PUSOKEI Solar Security Camera (Model PUSOKEIk4oxtby8gg) Instruction Manual

1. Introduction

Thank you for choosing the PUSOKEI Solar Security Camera. This manual provides detailed instructions to help you set up, operate, and maintain your security camera system effectively. Please read this manual thoroughly before use and retain it for future reference.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x Security Camera
• 1 x Bracket
• 1 x Base Plate
• 7 x Expansion Tube
• 7 x Screw
• 1 x Reset Pin
• 1 x Instruction Manual (this document)
• 1 x Solar Panel

3. Product Overview

The PUSOKEI Solar Security Camera is designed for outdoor surveillance, featuring advanced capabilities for comprehensive home security.

3.1. Key Features

• Integrated Solar Panel: 8W solar panel for continuous power to the 8000mAh built-in battery.
• Triple Lens System: Three independent 4MP lenses providing a combined 12MP resolution with 8K ultra-clear image quality and simultaneous multi-angle viewing.
• Human Detection Alerts: Advanced motion sensing for immediate alerts and push notifications to your smartphone.
• Full Color Night Vision: Dual illumination (red and white LEDs) for clear, lifelike visuals in low light or darkness.
• Multi-Angle Flexible Coverage: Manually adjustable dual fixed lenses (355° horizontal, 180° vertical) and a remote-controlled lower lens (320° horizontal, 90° vertical).
• Weatherproof Design: IP66 rated for protection against rain, snow, and wind.
• Storage Options: Supports up to 128GB small memory card (excluded) and cloud storage.

3.2. Component Identification

4. Setup Instructions

Follow these steps to set up your PUSOKEI Solar Security Camera:

4.1. Initial Charging and App Installation

1. Charge the Camera: Although equipped with a solar panel, it is recommended to fully charge the camera's built-in 8000mAh battery via a USB power adapter (not included) before initial use.
2. Install the App: Download and install the V380pro application on your smartphone from your device's app store.
3. Create Account: Open the V380pro app and follow the on-screen instructions to create a new user account or log in if you already have one.

4.2. Mounting the Camera

The camera is designed for wall mounting. Choose a location that provides optimal surveillance coverage and receives sufficient sunlight for the solar panel.

1. Select Location: Identify a suitable wall location, ensuring it is within range of your Wi-Fi network.
2. Mark Drilling Points: Use the base plate as a template to mark the drilling points on the wall.
3. Drill Holes: Drill holes at the marked points and insert the expansion tubes.
4. Attach Base Plate and Bracket: Secure the base plate and bracket to the wall using the provided screws.
5. Mount Camera: Attach the security camera unit to the bracket.
6. Adjust Solar Panel: Position the solar panel to maximize exposure to direct sunlight throughout the day.

4.3. Connecting to Network

1. Power On: Ensure the camera is powered on.
2. Add Device in App: Open the V380pro app, tap the '+' icon to add a new device.
3. Follow In-App Instructions: Select your camera model and follow the guided steps to connect the camera to your WiFi network. This typically involves scanning a QR code on the camera or entering your WiFi credentials.
4. Configuration: Once connected, you can configure initial settings such as time zone, recording preferences, and alert settings.

5. Operating Instructions

5.1. Live View and Playback

Access the V380pro app to view live footage from your camera. You can also review recorded events stored on the memory card or cloud storage.

5.2. Human Detection Alerts

The camera features advanced human detection. When human movement is detected, the camera will trigger an alert and send a push notification to your smartphone.

5.3. Night Vision Modes

The camera offers multiple night vision modes for clear visibility in low-light conditions:

• Full Light Mode: Continuous warm light for full-color night vision.
• Infrared Night Mode: Infrared vision when warm light is off.
• Double Light Mode (Default): Camera uses infrared vision by default, automatically switching to full-color with warm light when motion is detected.

5.4. Multi-Angle and Triple Lens View

Utilize the camera's three lenses for comprehensive coverage. The app allows you to view feeds from all three lenses simultaneously.

• Fixed Lenses: Two fixed lenses provide a wide, static view.
• Pan & Tilt Lens: The lower lens can be remotely controlled via the app to pan (320° horizontal) and tilt (90° vertical) for dynamic coverage.

5.5. Two-Way Audio

The camera supports real-time two-way audio communication. Use the V380pro app to speak through the camera and listen to audio from the camera's location.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your security camera.

• Cleaning: Regularly clean the camera lenses and solar panel with a soft, damp cloth to remove dust and debris. Avoid abrasive cleaners.
• Solar Panel Efficiency: Ensure the solar panel remains free from obstructions (e.g., leaves, snow) to maximize charging efficiency.
• Weather Resistance: The camera is IP66 weatherproof. While designed to withstand rain and snow, extreme weather conditions may temporarily affect performance. Ensure all connections are secure.

7. Troubleshooting

If you encounter issues with your camera, refer to the following common solutions:

• Camera Not Connecting to Wi-Fi:
  • Ensure the camera is within range of your Wi-Fi router.
  • Verify that your Wi-Fi password is entered correctly in the app.
  • Restart your router and the camera.
  • Use the reset pin to reset the camera if necessary (refer to package contents for reset pin).
• Poor Image Quality:
  • Clean the camera lenses.
  • Ensure there are no obstructions in the camera's field of view.
  • Check your internet connection speed.
• No Human Detection Alerts:
  • Verify that human detection is enabled in the V380pro app settings.
  • Check the camera's motion detection sensitivity settings.
  • Ensure the app has permission to send notifications on your smartphone.
• Battery Not Charging:
  • Ensure the solar panel is clean and free from obstructions.
  • Verify the solar panel is positioned to receive adequate direct sunlight.
  • Check the connection between the solar panel and the camera.

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the contact details provided with your purchase documentation or visit the official PUSOKEI website. Keep your purchase receipt as proof of purchase.