Loniko Smart Toilet with Built-In Bidet and Tank

1. Safety Information

Please read this manual carefully before installation and use. Improper installation or operation may cause injury or product damage. Keep this manual for future reference.

• Ensure all electrical connections comply with local codes. A standard grounded outlet is required.
• Turn off the water supply before beginning installation or maintenance.
• Do not use abrasive cleaners or harsh chemicals on the toilet surface.
• This product is designed for indoor use only.

2. Package Contents

Verify that all components are present before beginning installation.

• Smart Toilet Unit
• Wireless Remote Control
• Mounting Bracket
• Mounting Screws
• Angle Valve
• Wax Ring
• Flange
• Positioning Template
• User Manual
• Spare Battery
• Foam Block (for Foam Shield)

3. Setup and Installation

This section provides step-by-step instructions for installing your Loniko Smart Toilet. For detailed visual guidance, please refer to the installation videos.

3.1 Pre-Installation Checks

• Ensure the sewage outlet is 11.81 inches away from the wall.
• The angle valve should be 10-16 inches above the ground.
• The wall socket should be 16-20 inches above the ground.
• A standard electrical outlet is required for operation.

3.2 Flange Installation

1. Place the positioning template over the sewage outlet and mark the drilling points.
2. Drill holes at the marked spots.
3. Insert expansion anchors into the drilled holes.
4. Align the PVC flange ring with the holes and secure it with screws.

3.3 Toilet Placement and Connections

1. Unpack the wax ring and firmly press it onto the toilet's sewage outlet.
2. Apply installation adhesive along the bottom edge of the toilet.
3. Carefully align the toilet with the flange and lower it into place.
4. Connect the water inlet hose to the angle valve and tighten.
5. Connect the power cord to a standard electrical outlet.

3.4 Foam Shield Setup

1. Remove the display cover on the toilet.
2. Place the concentrated foam block into the designated bottle for decomposition.
3. Connect the foam-dispensing device.

3.5 Remote Control Setup

• Install batteries into the remote control.
• Mount the remote control holder to the wall using the adhesive tape.

3.6 Installation Videos

4. Operating Instructions

Your Loniko Smart Toilet offers a range of intelligent features for enhanced comfort and hygiene. All functions can be controlled via the wireless remote or the side knob.

4.1 Automatic Lid and Seat

• The lid automatically opens when you approach the toilet and closes when you leave.
• The seat also opens automatically via a foot sensor.
• The soft-close mechanism ensures quiet operation.

Image: Automatic Lid Operation. The smart toilet features an automatic lid that opens and closes, and a foot sensor for hands-free seat operation.

4.2 Flushing Options

• Dual Flush Modes: A smaller flush (0.92gpf) for liquids and a full flush (1.28gpf) for solids.
• Auto-Flush: The toilet flushes automatically when you leave the seat.
• Foot Sensor Flush: Activate flushing by waving your foot over the sensor.
• Remote Control Flush: Use the remote to select flush modes.

Image: Multiple Flushing Methods. This image illustrates the various flushing options available, including dual flush for water efficiency and sensor-activated flushing.

4.3 Bidet and Cleaning Functions

• Multi-Clean Modes: Posterior, feminine, oscillating, and massage wash modes with adjustable spray position and water pressure.
• Warm Water & Dryer: Enjoy refreshing cleanse with filtered warm water and a gentle warm air dryer.
• Foam Shield: Automatically releases a fine layer of dense foam inside the bowl before each use to prevent splashing, reduce odor, and keep the bowl spotless.
• Self-Cleaning Nozzle: The bidet nozzle self-cleans before and after each use.

Image: Multi-Clean Bidet Modes. The bidet offers various cleaning modes, including posterior, feminine, oscillating, and massage, with adjustable water pressure for personalized comfort.

Image: Foam Shield Technology. This image highlights the foam shield feature, which creates a protective barrier to prevent splashing and reduce odors.

4.4 Temperature Settings

• Customize comfort with four temperature settings (Normal, 93°F, 96°F, 99°F) for the seat, water, and dryer.
• LCD screen displays real-time temperature settings.

Image: Adjustable Temperature Settings. This image shows the controls for instant warm water, heated seat, and warm air dryer, all with customizable temperature levels.

4.5 Night Light and Controls

• Soft LED night light guides your way in the dark.
• Ergonomic wireless remote for intuitive operation.
• Convenient side knob for quick adjustments.

Image: Human-Centered Design Features. This image highlights the wireless remote, convenient side knob, LED night light, digital display, and soft-close lid for user comfort and ease of use.

4.6 Operation Videos

5. Maintenance

• The bidet nozzle performs a self-cleaning rinse before and after each use.
• Regularly check and replace the foam block for the Foam Shield system as needed.
• Clean the exterior of the toilet with a soft, damp cloth and mild detergent. Avoid abrasive cleaners.

6. Troubleshooting

• If the toilet is not flushing, check the power connection and water supply.
• If bidet functions are not working, ensure the seat sensor is engaged (you must be seated for bidet functions to activate).
• For any persistent issues, refer to the detailed troubleshooting guide in the full user manual or contact customer support.

7. Specifications

8. Warranty and Support

Your Loniko Smart Toilet comes with a 12-month free replacement warranty. For any questions or support, our customer service is available 24/7.

Please refer to your purchase documentation for contact details.