Jocoevol C-1665 68'' Tall Display Cabinet User Manual

1. Introduction

Thank you for purchasing the Jocoevol C-1665 68'' Tall Display Cabinet. This cabinet is designed to showcase your collectibles with its elegant glass doors, customizable RGB lighting, and smart human body sensor. It also features ample storage with four tiers and two integrated drawers. Please read this manual thoroughly before assembly and use to ensure proper installation and operation.

2. Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all parts and fasteners are securely tightened before use.
• Do not overload shelves. Each shelf has a weight limit of 40 lbs.
• Use the included anti-tipping device to secure the cabinet to a wall, especially in homes with children or pets, to prevent serious injury.
• Keep electrical components (RGB lights, sensor) away from water or excessive moisture.
• Handle glass components with care to avoid breakage and injury.

3. Package Contents

Please verify that all components and fittings listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Components

• Top Panel (1 pc)
• Bottom Panel (1 pc)
• Side Panels (2 pcs)
• Middle Shelf (1 pc)
• Adjustable Shelves (2 pcs)
• Drawer Panels (various)
• Glass Doors (4 pcs)
• Back Panels (various)
• RGB LED Strips & Controller (pre-installed on some panels)
• Human Body Sensor (pre-installed)

Fittings

• Screws (various sizes: A, B, C, D, E, Q, S)
• Magnetic Catches (F)
• Glass Door Hinges (G)
• Anti-tipping Device (H, J)
• Drawer Slides (CL, CR, DL, DR)
• LED Strip Clips (M)
• Cable Management Clips (N)
• Shelf Pins (P)

4. Assembly Instructions

Assembly typically requires two people and takes approximately 40 minutes. Follow the numbered steps carefully. Refer to the assembly video for visual guidance.

Step-by-Step Assembly:

1. Prepare Side Panels: Attach screws (A) to the designated holes on side panels (2 and 3). (Refer to video: 0:10)
2. Assemble Middle Frame: Connect side panels (2 and 3) with crossbar (6) using screws (B). (Refer to video: 0:16)
3. Install Drawer Slides (Left): Attach drawer slide (CL) to panel (9) using screws (Q). (Refer to video: 0:42)
4. Install Drawer Slides (Right): Attach drawer slide (CR) to panel (9) using screws (Q). (Refer to video: 0:47)
5. Attach LED Strip to Panel 11: Secure the LED strip to panel (11) using clips (M) and screws. Attach magnetic catches (F) to panel (11) using screws (E). (Refer to video: 0:50)
6. Attach LED Strip to Panel 12: Secure the LED strip to panel (12) using clips (M) and screws. (Refer to video: 1:15)
7. Connect Panels 9, 10, 11: Assemble panels (9, 10, 11) and secure with screws (D). (Refer to video: 1:03)
8. Attach Panel 4 to Assembly: Connect panel (4) to the assembled structure using screws (B). (Refer to video: 1:10)
9. Attach Panel 5 to Assembly: Connect panel (5) to the assembled structure using screws (B). (Refer to video: 1:23)
10. Assemble Base Frame: Connect panels (14, 15, 16, 17) to form the base frame using screws (A) and secure with screws (B). (Refer to video: 1:39)
11. Attach Bottom Panel 13: Secure bottom panel (13) to the base frame using screws (A) and (C), then attach the assembled base frame to the main structure using screws (D) and (B). (Refer to video: 1:49)
12. Assemble Top Frame: Connect panels (18, 19, 20) to form the top frame using screws (A) and (B). (Refer to video: 2:06)
13. Attach Top Panel 1: Secure top panel (1) to the top frame using screws (C) and (D). Attach cable management clips (N) to panel (1). Then attach the assembled top frame to the main structure using screws (B). (Refer to video: 2:12)
14. Install Back Panels: Slide back panels (21, 22, 23, 32) into place and secure with screws (K). (Refer to video: 2:42)
15. Install Anti-Tipping Device: Attach the anti-tipping device (H, J) to the top rear of the cabinet. (Refer to video: 2:53)
16. Install Glass Doors: Carefully insert the glass doors (G) into the designated slots. Ensure they are properly aligned. (Refer to video: 3:07)
17. Assemble Drawers: Assemble drawer components (26, 27, 28, 29, 30, 31) using screws (A, B, D) and attach drawer slides (DL, DR). (Refer to video: 3:40)
18. Insert Drawers: Slide the assembled drawers into the cabinet. (Refer to video: 3:58)
19. Connect Electrical Plugs: Connect all LED light and sensor plugs at the back of the cabinet. (Refer to video: 4:02)

5. Operating Instructions

5.1 Pop-Up Glass Doors

The cabinet features a handle-free, push-to-open glass door design. Simply press gently on the glass door, and the magnetic latch will release, allowing the door to open smoothly. To close, push the door until the magnetic latch engages.

