Panda BA2550_01 Portable Twin Tub Washing Machine

Introduction

The Panda Portable Twin Tub Washing Machine (Model BA2550_01) is designed for compact living spaces such as apartments, dorms, RVs, or camping trips. This semi-automatic unit features a 14lbs washer and an 8lbs spin dryer, allowing for simultaneous washing and spin-drying. Its compact and lightweight design ensures easy storage and mobility.

Equipped with a powerful 1300 RPM motor, it provides efficient cleaning while being energy and water-efficient. A transparent lid allows monitoring of the laundry process. The durable 280W washing motor and 140W spin motor ensure quiet and reliable performance. A built-in drain pump facilitates water drainage to higher locations, offering greater flexibility. The adjustable inlet hose simplifies water filling.

Figure 1: Panda Portable Twin Tub Washing Machine in Bluish Grey.

Setup

1. Placement: Place the washing machine on a stable, level surface. Ensure adequate space for operation and drainage.
2. Water Inlet Connection: Connect the adjustable inlet hose to a water source. Ensure a secure connection to prevent leaks.
3. Drainage Setup: Position the drain hose to direct water into a suitable drainage area, such as a sink or bathtub. The built-in drain pump allows for drainage to higher locations.
4. Power Connection: Plug the power cord into a grounded electrical outlet.

Figure 2: Drain hose connection for proper water disposal.

Operating Instructions

1. Load Laundry: Load clothes into the washer tub, ensuring not to exceed the 14lbs capacity. For the spin dryer, do not exceed 8lbs.
2. Add Detergent: Add appropriate detergent to the wash tub.
3. Fill Water: Fill the wash tub with water using the inlet hose. Monitor the water level through the transparent lid.
4. Set Wash Cycle: Use the control knobs to set the desired wash time and select the wash selector (Normal/Gentle) based on fabric type.
5. Start Wash: Start the washing cycle. The machine will agitate the clothes.
6. Spin Dry: After the wash cycle, transfer clothes to the spin dryer tub for water removal. Set the spin cycle time using the control knob.
7. Complete: After spinning, clothes will be damp, significantly reducing drying time.

Figure 3: Control panel for setting wash and spin cycles.

Figure 4: Interior of the wash tub with pulsator.

Figure 5: Interior of the spin dryer tub.

Maintenance

• Lint Filter Cleaning: Regularly clean the lint filter located inside the wash tub to ensure efficient operation and prevent lint buildup.
• Exterior Cleaning: Wipe down the exterior of the machine with a soft, damp cloth after each use to maintain cleanliness.
• Drain Hose Check: Ensure the drain hose is clear of obstructions and kinks to prevent blockages and ensure proper water drainage.
• Storage: When not in use, store the machine in a dry, well-ventilated area to prolong its lifespan.

Figure 6: Lint filter for collecting debris during washing.

Troubleshooting

• Machine Not Starting: Check if the power cord is securely plugged into a functional electrical outlet.
• No Water Filling: Verify that the inlet hose is properly connected to the water source and the water supply is turned on.
• Water Not Draining: Inspect the drain hose for any kinks or blockages. Ensure the drain pump is operating correctly.
• Excessive Noise/Vibration: Confirm the machine is placed on a level surface and the laundry load inside the tub is balanced.

Specifications

Warranty and Support

The Panda Portable Twin Tub Washing Machine (Model BA2550_01) comes with a 1-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims, technical support, or any inquiries, please refer to the contact information provided in the included manual or visit the official Panda website for further assistance.