onerbl AC-DC Adapter User Manual

Introduction

This manual provides essential information for the safe and effective use of your onerbl AC-DC Adapter. This adapter is designed to provide power to the Arcade1UP IGT-I-23090 32" Screen Infinity Game Table, enabling its operation and charging capabilities. Please read this manual thoroughly before using the product.

Safety Information

• Indoor Use Only: This adapter is intended for indoor use in dry locations. Do not expose to water, rain, or excessive moisture.
• Proper Ventilation: Ensure the adapter has adequate ventilation during use. Do not cover it or place it in an enclosed space that could restrict airflow.
• Correct Voltage: Only connect the adapter to a power outlet that provides the specified input voltage (AC 100-240V).
• Avoid Damage: Do not use the adapter if the cord or plug is damaged. Avoid bending, twisting, or pulling the cord excessively.
• Children and Pets: Keep the adapter out of reach of children and pets to prevent accidental damage or injury.
• Unplug When Not in Use: Disconnect the adapter from the power outlet when not in use for extended periods.

Package Contents

• 1 x onerbl AC-DC Adapter (Model: IGT-I-23090)

Setup

1. Connect the AC Power Cord: Insert the figure-8 connector of the AC power cord firmly into the corresponding port on the adapter unit.
2. Connect to Device: Plug the barrel connector of the adapter's output cable into the power input port of your Arcade1UP IGT-I-23090 Infinity Game Table.
3. Connect to Power Outlet: Insert the two-prong plug of the AC power cord into a standard wall electrical outlet (AC 100-240V).

This image demonstrates the adapter in a typical use scenario, plugged into a wall socket and connected to an electronic device, indicating proper setup.

Operating Instructions

Once the adapter is properly connected to both the power outlet and your Arcade1UP IGT-I-23090 Infinity Game Table, the game table should receive power. You can then power on your device according to its own operating instructions. The adapter will continuously supply power to the device and facilitate battery charging if applicable.

Maintenance

• Cleaning: Disconnect the adapter from the power source and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cables to prevent damage.

Troubleshooting

• Device Not Powering On:
  • Ensure all connections (wall outlet, adapter to device) are secure.
  • Verify the wall outlet is functional by testing it with another device.
  • Check the adapter and cables for any visible damage.
• Adapter Overheating:
  • Ensure the adapter has proper ventilation and is not covered.
  • Disconnect the adapter and allow it to cool down. If overheating persists, discontinue use.

Specifications

This image illustrates the physical dimensions of the AC-DC adapter, including the main unit, the AC power cord, and the DC output cable. The total cable length is approximately 127.8 inches.

This image shows the detachable AC power cord, which connects the adapter to the wall outlet. It features a standard two-prong plug on one end and a figure-8 connector on the other.

Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. This product has been tested to ensure great working condition.