Voluas Stainless Steel Wireless Cat Water Fountain

Introduction

Thank you for choosing the Voluas Stainless Steel Wireless Cat Water Fountain. This manual provides essential information for the proper setup, operation, and maintenance of your new pet water dispenser. Please read these instructions carefully before use to ensure optimal performance and the longevity of the product.

Product Overview

The Voluas Wireless Cat Water Fountain is designed to provide fresh, filtered water for your pets. It features a durable 304 stainless steel construction, a large 3.2L capacity, and a wireless, battery-operated design for flexible placement. The ultra-quiet pump and advanced 4-layer filtration system ensure a clean and appealing drinking experience for your cat.

Included Components:

• Water Dispenser (Stainless Steel Container)
• Water Pump Module with Spigot
• Filter Cartridge
• Pre-filter Sponge
• USB Power Cord
• Cleaning Brush
• Instruction Manual

Image: Assembled Voluas Stainless Steel Wireless Cat Water Fountain.

Image: All components included with the Voluas Cat Water Fountain.

Setup Instructions

1. Unpack Components: Carefully remove all items from the packaging.
2. Clean Components: Wash the stainless steel container, water tray, and spigot with clean water. Rinse the filter cartridge and pre-filter sponge. Do not immerse the pump module or charging port in water.
3. Assemble Filter: Insert the filter cartridge and pre-filter sponge into their designated slots in the water tray.
4. Install Pump Module: Place the water pump module into the designated area on the water tray, ensuring it is securely fitted. Attach the spigot to the pump outlet.
5. Charge/Connect Power: If using battery power, ensure the pump module is fully charged using the provided USB cable. If using continuous flow mode, connect the USB cable to the pump module and a wall adapter (not included).
6. Fill with Water: Fill the stainless steel container with fresh water, ensuring the water level is between the MIN and MAX indicators.
7. Place Tray: Carefully place the assembled water tray with the pump module onto the stainless steel container.
8. Power On: Long press the power button on the pump module to turn on the fountain.

Image: The 3.2L capacity of the Voluas Cat Water Fountain, showing the water level.

Operating Modes

The Voluas Cat Water Fountain offers three intelligent drinking modes to suit your pet's needs and conserve battery life:

• Sensor Mode: The fountain activates automatically for 30 seconds when your pet approaches within range. This mode is ideal for encouraging hydration while minimizing power consumption.
• Timer Mode: The fountain dispenses water for 15 seconds every 15 minutes. This provides regular access to fresh water throughout the day.
• Continuous Flow Mode: When plugged into an external power source, the fountain provides a continuous 24/7 flow of fresh water. This mode is only supported when connected to power.

To switch between Sensor Mode and Timer Mode, short press the function button on the pump module. A long press will turn the unit on/off.

Image: Visual representation of the three operating modes: Sensor, Timed, and Continuous Flow.

Maintenance and Cleaning

Regular cleaning and maintenance are crucial for your pet's health and the fountain's performance.

Daily Cleaning and Maintenance:

1. Disconnect power supply and turn off the product before cleaning. Keep the charging port dry.
2. Take out the filter cotton, filter tray, and rinse them with clean water.
3. Immerse the water container, water tray, filter mesh in water and wash them clean.
4. Do not immerse or wash the master control module; do not clean it in a dishwasher.
5. After cleaning the water container, wipe the charging port clean before connecting power.
6. It is recommended to change the drinking water every 3 days. Clean the product before changing water.

Cleaning and Maintenance of the Water Pump:

To ensure the water pump continues to operate normally and maintain its service life, the water pump must be cleaned regularly.

1. Remove the Pump Cover.
2. Remove the Impeller Cap.
3. Remove the Impeller.
4. Clean the inside of the water pump and the impeller with the provided brush.

Cautions:

• Be sure to shut down and disconnect the power supply for safety when the equipment is not in use.
• This product is for indoor use only.
• The power adapter and wire plug must not be flooded during cleaning.
• This product is not allowed to run without water.
• Please disconnect the power supply before maintaining and cleaning the machine.

Image: Diagram illustrating the 4-layer filtration system of the Voluas Cat Water Fountain.

Troubleshooting

If you encounter any issues with your Voluas Cat Water Fountain, please refer to the following common problems and solutions:

• No water flowing from the pump:
  • Check if the water level is above the minimum line.
  • Ensure the pump is properly installed and not obstructed.
  • Clean the pump and impeller thoroughly as per the maintenance instructions.
  • Verify the battery is charged or the power cord is securely connected if using continuous mode.
• Pump vibrates or water flow is abnormal:
  • This often indicates debris or hair obstructing the impeller. Disassemble and clean the pump as described in the maintenance section.
  • Ensure the water level is adequate.

For further assistance, please contact Voluas customer support.

Specifications

Warranty and Support

The Voluas Stainless Steel Wireless Cat Water Fountain comes with a 1 Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Voluas customer service through the retailer where you purchased the item or visit the official Voluas website for contact information.

Please retain your proof of purchase for warranty purposes.