LOKLNEYK Universal 2-Gang Wall Socket with USB-C and USB Charger Instruction Manual

Introduction

Thank you for choosing the LOKLNEYK Universal 2-Gang Wall Socket. This product is designed to provide convenient power access with integrated USB-C and standard USB charging ports, along with independent switches for enhanced control. This manual provides essential information for safe installation, operation, and maintenance of your new wall socket.

Important Safety Information

• Installation should only be performed by a qualified electrician or a person with sufficient electrical knowledge.
• Always turn off the main power supply at the circuit breaker before attempting any installation or maintenance.
• Ensure the product's voltage and current ratings (AC 110-250V, 13A) are compatible with your electrical system.
• Do not expose the product to moisture or extreme temperatures.
• Do not disassemble or modify the product.
• Keep children away from electrical outlets. The product features protective doors to prevent accidental insertion.

Product Features

• Oxidation-Resistant Copper Contacts: Ensures durability and reliable electrical connection.
• Flame Retardant Insulation Shell: Provides enhanced safety for home and office use.
• Flush Mount Design: Integrates seamlessly with your wall for a clean aesthetic.
• Anti-Leakage Structure: Designed for safety and clear wiring identification.
• Independent Switch Control: Each socket can be controlled individually, saving energy.
• Multiple Standard Interfaces: Compatible with various country plugs.
• Built-in Grounding Protection: Enhances electrical safety.
• Protective Doors: Each socket hole is equipped with a protective door to prevent accidental insertion.
• Integrated Copper Component: Ensures stable conductivity and smooth insertion/removal.

Image: Overview of the LOKLNEYK Universal 2-Gang Wall Socket, displaying various configurations including USB and USB-C options in white and black finishes.

Package Contents

• 1 x LOKLNEYK Universal 2-Gang Wall Socket (Dual USB-White)
• 1 x Instruction Manual
• Mounting Screws (quantity may vary)

Setup and Installation

WARNING: To prevent electric shock, always turn off power at the circuit breaker or fuse box before wiring. If you are unsure about electrical wiring, consult a qualified electrician.

1. Turn Off Power: Locate your circuit breaker panel and turn off the power to the circuit where you intend to install the wall socket. Verify power is off using a voltage tester.
2. Remove Old Outlet (if applicable): Carefully remove the cover plate and unscrew the existing outlet from the wall box. Disconnect the wires, noting their connections (Live, Neutral, Ground).
3. Prepare Wires: Strip approximately 1/2 inch (12-15mm) of insulation from the ends of the Live, Neutral, and Ground wires in the wall box.
4. Connect Wires:
   • Connect the Live (usually black or red) wire from the wall box to the terminal marked 'L' on the new socket.
   • Connect the Neutral (usually white or blue) wire from the wall box to the terminal marked 'N' on the new socket.
   • Connect the Ground (usually green or bare copper) wire from the wall box to the terminal marked 'E' or the ground symbol on the new socket.

   Ensure all connections are secure and no bare wire is exposed outside the terminals.

5. Mount the Socket: Gently push the wired socket into the wall box. Secure it with the provided mounting screws.
6. Attach Faceplate: Install the decorative faceplate over the socket.
7. Restore Power: Turn the power back on at the circuit breaker.
8. Test: Test the outlets and USB ports with a device to ensure proper functionality.

Image: Dimensional diagram of the wall socket, indicating a panel size of 146mm x 90mm.

Operating Instructions

The LOKLNEYK Universal 2-Gang Wall Socket is designed for straightforward operation.

• Using AC Outlets: Insert your appliance plug into one of the universal AC outlets. Each outlet has an independent switch. Press the switch to the 'ON' position (usually indicated by a light or specific orientation) to supply power to the connected device. Press it to 'OFF' to cut power.
• Using USB/USB-C Ports: Connect your USB or USB-C compatible charging cable to the respective port. The USB ports are typically always active when the main power to the socket is on, providing power for charging mobile phones, tablets, and other USB-powered devices.
• Protective Doors: The integrated protective doors require a slight force to insert a plug, ensuring that foreign objects cannot easily enter the socket openings.

Image: Detailed view of the socket's face, showing the two universal AC outlets, USB-A and USB-C ports, and their corresponding power switches.

Maintenance

• Cleaning: Ensure power is off before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
• Inspection: Periodically inspect the socket for any signs of damage, loose connections, or discoloration. If any issues are found, turn off power and consult a qualified electrician.
• Avoid Overloading: Do not exceed the maximum current rating of 13A for the socket.

Troubleshooting

Specifications

Image: Assortment of LOKLNEYK wall sockets in different colors (white, grey, black), showcasing the product's aesthetic versatility.

Warranty and Support

LOKLNEYK products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official LOKLNEYK website. Please retain your proof of purchase for warranty claims.

For any issues not covered in the troubleshooting section, please contact customer support before attempting repairs yourself.