HOMCOM FR83B-097V00BG0531

Download PDF
Contents

HOMCOM Swivel Armchair with Footrest Instruction Manual

Model: FR83B-097V00BG0531

Introduction

Thank you for choosing the HOMCOM Swivel Armchair with Footrest. This manual provides essential information for the safe assembly, operation, and maintenance of your new armchair. Please read these instructions thoroughly before use and retain them for future reference.

HOMCOM Swivel Armchair with Footrest in beige corduroy velvet

Image: The HOMCOM Swivel Armchair with Footrest, showcasing its design and the accompanying footrest.

Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

  • Ensure all components are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
  • Assemble the armchair on a soft, clean surface to prevent scratches.
  • Tighten all screws and bolts securely, but do not overtighten. Periodically check and retighten fasteners as needed.
  • Do not stand on the armchair or footrest.
  • Keep children and pets away from the assembly area.
  • Maximum weight capacity: Refer to specifications. Do not exceed.
  • Use the armchair only for its intended purpose.

Package Contents

Your HOMCOM Swivel Armchair with Footrest is typically delivered in two packages. Please verify that all components are present and undamaged before beginning assembly. Refer to the included parts list in your physical manual for detailed identification of all parts and hardware.

Note: No specific image for package contents or individual parts was available in the provided product media. Please consult your physical instruction manual for a detailed parts diagram.

Setup and Assembly

Follow these general steps for assembling your armchair. For detailed diagrams and specific hardware, please consult the assembly instructions provided in your product packaging.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to avoid damage.
  2. Assemble the Base: Attach the legs to the central swivel mechanism of both the armchair and the footrest. Ensure all bolts are finger-tightened initially.
  3. Attach Seat and Backrest: Secure the seat cushion to the armchair base. Then, attach the backrest to the seat and base assembly.
  4. Attach Armrests: Fasten the armrests to the main chair body.
  5. Final Tightening: Once all components are in place, fully tighten all screws and bolts using the provided tools. Do not overtighten.
  6. Check Stability: Gently rock the armchair and footrest to ensure all connections are secure and stable before use.
Dimensions of the HOMCOM Swivel Armchair and Footrest

Image: Diagram illustrating the dimensions of the armchair and footrest, useful for planning placement.

Operating Instructions

Your HOMCOM Swivel Armchair is designed for comfort and versatility.

360° Swivel Function

The armchair features a smooth 360-degree swivel base, allowing you to rotate freely without moving the entire chair. Simply apply gentle pressure with your feet to turn in any direction.

Armchair base showing 360 degree swivel arrow

Image: Close-up of the armchair's base, indicating the 360-degree swivel capability.

Reclining Backrest

The backrest can be adjusted to a comfortable reclining position up to 130 degrees. To recline, locate the adjustment lever (typically on the side of the seat) and gently lean back while operating the lever. Release the lever to lock the backrest in your desired position. To return to an upright position, lean forward slightly while operating the lever.

Armchair showing reclining motion

Image: The armchair demonstrating its reclining function, showing the backrest moving backward.

Using the Footrest

The accompanying footrest is designed to complement the armchair, providing additional comfort and support for your legs. Simply position it in front of the armchair as desired.

Maintenance

Proper care will extend the life and appearance of your armchair.

Cleaning the Upholstery (Corduroy Velvet)

  • Spot Cleaning: For spills or stains, immediately blot the affected area with a clean, dry cloth. Do not rub, as this can spread the stain.
  • For stubborn stains, use a mild upholstery cleaner or a solution of mild soap and water. Apply the solution to a clean cloth, then gently dab the stain. Test on an inconspicuous area first.
  • Allow the area to air dry completely. Avoid excessive moisture.
  • Regular Cleaning: Vacuum the corduroy velvet regularly using a soft brush attachment to remove dust and debris.
Close-up of corduroy velvet fabric texture

Image: Detailed view of the soft, durable corduroy velvet fabric, highlighting its unique texture.

Frame and Base Care

  • Wipe the metal frame and base with a soft, damp cloth. Avoid abrasive cleaners.
  • Periodically check all bolts and screws and tighten them if necessary to maintain stability.

Troubleshooting

If you encounter any issues with your armchair, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Armchair feels wobbly or unstable.Loose bolts or uneven floor.Check and tighten all assembly bolts. Ensure the armchair is on a flat, level surface.
Reclining mechanism is stiff or not working smoothly.Mechanism might need lubrication or is obstructed.Ensure no fabric or debris is obstructing the mechanism. Apply a silicone-based lubricant to moving parts if accessible (consult a professional if unsure).
Swivel function is not smooth.Debris in the swivel base or lack of lubrication.Inspect the swivel base for any obstructions. Clean if necessary. A small amount of silicone lubricant might help.

Specifications

  • Brand: HOMCOM
  • Model Number: FR83B-097V00BG0531
  • Color: Beige
  • Material: Metal, Polyester (Corduroy Velvet)
  • Overall Dimensions (Armchair): 83 cm (L) x 72 cm (W) x 107 cm (H)
  • Overall Dimensions (Footrest): 50 cm (L) x 45 cm (W) x 41 cm (H)
  • Seat Dimensions: 51 cm (W) x 40 cm (D)
  • Backrest Height: 67 cm
  • Seat Height from Floor: 46 cm
  • Recline Angle: Up to 130°
  • Swivel: 360°
  • Item Weight: 25 Kilograms
  • Special Feature: Adjustable backrest
  • Care Instructions: Spot cleaning
  • Country of Origin: China
Diagram showing layers of cushion material: fabric, high-density foam, stable board

Image: Cross-section diagram illustrating the comfortable cushion construction with fabric, high-density foam, and a stable board.

Additional Resources

No official product videos from the seller were found in the provided media. For further visual guidance, please refer to the diagrams in your physical instruction manual or visit the HOMCOM official website.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official HOMCOM website. Keep your proof of purchase for any warranty claims.

If you require assistance with assembly, parts, or troubleshooting beyond what is covered in this manual, please contact HOMCOM customer service directly.

© 2026 HOMCOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.