Beliani 678755

Beliani Yapp Round Dining Table User Manual

Model: 678755

1. Introduction

Thank you for choosing the Beliani Yapp Round Dining Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new table. Please read these instructions carefully before assembly and retain them for future reference.

Beliani Yapp Round Dining Table with glass top and wooden legs, shown in a dining room setting with two chairs.

Image 1.1: The Beliani Yapp Round Dining Table, featuring a clear glass top and a distinctive wooden leg base, suitable for dining areas.

2. Product Overview

The Beliani Yapp Round Dining Table is designed with a minimalist style, featuring a safety glass tabletop and a sturdy oak wood base. It is suitable for dining rooms, kitchens, or bar areas, accommodating up to 4 people.

Key Components:

  • Round Safety Glass Tabletop
  • Oak Wood Leg Base (pedestal style)
  • Assembly Hardware (not explicitly detailed, but implied for assembly)
Beliani Yapp Round Dining Table, showing the full structure of the glass top and the wooden cross-leg base.

Image 2.1: A detailed view of the Beliani Yapp Round Dining Table, highlighting its construction and materials.

3. Setup and Assembly

The Beliani Yapp Round Dining Table requires full assembly. It is recommended that two adults perform the assembly, which typically takes between 20 to 40 minutes.

Assembly Steps:

  1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches. Verify all components are present according to the included parts list (if provided).
  2. Assemble the Base: Follow the specific instructions provided in the packaging to connect the wooden leg components to form the pedestal base. Ensure all connections are secure but do not overtighten screws initially.
  3. Attach the Glass Top: Carefully place the safety glass tabletop onto the assembled wooden base. Ensure it is centered and properly aligned with the attachment points. Secure the glass top using the provided fasteners, taking care not to overtighten and crack the glass.
  4. Final Tightening: Once all parts are assembled and aligned, gently tighten all screws and fasteners. Do not force them.
  5. Placement: Position the table on a flat, stable surface.

Caution: Handle the glass tabletop with extreme care to avoid breakage or injury. Always lift, do not drag, the glass.

4. Operating Instructions

This dining table is designed for indoor use in dining rooms, kitchens, or similar areas. It is intended to support a maximum load of 100 kg.

Usage Recommendations:

  • Surface Protection: To maintain the longevity and aesthetic appeal of the tabletop, it is recommended to use placemats and coasters.
  • Spill Management: Promptly remove any wet stains or spills to prevent damage to the product, especially on the wooden components.
  • Weight Distribution: Distribute weight evenly across the tabletop. Avoid placing heavy objects on one side.

5. Maintenance

Regular cleaning and proper care will help preserve the appearance and durability of your Beliani Yapp Dining Table.

Safety Glass Maintenance:

  1. Clean the glass surface with a soft cloth and a mild glass cleaner or conditioner.
  2. Wipe the surface immediately after cleaning to prevent streaks or water spots.
  3. To avoid scratches, do not use abrasive cream cleaners or harsh scrubbing pads.
Close-up view of the glass tabletop and its connection to the wooden base, showing the smooth surface and attachment hardware.

Image 5.1: Detail of the glass tabletop and its connection point, illustrating the smooth finish.

Oak Wood Maintenance:

  1. Clean the wooden parts with a soft cloth and a mild cleaner, wiping in the direction of the wood grain.
  2. Immediately wipe dry after cleaning to prevent water accumulation, which can damage the wood.
  3. For oiled finishes (if applicable), re-oil the wood periodically to maintain its condition and appearance.
Close-up view of the oak wood leg, showing the natural grain and texture of the material.

Image 5.2: Detail of the oak wood leg, showcasing its natural grain.

6. Troubleshooting

This section addresses common issues you might encounter with your dining table.

Common Issues and Solutions:

  • Wobbling Table:
    Solution: Ensure the table is placed on a level surface. Check all assembly screws and fasteners to ensure they are securely tightened. Adjust any leveling feet if present.
  • Scratches on Glass Top:
    Solution: Minor scratches may be reduced with specialized glass scratch repair kits. For deeper scratches, replacement of the glass top may be necessary. Always use placemats and coasters to prevent scratches.
  • Stains on Wooden Legs:
    Solution: For fresh spills, wipe immediately with a damp cloth. For stubborn stains, use a wood-specific cleaner. Avoid harsh chemicals that can damage the wood finish.

7. Specifications

Detailed technical specifications for the Beliani Yapp Round Dining Table, Model 678755.

Product TypeDining Table
StyleMinimalist
Main ColorBrown (Light Shade)
Main MaterialSafety Glass
Secondary MaterialOak Wood
Tabletop MaterialGlass
Base MaterialWood
ShapeRound
Seating Capacity4 People
Width100 cm
Length100 cm
Height75 cm
Weight37 kg
Admissible Load100 kg
Assembly Time20 - 40 minutes
Diagram showing the dimensions of the Beliani Yapp Round Dining Table, including diameter, height, and leg measurements.

Image 7.1: Dimensional diagram of the dining table.

8. Warranty and Support

For any questions regarding assembly, missing parts, or product defects, please contact Beliani customer support. Information regarding spare parts availability is not provided.

Please refer to your purchase documentation for specific warranty terms and conditions.

Related Documents - 678755

Preview Bathtub Mounting Guide - Beliani TAHUA (C-3193)
Comprehensive mounting guide for the Beliani TAHUA (C-3193) bathtub, detailing installation steps, safety precautions, electrical connections, and maintenance.
Preview Beliani GRENADA (C-3098) Bathtub Mounting Guide
Comprehensive installation and mounting guide for the Beliani GRENADA (C-3098) bathtub, covering safety regulations, connections, troubleshooting, and maintenance.
Preview Bathtub Mounting Guide for Beliani PARADISO (NR1512)
Comprehensive mounting guide for the Beliani PARADISO bathtub (Model NR1512), detailing installation instructions, safety precautions, and technical specifications. Includes multilingual support.
Preview Beliani FORNOLI Pergola Assembly Instructions
Comprehensive assembly guide for the Beliani FORNOLI Pergola, detailing parts, tools, and step-by-step instructions for a successful setup. Includes a parts list and operational guidance.
Preview Beliani PERTH Credenza Assembly Instructions
Detailed assembly instructions for the Beliani PERTH credenza, including a parts list, hardware guide, and step-by-step assembly process. Learn how to build your new furniture.
Preview Beliani BAYAMO (C-3085) Bathtub Mounting Guide
Comprehensive installation and mounting guide for the Beliani BAYAMO (C-3085) bathtub. Includes assembly instructions, safety regulations, electrical and water connection details, troubleshooting, and maintenance tips.