Introduction
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Vente-unique MAZIRI 180 x 200 cm bed. Please read these instructions carefully before beginning assembly and retain them for future reference. Proper assembly and care will ensure the longevity and safe use of your bed.
Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the bed on a soft, clean surface to prevent scratches.
- Always use the correct tools as specified in the assembly guide.
- Do not overtighten screws, as this may damage the material.
- Keep small parts away from children during assembly.
- The maximum supported weight for this bed is 500 kg. Do not exceed this limit.
- When lifting the slatted base for storage access, ensure it is securely propped open before placing or retrieving items. Keep hands clear of moving parts.
Package Contents
Upon delivery, verify that all packages are received and inspect them for any damage. The MAZIRI bed is typically delivered in two packages:
- Package 1: Length 200 cm, Width 118 cm, Height 34 cm, Weight 34 kg
- Package 2: Length 210 cm, Width 33 cm, Height 24 cm, Weight 37 kg
Refer to the detailed assembly manual (PDF) for a complete list of parts and hardware. The official installation manual can be found here.
Setup and Assembly
Assembly of the Vente-unique MAZIRI bed is required. For detailed, step-by-step instructions, please refer to the official installation manual provided as a PDF document. A link to this document is available in the 'Package Contents' section above.
General Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent damage.
- Identify Parts: Compare the received parts with the parts list in the PDF manual to ensure everything is present.
- Assemble Frame: Follow the instructions to connect the headboard, footboard, and side rails. Ensure all connections are secure but do not fully tighten screws until the frame is aligned.
- Install Slatted Base Mechanism: Attach the lifting mechanism for the slatted base to the bed frame as directed.
- Place Slatted Base: Position the 36-slat base onto the frame and secure it.
- Final Tightening: Once the entire frame is assembled and aligned, carefully tighten all screws and bolts.
Image: The Vente-unique MAZIRI bed with its slatted base lifted, showcasing the integrated storage compartment. This mechanism allows easy access to the space beneath the mattress.
Image: A front view of the Vente-unique MAZIRI bed frame with the slatted base fully installed and ready for a mattress. The duck blue fabric upholstery is visible.
Operating Instructions
Using the Bed
The Vente-unique MAZIRI bed is designed for comfortable sleep for two persons. Place your mattress (not included) directly on the slatted base. Ensure the mattress fits the 180 x 200 cm dimensions for optimal support and appearance.
Accessing Storage
The MAZIRI bed features an integrated storage compartment beneath the slatted base. To access it:
- Remove the mattress from the bed.
- Grasp the handle or edge of the slatted base firmly.
- Lift the slatted base upwards. The gas lift mechanism will assist in raising and holding the base in an open position.
- To close, gently pull the slatted base downwards until it rests securely on the bed frame. Ensure no objects obstruct the closing mechanism.
Caution: Always ensure the slatted base is fully open and stable before reaching into the storage area. Keep children and pets away from the bed when operating the lifting mechanism.
Image: The Vente-unique MAZIRI bed fully assembled with a mattress, showcasing its duck blue bouclette upholstery and classic design.
Maintenance and Care
Fabric Care (Polyester Bouclette)
- Regular Cleaning: Vacuum the fabric regularly using a soft brush attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for polyester upholstery. Test on an inconspicuous area first. Do not rub vigorously, as this can damage the fabric texture.
- Avoid Harsh Chemicals: Do not use bleach, abrasive cleaners, or solvents, as these can discolor or damage the fabric.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading.
Frame Care (Plywood Structure)
- Wipe the frame with a soft, damp cloth. Dry immediately with a clean cloth.
- Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.
- Avoid placing hot or wet items directly on the frame without protection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose screws or bolts. Uneven floor. | Check and tighten all assembly hardware. Ensure the bed is on a level surface; use shims if necessary. |
| Squeaking noises. | Loose connections. Friction between parts. | Tighten all screws. Apply a small amount of silicone lubricant to contact points between metal and wood, or where slats meet the frame. |
| Difficulty lifting or closing the slatted base. | Mechanism obstruction. Gas lift malfunction. | Ensure no items are blocking the mechanism. If the gas lift appears faulty, contact customer support for assistance. Do not force the mechanism. |
| Fabric discoloration or damage. | Harsh cleaning agents. Prolonged sun exposure. | Refer to fabric care instructions. Avoid direct sunlight. For significant damage, consider professional upholstery repair. |
Specifications
| Feature | Detail |
|---|---|
| Model | MAZIRI |
| Brand | Vente-unique |
| Sleeping Dimensions | 180 x 200 cm |
| Overall Dimensions (L x W x H) | 196 cm x 218 cm x 97 cm |
| Bed Height (sleeping area) | 32 cm |
| Headboard Dimensions (L x D x H) | 196 cm x 16 cm x 97 cm |
| Color | Duck Blue |
| Material | 100% Polyester (Bouclette finish) |
| Structure | Plywood |
| Padding | Polyurethane foam (Density: 25 kg/m³) |
| Slatted Base Type | Frame with 36 slats |
| Mattress Included | No |
| Maximum Supported Load | 500 kg |
| Assembly Required | Yes |
| Item Weight | 71.8 kg |
| Country of Origin | France |
Warranty and Support
Warranty Information
This product is covered by standard legal guarantees and a 30-day return policy. For specific details regarding warranty coverage and terms, please refer to your purchase documentation or contact Vente-unique customer service.
Customer Support
For any questions, assistance with assembly, or troubleshooting, please contact Vente-unique's specialized customer support. Contact information can typically be found on your purchase invoice or on the Vente-unique website.
When contacting support, please have your product model (MAZIRI) and purchase details readily available.