Introduction
This manual provides essential information for the proper use and care of your OLEVS G2942 Men's Quartz Watch. This timepiece features a high-precision quartz movement, a multi-function chronograph, a moon phase dial, and is designed for daily wear with 30-meter water resistance. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
Setup
1. Setting the Time and Date
To set the time and date on your OLEVS G2942 watch, follow these steps:
- Pull out the crown: Gently pull the crown (the knob on the side of the watch) to position 2 for date adjustment, or position 3 for time adjustment.
- Adjust the date: In position 2, rotate the crown clockwise or counter-clockwise to set the correct date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
- Adjust the time: In position 3, rotate the crown to set the correct time. Ensure the AM/PM is correctly set by observing the 24-hour sub-dial or by advancing the time past 12 o'clock to see if the date changes.
- Push the crown back: Once the time and date are set, push the crown back firmly to position 1 to engage the movement and ensure water resistance.
2. Adjusting the Metal Wrist Band
The metal wrist band can be adjusted by removing or adding links to achieve a comfortable fit. A strap adjustment tool is typically included with your watch.
For visual guidance on adjusting the metal band, please refer to the video below:
Video: Instructions on how to remove and install links in the metal wrist band for proper sizing.
Steps for band adjustment:
- Identify the pins on the side of the links that need to be removed. Arrows on the inside of the band usually indicate the direction to push the pins.
- Place the band in the adjustment tool, aligning the pin with the tool's pusher.
- Carefully turn the screw on the tool to push the pin out.
- Remove the desired number of links.
- Reconnect the band by inserting the pin back into the links in the opposite direction, ensuring it is flush with the band.
If you encounter difficulty or the provided tool is insufficient, it is recommended to seek assistance from a professional jeweler to avoid damaging the watch band.

Image: Detailed dimensions of the OLEVS G2942 watch, including case diameter, thickness, and strap length/width.
Operating Instructions
1. Chronograph Function
Your OLEVS G2942 watch is equipped with a multi-function chronograph. The chronograph features include:
- 60-Minute Counter: Measures elapsed time up to 60 minutes.
- 60-Second Disc / Single Calendar: Functions as a 60-second counter for the chronograph and may also display the date.
- 24-Hour Counter: Displays time in a 24-hour format, useful for distinguishing AM/PM.
- Moon Phase Dial: Indicates the current phase of the moon.
Using the Chronograph:
- Start/Pause Timing: Press the upper button (pusher) to start the chronograph. Press it again to pause.
- Reset Timing: While the chronograph is paused, press the lower button (pusher) to reset all chronograph hands to zero.

Image: Function description of the watch dials and buttons.
2. Luminous Feature
The hands and hour markers of your OLEVS G2942 watch are equipped with a luminous coating. To activate the luminous effect, expose the watch dial to a strong light source (natural or artificial) for a few minutes. The intensity and duration of the glow will depend on the exposure time and light intensity.
3. Water Resistance
This watch is water-resistant to 30 meters (100 feet). This means it can withstand splashes, rain, and brief immersion in water. However, it is not suitable for swimming, diving, showering, or bathing, especially in hot water, as steam and temperature changes can compromise the seals.
For a visual demonstration of the watch's features, including water resistance, please watch the video below:
Video: Overview of the OLEVS G2942 watch features, including its design and water resistance.

Image: Features of the OLEVS G2942 watch, highlighting water resistance, luminous hands, durable mirror, and quartz movement.
Maintenance
1. Cleaning
Regularly clean your watch with a soft, dry cloth to remove dust, sweat, and fingerprints. For the metal band, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.
2. Water Exposure Precautions
While the watch is water-resistant, it is crucial to avoid exposing it to hot water, steam, or sudden temperature changes. Always ensure the crown is fully pushed in before any contact with water. If the watch comes into contact with saltwater, rinse it with fresh water and dry it thoroughly.
3. Storage
When not wearing your watch, store it in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing the watch near strong magnetic fields (e.g., speakers, refrigerators, mobile phones), as this can affect the accuracy of the quartz movement.
4. Battery Replacement
The OLEVS G2942 uses a quartz movement powered by a battery. When the watch stops or the second hand begins to jump erratically (indicating a low battery), it is time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the watch's seals and water resistance are maintained.
Troubleshooting
If you experience issues with your OLEVS G2942 watch, please refer to the following common problems and solutions:
- Watch not running:
Possible Cause: Crown is not fully pushed in, or battery is depleted.
Solution: Ensure the crown is pushed all the way to position 1. If the watch still does not run, the battery may need replacement. - Inaccurate time:
Possible Cause: Low battery, exposure to strong magnetic fields, or impact.
Solution: Check if the battery needs replacement. Keep the watch away from magnetic sources. If the issue persists after checking these, professional inspection may be required. - Condensation or water inside the watch:
Possible Cause: Water resistance compromised due to improper crown closure, damage, or exposure to extreme conditions.
Solution: Immediately take the watch to a professional watch repair service. Do not attempt to open the watch yourself, as this will void the warranty and likely cause further damage. - Difficulty adjusting the band:
Possible Cause: Pins are stiff, or the adjustment tool is not suitable.
Solution: Ensure you are pushing the pins in the correct direction (indicated by arrows on the band). If the provided tool breaks or is ineffective, seek professional assistance for band adjustment.
For any issues not covered here, please contact OLEVS customer support.
Specifications

Image: Key specifications of the OLEVS G2942 watch.
| Feature | Detail |
|---|---|
| Model Number | WD-S-G2942G-LL |
| Movement Type | Quartz |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Case Diameter | 44 mm |
| Case Thickness | 14 mm |
| Band Width | 24 mm |
| Band Length | 200 mm |
| Water Resistance | 30 Meters (100 Feet) |
| Crystal | High hardness coated glass mirror surface |
| Additional Features | Chronograph, Luminous, Moon Phase, Date |
| Item Weight | 98 Grams |
Warranty and Support
Warranty Information
Your OLEVS G2942 watch comes with a 1-year warranty period from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from accidents, improper use, unauthorized repairs, or normal wear and tear.
Return Policy
A 30-day free return period is offered from the date of purchase. Please refer to the retailer's return policy for specific conditions and procedures.
Customer Support
If you encounter any problems during the use of your OLEVS G2942 watch or have questions not addressed in this manual, please do not hesitate to contact OLEVS customer service. We are committed to providing professional assistance and support.
For further information or to contact support, please visit the official OLEVS store or contact your point of purchase.