GEPRC DarkStar22 O4 Pro CineWhoop Quadcopter (ELRS 2.4G) Instruction Manual

Introduction

This manual provides essential information for the safe and efficient operation of your GEPRC DarkStar22 O4 Pro CineWhoop Quadcopter. Please read these instructions thoroughly before first use and retain for future reference. The DarkStar22 O4 Pro is designed for cinematic-grade 4K/120fps footage with ultra-low latency, featuring a 20A AIO flight controller for precision control and a reinforced frame for durability.

Product Features

• Cinematic-Grade Footage: Capture 4K/120fps video with ultra-low latency for real-time responsiveness and professional quality.
• Advanced Flight Control: Equipped with a 20A AIO flight controller with integrated stabilization algorithms for precision control in various conditions.
• Vibration Damping: Engineered to minimize vibrations and maintain camera stability during dynamic movements.
• Durable Design: Features a reinforced frame with a shockproof canopy and prop guards for enhanced durability in indoor and outdoor flights.
• User-Friendly Assembly: Simplified assembly with only 4 screws and intuitive LED controls for quick customization.

Package Contents

Verify all items are present in your package:

• 1 × DarkStar22 Drone
• 1 × Prop Guard
• 1 × Top Plate
• 1 × Camera Cover
• 1 × Battery Pad
• 2 × Propellers (pairs)
• 1 × 10*120mm Battery Strap
• 1 × L-shaped Hex Wrench 1.5mm
• 1 × Battery Anti-slip Pad
• 1 × Damping Ball Punch Tool
• 1 × Binding Pin
• 1 × USB Adapter Board
• 1 × 5P Terminal Cable
• Spare Screw Pack (2 × Damping Balls, 4 × M2*4 Round-head Screws, 4 × M2*7 Round-head Screws, 4 × M2*6 Countersunk Screws, 4 × M2*5 Countersunk Screws, 4 × M2*6 Round-head Screws, 4 × M2*7 Countersunk Self-Tapping Screw)

Setup

Binding Radio and Quadcopter

To establish communication between your radio transmitter and the DarkStar22 quadcopter, follow the binding procedure. Ensure both devices are powered off before starting.

Battery Installation

Proper battery installation is crucial for safe operation. Always ensure the battery is securely fastened.

O4 Air Unit Pro Camera and VTX Installation

The DarkStar22 features an integrated O4 Air Unit Pro. If re-assembly or maintenance is required, refer to the following videos for guidance on installing the O4 camera and VTX module. While these videos may feature different drone models, the O4 Air Unit installation steps are generally applicable.

Operating Instructions

Before each flight, ensure the battery is fully charged and securely installed. Perform a pre-flight check of all propellers, motors, and the frame for any damage. Always operate the quadcopter in an open area, away from people, animals, and obstacles. Familiarize yourself with the flight controller's functions and emergency procedures.

Basic Flight Controls

• Throttle: Controls altitude. Increase to ascend, decrease to descend.
• Yaw: Rotates the quadcopter left or right on its vertical axis.
• Pitch: Tilts the quadcopter forward or backward.
• Roll: Tilts the quadcopter left or right.

Start with slow, controlled movements to get accustomed to the controls. Practice hovering and gentle maneuvers before attempting more advanced flights.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your DarkStar22. After each flight, inspect the propellers for cracks or chips and replace them if damaged. Check the motor mounts and frame for any loose screws or structural integrity issues. Keep the camera lens clean and free from dust or debris. Store the quadcopter and batteries in a cool, dry place.

Troubleshooting

Specifications

Product Overview

Warranty and Support

GEPRC products are covered by a limited warranty against manufacturing defects. For detailed warranty information, technical support, or service inquiries, please visit the official GEPRC website or contact their customer service. Keep your proof of purchase for warranty claims.