GOOLOO GP4000 Jump Starter & A7 Jump Starter with Air Compressor User Manual

1. Introduction

Thank you for choosing the GOOLOO GP4000 Jump Starter and GOOLOO A7 Jump Starter with Air Compressor. This comprehensive kit provides reliable solutions for vehicle emergencies, including jump-starting dead batteries and inflating tires. The GP4000 is designed for powerful jump-starting and portable charging, while the A7 combines robust jump-starting capabilities with a professional air compressor. Please read this manual thoroughly before using the devices to ensure safe and optimal operation. Keep this manual for future reference.

2. Product Overview

GOOLOO GP4000 Jump Starter

The GP4000 is a high-performance portable jump starter with a peak current of 4000A. It is capable of starting all gasoline vehicles and diesel engines up to 10.0L. It also features USB fast charging and a Type-C interface for charging electronic devices, along with a multi-mode LED flashlight.

GOOLOO A7 Jump Starter with Air Compressor

The A7 is a versatile emergency tool offering a peak current of 6000A for jump-starting all gasoline vehicles and diesel engines up to 10.0L. Additionally, it integrates a 160PSI professional air pump for inflating tires and other inflatables, and serves as a multi-functional power bank.

3. Safety Information

Both GOOLOO GP4000 and A7 devices are equipped with SuperSafe safety technology, incorporating multiple protection mechanisms to ensure user safety and prevent damage to the equipment or vehicle. Adhere to the following safety guidelines:

• Reverse Connection Protection: Prevents damage if clamps are connected incorrectly.
• Overcurrent Protection: Safeguards against excessive current flow.
• Overvoltage Protection: Protects against voltage surges.
• Short Circuit Protection: Prevents damage from short circuits.
• Over-Charge Protection: Ensures safe charging of the device itself.
• Low-Temperature Protection: Optimizes performance and safety in cold conditions.
• High-Temperature Protection: Prevents overheating during operation.
• Spark-Proof Technology: Minimizes the risk of sparks during connection.
• Over-Load Protection: Protects against excessive power draw.
• Reverse-Charge Protection: Prevents current from flowing back into the jump starter from the vehicle battery.

General Safety Precautions:

• Do not disassemble or modify the device.
• Keep the device away from children.
• Use the device in a well-ventilated area.
• Avoid exposing the device to water or extreme temperatures.
• Ensure proper connection of clamps to avoid injury or damage.

Image: Overview of the 10 SuperSafe protections integrated into GOOLOO jump starters.

Image: Illustration of the quality metal clamps with copper material, designed for reliable and sturdy connections.

4. Setup

Initial Charging

Before first use, fully charge both the GOOLOO GP4000 and A7 devices. Use the provided charging cable and a suitable USB adapter. The charging indicator will show the battery level. It is recommended to fully charge the devices every 3-6 months to maintain battery health, even when not in use.

5. Operating Instructions

5.1. Using the Jump Starter (GP4000 & A7)

Follow these steps to jump-start a vehicle with a dead battery:

1. Ensure the jump starter is sufficiently charged.
2. Connect the red (+) clamp to the positive (+) terminal of the vehicle's dead battery.
3. Connect the black (-) clamp to the negative (-) terminal of the vehicle's dead battery.
4. Ensure all connections are secure and free from corrosion.
5. Turn on the jump starter (if it has a power button).
6. Start the vehicle's engine. If it doesn't start immediately, wait a few minutes and try again. Do not crank for more than 3 seconds per attempt.
7. Once the vehicle starts, disconnect the black (-) clamp first, then the red (+) clamp from the vehicle battery.
8. Remove the clamps from the jump starter.

Image: The GOOLOO GP4000 Jump Starter connected to a vehicle battery for jump-starting.

Image: The GOOLOO A7 Jump Starter connected to a vehicle battery, ready for operation.

5.2. Using the Air Compressor (A7 only)

The GOOLOO A7 features an integrated air compressor for tire inflation and other inflatables:

1. Connect the air hose to the tire valve stem. Ensure a tight seal.
2. Turn on the A7 device.
3. Use the controls on the A7 to set the desired pressure (PSI, BAR, KPA).
4. Press the start button to begin inflation. The compressor will automatically stop when the preset pressure is reached.
5. Monitor the pressure display during inflation.
6. Once inflation is complete, disconnect the air hose from the tire valve.

The A7 also supports deflation. Refer to the device's specific instructions for deflation mode.

Image: The GOOLOO A7 Jump Starter with Air Compressor in use, inflating a vehicle tire.

Image: The GOOLOO A7 Jump Starter with Air Compressor inflating an air mattress, showcasing its dual-mode inflation capability.

5.3. Using as a Portable Power Bank (GP4000 & A7)

Both devices can charge your electronic gadgets:

1. Connect your mobile phone, tablet, or other USB-powered device to the appropriate USB or Type-C output port on the jump starter.
2. The device will begin charging automatically.

Image: The GOOLOO GP4000 Jump Starter functioning as a power bank, charging multiple devices.

5.4. Using the LED Flashlight (GP4000 only)

The GP4000 includes a super-bright LED flashlight with multiple modes:

1. Press the flashlight button to turn on the light in normal mode.
2. Press again to cycle through strobe mode and SOS mode.
3. Press a fourth time to turn off the flashlight.

Image: The GOOLOO GP4000 Jump Starter's LED flashlight providing illumination in a dark engine bay.

6. Maintenance

• Charging: Recharge the devices every 3-6 months, even if not used, to prolong battery life.
• Storage: Store the devices in a cool, dry place, away from direct sunlight and extreme temperatures. The ideal storage temperature is between 0°C and 40°C (32°F and 104°F).
• Cleaning: Use a soft, dry cloth to clean the exterior of the devices. Do not use harsh chemicals or abrasive materials.
• Clamp Care: Keep the jump starter clamps clean and free of corrosion. After each use, wipe them down to remove any residue.

7. Troubleshooting

• Device Not Turning On: Ensure the device is fully charged. If the battery is completely depleted, it may take a few minutes of charging before it can power on.
• Vehicle Not Starting:
  • Check that the clamps are securely connected to the correct battery terminals (red to positive, black to negative).
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • The vehicle battery might be severely damaged. If multiple attempts fail, consult a professional mechanic.
• Air Compressor Not Inflating (A7):
  • Verify the air hose is securely attached to the tire valve.
  • Check that the desired pressure is set correctly on the device.
  • Ensure the A7 device has sufficient charge.
• Error Codes: If the device displays an error code, refer to the specific error code section in the full product manual (if available) or contact GOOLOO customer support for assistance.

8. Specifications

9. Warranty and Support

GOOLOO products typically come with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official GOOLOO website for detailed warranty information and terms. For technical support, troubleshooting assistance, or any questions regarding your GP4000 or A7 devices, please contact GOOLOO customer service through their official channels.