After the aircraft battery is fully discharged, turn off the switch, disconnect the battery, and allow it to rest for 30 minutes before recharging to prevent damage.
    • Do not short-circuit, decompose, or throw batteries into fire. Avoid placing batteries in high temperature environments.
    • Do not mix different types of lithium batteries.
  • Pre-Flight Check: Always ensure the aircraft and remote control batteries are fully charged and securely installed before each flight. Inspect the aircraft for any damage.
  • Supervision: Always maintain visual contact with the aircraft during flight.

Package Contents

Verify that all items are present in the package:

  • 4DRC V32 RC Airplane
  • Remote Control Transmitter
  • 3 x 3.7V 350mAh Rechargeable Aircraft Batteries
  • USB Charging Cable
  • Spare Propellers (quantity may vary)
  • Screwdriver (for battery compartment)
4DRC V32 Foam RC Plane with 3 Batteries

The 4DRC V32 RC Plane shown with its three rechargeable batteries.

Setup

1. Aircraft Battery Installation and Charging

  1. Ensure the aircraft's power switch is in the OFF position.
  2. Locate the battery compartment on the aircraft.
  3. Gently push the battery rightwards to remove it from the compartment, as indicated in the diagram.
  4. Connect the aircraft battery to the provided USB charging cable.
  5. Connect the USB charging cable to a designated 5V 2A power supply (e.g., a USB wall adapter, not included).
  6. The charging indicator light on the USB cable will show the charging status (e.g., red for charging, off or green for fully charged).
  7. Charging typically takes approximately 30 minutes per battery. Each battery provides about 15 minutes of flight time.
  8. Once fully charged, disconnect the battery from the charger.
  9. Insert the charged battery back into the aircraft's battery compartment, ensuring it clicks securely into place.
Diagram showing how to insert and remove the lithium battery from the aircraft.

Diagram illustrating the correct method for inserting and removing the aircraft's lithium battery.

2. Remote Control Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Open the battery cover using a screwdriver if necessary.
  3. Insert 2 'C' batteries (included) into the compartment, ensuring correct polarity (+/-).
  4. Close the battery cover securely.
2.4GHz Remote Control for 4DRC V32 RC Airplane

The 2.4GHz remote control for the 4DRC V32 RC Airplane.

Operating Instructions

1. Power On and Pairing

  1. Place the aircraft on a flat, level surface.
  2. Turn on the aircraft's power switch. The LED lights on the aircraft will flash.
  3. Turn on the remote control. The remote will emit a beep, and its indicator light will flash.
  4. Push the left joystick (throttle) all the way up, then all the way down. The remote will beep again, and the aircraft's LED lights will become solid, indicating successful pairing.

2. Take-off and Landing

  • One-Key Takeoff: After pairing, press the One-Key Takeoff button (refer to remote diagram if available) to automatically launch the aircraft into the air and hover at a stable altitude.
  • Manual Takeoff: Gently push the left joystick (throttle) upwards to increase propeller speed and lift off.
  • One-Key Landing: Press the One-Key Landing button to automatically land the aircraft.
  • Manual Landing: Slowly pull the left joystick (throttle) downwards to decrease propeller speed and land the aircraft gently.
4DRC V32 RC Airplane demonstrating Headless Mode and One-Key Takeoff/Landing

The 4DRC V32 RC Airplane illustrating Headless Mode and One-Key Takeoff/Landing features.

3. Flight Modes and Features

  • Headless Mode: Activate Headless Mode to control the aircraft based on the orientation of the remote control, regardless of the aircraft's front direction. This simplifies control for beginners.
  • Altitude Hold: The aircraft can maintain a stable altitude automatically, allowing for easier control of direction and stunts.
  • 360° Flips and Aerial Stunts: Press the stunt button (refer to remote diagram) and move the right joystick in the desired direction to perform 360-degree flips and other aerobatic rolls.
  • Speed Modes: The aircraft features three adjustable speed options (e.g., 30%, 60%, 100%). Press the speed button on the remote to cycle through these modes, adapting to different skill levels and flight environments.
  • LED Lights: The aircraft is equipped with bright LED lights, enhancing visibility and making night flights more engaging.
4DRC V32 RC Airplane performing 3D Flips

The 4DRC V32 RC Airplane performing 3D flips.

Remote control showing 3 speed modes for the 4DRC V32 RC Airplane

Illustration of the three speed modes available for the aircraft.

4DRC V32 RC Airplane with colorful LED lights activated

The 4DRC V32 RC Airplane with its colorful LED lights illuminated.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the aircraft and remote control. Avoid using water or chemical cleaners, as they may damage electronic components.
  • Storage: When not in use, store the aircraft and remote control in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the remote control if storing for extended periods.
  • Propeller Care: Regularly inspect propellers for damage (bends, cracks). Replace any damaged propellers immediately using the provided spare parts to ensure optimal flight performance and safety.
  • Battery Storage: Store aircraft batteries at approximately 50% charge if not used for a long time to prolong their lifespan.

Troubleshooting

If you encounter issues with your 4DRC V32 RC Airplane, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Aircraft does not respond to remote.Not paired; low remote/aircraft battery; out of range.Re-pair the aircraft and remote. Charge batteries. Ensure within operating range.
Aircraft flies erratically or unstable.Damaged propellers; uneven surface for takeoff; strong wind.Check and replace damaged propellers. Take off from a flat surface. Fly in calm conditions.
Short flight time.Battery not fully charged; old battery.Ensure batteries are fully charged using the correct charger. Consider replacing old batteries.
Low Battery Alert (remote beeping).Aircraft battery is low.Land the aircraft immediately and recharge the battery.
Aircraft out of range alert (remote beeping).Aircraft has flown too far from the remote.Bring the aircraft closer to the remote control.
4DRC V32 RC Airplane with low battery and out of range alarm indicators

The 4DRC V32 RC Airplane indicating a low battery or out-of-range condition with remote control beeping.

Specifications

FeatureDetail
Model Number4D-V32-6
Product Dimensions10 x 2 x 7 inches
Item Weight10.8 ounces
Aircraft Battery3 x 3.7V 350mAh Rechargeable (included)
Remote Control Battery2 x C batteries (included)
Flight TimeApprox. 15 minutes per battery (45 minutes total with 3 batteries)
Charging TimeApprox. 30 minutes per battery
Recommended Age8 years and up
ManufacturerSHANTOU LION KINGDOM TECHNOLOGY CO.,LTD

Warranty Information

Specific warranty details for the 4DRC V32 Foam Remote Control Airplane are not provided in the product information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty inquiries.

Customer Support

For further assistance, technical support, or inquiries regarding replacement parts, please visit the official 4DRC website or contact their customer service department. Contact information may also be available on the product packaging.

Note: Some users have reported difficulty in obtaining direct contact information for 4DRC. If you purchased through a retailer, their customer service may be able to assist or provide manufacturer contact details.

© 2026 4DRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.