Image 1: Push-to-Open Glass Door Mechanism. This image illustrates the handle-free design, where a gentle press on the door activates the magnetic latch for opening.

5.2 RGB Lighting and App Control

Each layer of the cabinet is equipped with RGB LED strips. Control the lighting via a mobile app connected via Bluetooth.

• Download App: Scan the QR code provided in the product packaging or search for "Lotus Lamp X" in your mobile app store (Google Play or App Store).
• Connect via Bluetooth: Open the app and follow the instructions to connect to your cabinet's RGB lighting system via Bluetooth.
• Customize Lighting: Within the app, you can:
  • Choose from 16 million colors.
  • Adjust brightness levels (0% to 100%).
  • Select various fun lighting modes.
  • Utilize the built-in microphone feature to sync lights with ambient music.

Image 2: RGB Lighting App Control. This image displays the mobile application interface for controlling the cabinet's RGB lights, showing options for settings, DIY modes, color selection, and music synchronization.

Image 3: RGB Lighting Options. This image demonstrates the various lighting options available, including blue, warm yellow, and white light, highlighting the customizable ambiance.

5.3 Smart Human Body Sensor

The cabinet is equipped with an intelligent human body sensing system that automatically turns the lights on and off.

• Activation: Locate the function switch on the right control panel of the cabinet and turn it on.
• Operation: When a person approaches within 2–3 meters (approximately 6.5–10 feet), the lights will automatically turn on. The lights will automatically turn off approximately one minute after the person walks away.

Image 4: Smart Human Sensor in Action. This image shows a person approaching the cabinet, triggering the smart human sensor to illuminate the display, demonstrating its automatic functionality.

6. Maintenance

• Cleaning Glass: Use a soft, lint-free cloth and a glass cleaner to wipe glass surfaces. Avoid abrasive cleaners that may scratch the glass.
• Cleaning Wood/Metal: Wipe wood and metal surfaces with a soft, damp cloth. Avoid harsh chemicals.
• Dusting: Regularly dust the cabinet to prevent buildup, especially on shelves and inside the display area.
• Check Fasteners: Periodically check all screws and fasteners to ensure they remain tight. Tighten if necessary.
• Electrical Components: Ensure all electrical connections are secure. Do not attempt to repair electrical components yourself; contact qualified personnel.

7. Troubleshooting

7.1 RGB Lights Not Working

• Check Power: Ensure the cabinet is properly plugged into a working power outlet.
• Check Connections: Verify that all internal electrical plugs for the LED strips are securely connected at the back of the cabinet.
• App Connection: Confirm your mobile device is connected to the cabinet via Bluetooth in the "Lotus Lamp X" app.
• Brightness Settings: Check if the brightness in the app is set to a visible level.

7.2 Human Body Sensor Not Responding

• Sensor Switch: Ensure the human body sensor function switch on the right control panel is turned on.
• Obstructions: Make sure there are no obstructions blocking the sensor's field of detection (2-3 meters).
• Power Supply: Verify the cabinet has power, as the sensor requires electricity to operate.

7.3 Glass Doors Not Opening/Closing Smoothly

• Magnetic Latch: Check if the magnetic latches are properly aligned and free from debris.
• Hinges: Ensure the glass door hinges are securely installed and not damaged.

8. Specifications

Image 5: Product Dimensions. This diagram provides detailed measurements of the display cabinet, including its overall height, width, and depth, as well as internal shelf spacing.

9. Warranty and Support

Jocoevol is committed to providing top-quality service. For any questions regarding your display cabinet, including assembly, missing parts, or operational issues, please feel free to contact our customer support team. Refer to your purchase documentation or the manufacturer's website for specific warranty details and contact information.