VolenGo H1100 Label Maker Instruction Manual

Introduction

The VolenGo H1100 Label Maker is a portable, handheld device designed for creating durable, laminated labels. Featuring a backlit LCD screen for visibility in various lighting conditions, a QWERTY keyboard for easy text entry, and multiple customization options, it is suitable for organizing cables, office supplies, industrial equipment, and more. This manual provides detailed instructions for setting up, operating, and maintaining your H1100 label maker.

The VolenGo H1100 Label Maker features a backlit LCD screen for clear viewing.

What's in the Box

Please check the package contents to ensure all items are present:

• 1 x H1100 Label Maker
• 4 x Laminated White Tapes (12mm x 8m)
• 1 x Replacement Cutter Holder
• 1 x USB Type-C Cable (1m)
• 1 x Instruction Manual
• 1 x Quick Start Guide
• 1 x Service Contact Card

The package includes the H1100 label maker, four tape cartridges, a cutter holder, USB-C cable, and documentation.

Setup

1. Powering the Device

The H1100 label maker can be powered in two ways:

• 6 AAA Alkaline Batteries: Insert six new AAA batteries (not included) into the battery compartment. Ensure correct polarity.
• USB Type-C Cable: Connect the provided USB Type-C cable to the label maker and a USB power adapter (not included) with an output voltage of 5V or below.

The H1100 can be powered by 6 AAA batteries or via the included USB-C cable.

2. Installing the Tape Cartridge

1. Open the tape compartment cover on the back of the label maker.
2. Insert a VolenGo 12mm tape cartridge, ensuring it clicks into place.
3. Close the tape compartment cover securely.

Operating Instructions

1. Basic Text Input

Use the QWERTY keyboard to type your desired text. The text will appear on the backlit LCD screen.

2. Customizing Labels

The H1100 offers various customization options:

• Fonts: Select from 16 available fonts using the 'Font' button.
• Frames: Choose from 100 frames to add decorative borders to your labels.
• Symbols: Access over 800 symbols to enhance your labels.
• Cable Modes: Utilize three dedicated cable modes for efficient wire labeling (Cable Wrap, Cable Flag, Faceplate).

Customize your labels with various fonts, frames, and symbols.

The H1100 supports three cable labeling modes for organized wiring projects.

3. Printing and Cutting

1. After entering and customizing your text, press the 'Print' button.
2. The label will print and emerge from the label exit slot.
3. Use the built-in cutter (located on the top right) to cleanly cut the label.

4. Multi-Edit Function

The Multi-Edit function allows you to create up to 20 different labels in a row without re-entering common elements. This is ideal for batch labeling tasks.

Use the Multi-Edit function to efficiently create multiple labels with varying content.

5. Margin Settings

Adjust the label margins to minimize tape waste. Options typically include Full, Half, and Narrow margins. Refer to the on-screen menu for specific settings.

Optimize tape usage by adjusting margin settings to Full, Half, or Narrow.

Maintenance

1. Cleaning the Print Head

To ensure optimal print quality, periodically clean the print head. Use a soft, dry cloth or a cotton swab lightly dampened with isopropyl alcohol. Avoid touching the print head directly with your fingers.

2. Replacing Tape Cartridges

When the tape runs out or you wish to change tape types, open the tape compartment cover, remove the old cartridge, and insert a new one as described in the Setup section.

3. Understanding Laminated Labels

VolenGo laminated tapes are designed for durability, resisting water, oil, abrasion, and extreme temperatures without fading. The 1-inch blank space at the start of labels is due to the laminate technology, as there is a distance between the print head and the exit port.

VolenGo laminated labels feature multiple layers for enhanced durability against various elements.

The initial 1-inch blank space on labels is a result of the laminate printing technology.

Troubleshooting

If you encounter issues with your VolenGo H1100 Label Maker, please refer to the following common solutions:

• No Power: Ensure batteries are correctly inserted and charged, or the USB-C cable is securely connected to a working power source.
• Poor Print Quality: Check if the tape cartridge is installed correctly. Clean the print head as described in the Maintenance section. Ensure you are using genuine VolenGo tapes.
• Tape Jam: Open the tape compartment, carefully remove any jammed tape, and reinsert the cartridge.
• Blank Space at Start of Label: This is normal for laminated tapes due to the printing mechanism. Adjust margin settings if you wish to minimize it.

For more detailed troubleshooting or persistent issues, please consult the full user manual included in your package or contact VolenGo customer support.

Specifications

Warranty and Support

This product comes with no explicit warranty description provided in the product details. For specific warranty information and customer support, please refer to the Service Contact Card included in your package or visit the official VolenGo website.