Ortis 7-Day Programmable In-Wall Timer Switch

1. Important Safety Information

WARNING: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker before installing or servicing this device. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• This device requires a Neutral Wire for operation. Verify the presence of a neutral wire (typically white) in your electrical box before installation.
• Do not exceed the maximum load rating of 1800W or 3/4 HP at 120V.
• Ensure all wire connections are secure and properly insulated.
• For indoor use only.

2. Package Contents

Verify that all components are present before beginning installation:

• Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077)
• Wire Nuts
• Mounting Screws
• User Manual

3. Specifications

4. Installation

Before You Begin: Turn off power at the circuit breaker for the switch location. Confirm power is off using a voltage tester.

Wiring Diagram

Image: Wiring diagram for the Ortis timer switch. The diagram illustrates connecting the BLACK wire to the LINE, the BLUE wire to the LOAD, and the WHITE wire to the NEUTRAL. Wire nuts are used for secure connections.

Step-by-Step Installation:

1. Turn Off Power: Locate the circuit breaker controlling the switch you are replacing and turn it OFF.
2. Remove Old Switch: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
3. Identify Wires: Identify the Line (incoming power), Load (to light/appliance), and Neutral wires in your electrical box. A neutral wire (usually white) is required for this timer switch. If you do not have a neutral wire, this switch is not compatible.
4. Connect Wires: Using the provided wire nuts, connect the wires from the Ortis timer switch to your household wiring as follows:
   • Connect the BLACK wire from the timer to the LINE (hot) wire from your electrical box.
   • Connect the BLUE wire from the timer to the LOAD wire (to the light/appliance).
   • Connect the WHITE wire from the timer to the NEUTRAL wire from your electrical box.
5. Mount Switch: Carefully fold the wires into the electrical box and secure the timer switch with the provided mounting screws.
6. Install Wall Plate: Attach your standard wall plate (not included) over the timer switch.
7. Restore Power: Turn the power back ON at the circuit breaker.

5. Controls Overview

Image: Detailed view of the Ortis timer switch interface. The blue backlit LCD screen displays time, day, and program status. Buttons for increasing/decreasing values, changing modes, and manual on/off control are clearly indicated. An LED illuminates when the load is active.

The Ortis timer switch features an intuitive three-button interface and a blue backlit LCD screen for easy operation and visibility in low light conditions.

• LCD Screen: Displays current time, day, operating mode, load state, and program information.
• Increase Key: Used to adjust time, program values, or navigate menus upwards.
• Decrease Key: Used to adjust time, program values, or navigate menus downwards.
• Mode Key: Cycles through different operating modes and settings menus.
• On/Off Key: Manually turns the connected load ON or OFF, or confirms selections.
• LED Indicator: Illuminates when the connected load (e.g., light, fan) is ON.

6. Initial Setup

After installation and restoring power, the device will require initial setup.

Setting Current Time and Date:

1. Press the Mode key until the time setting appears.
2. Use the Increase and Decrease keys to set the current hour, then press On/Off to confirm.
3. Repeat for minutes and day of the week.

Setting Latitude and Longitude (for Sunrise/Sunset):

This feature allows the timer to automatically adjust ON/OFF times based on local sunrise and sunset.

1. Press the Mode key until the latitude/longitude setting appears.
2. Use the Increase and Decrease keys to input your local latitude and longitude values. A chart of major cities may be provided in the full manual for reference, or you can look up your specific coordinates online.
3. Press On/Off to confirm. The display will show the calculated sunrise/sunset times for verification.

Daylight Saving Time (DST) Adjustment:

The timer can be configured to automatically adjust for Daylight Saving Time. Refer to the full manual for specific steps to enable or disable this feature.

7. Operating Modes

The Ortis timer switch offers three primary operating modes:

7.1 Automatic Mode (Sunrise/Sunset & Fixed Schedules)

Image: Illustration of the timer switch's automatic control, showing lights turning off at sunrise and on at sunset. The blue backlit LCD screen is visible, indicating clear readability in the dark.

In Automatic Mode, the timer operates based on programmed schedules, including sunrise/sunset times or custom ON/OFF times.

• Sunrise/Sunset Control: Once latitude and longitude are set, the timer automatically calculates and adjusts ON/OFF times daily based on local sunrise and sunset. An offset can be applied to turn lights on/off before or after these times.
• Fixed Schedules: Up to 7 custom ON/OFF programs can be set for specific times and days of the week.

7.2 Random Mode

Image: A visual representation of the timer's random mode, designed to enhance home security by simulating occupancy. Lights turn on and off at varied times, creating a 'lived-in' appearance.

Random Mode varies the ON/OFF times of your lights or appliances slightly to simulate occupancy, enhancing home security when you are away.

• To activate Random Mode, press the Mode key until "Random" is displayed.
• The timer will then randomly adjust your programmed ON/OFF times within a certain window.

7.3 Manual Mode

Manual Mode allows you to override any programmed schedules and turn the connected load ON or OFF instantly.

• Press the On/Off key to toggle the connected load between ON and OFF.
• The timer will remain in the manually set state until the next programmed event or until Manual Mode is exited.

8. Programming Schedules

The Ortis timer switch allows you to set up to 7 distinct ON/OFF programs. Programs can be set for specific days, weekdays, weekends, or all 7 days.

Steps to Program a Schedule:

1. Press the Mode key repeatedly until "P01" (Program 1) appears on the screen.
2. Use the Increase and Decrease keys to select the desired ON time (hour and minute), then press On/Off to confirm.
3. Next, select the days of the week for this ON event. You can choose individual days, groups (e.g., Mon-Fri, Sat-Sun), or all 7 days. Press On/Off to confirm.
4. Repeat the process to set the corresponding OFF time and days for Program 1.
5. To set additional programs (P02-P07), press the Mode key to advance to the next program number and repeat steps 2-4.
6. Once all programs are set, press the Mode key until the current time display returns, indicating the timer is ready to operate.

Note: All settings are saved permanently and will resume operation even after a power outage due to the internal battery backup.

9. Wide Compatibility

Image: A collage demonstrating the wide range of devices compatible with the Ortis timer switch. Examples include LED, CFL, incandescent, and halogen lights, as well as ceiling fans, fountain pumps, pool pumps, and sprinklers.

The Ortis timer switch is compatible with various lighting types and appliances:

• LED, CFL, Incandescent, Halogen, and Fluorescent Lights
• Ceiling Fans
• Bathroom Exhaust Fans
• Fountain Pumps
• Pool Pumps
• Sprinklers

10. Maintenance

The Ortis timer switch requires minimal maintenance.

• Cleaning: Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• No User-Serviceable Parts: Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic troubleshooting.

11. Troubleshooting

12. Warranty and Support

The Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077) comes with a 2-year manufacturer's warranty.

For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Ortis website.