PATPET DC-940 Dog Training Collar User Manual

1. Introduction

The PATPET DC-940 Dog Training Collar is a professional-grade system designed for effective and humane dog training. It is ideal for correcting unwanted behaviors, teaching new commands, and enhancing communication with your dog. This system features a remote control with a 1.2-mile range, offering 101 adjustable training levels across three modes: beep, vibration, and static stimulation. The receiver collar is IPX7 waterproof, making it suitable for various outdoor conditions. It is designed for dogs weighing between 15 to 150 lbs.

2. Package Contents

• Remote Transmitter
• Receiver Collar(s) (Quantity may vary based on purchase)
• Adjustable TPU Collar Strap
• Charging Cable and Adapter
• Test Light Tool
• Short and Long Contact Points (Metal and Rubber options)
• Training Whistle
• Training Clicker
• Training Treat Bag
• User Manual

Image: Overview of the PATPET DC-940 Dog Training Collar components, including the remote, receiver collar, charging accessories, and various training tools.

3. Setup

3.1 Charging the Devices

Before first use, fully charge both the remote transmitter and the receiver collar. Connect the charging cable to the devices and the adapter to a power source. A full charge typically takes approximately 2 hours. The receiver collar offers a standby time of over 12 days on a single charge.

Image: The PATPET DC-940 remote control and receiver collar shown connected to their charging cable and adapter.

3.2 Attaching Contact Points

Select the appropriate length of contact points (short or long) based on your dog's coat thickness. For dogs with thicker coats, longer contact points may be necessary to ensure proper contact with the skin. Screw the chosen contact points securely into the receiver collar.

3.3 Fitting the Collar

Place the receiver collar around your dog's neck, ensuring the contact points are positioned underneath the neck, making direct contact with the skin. The collar should be snug enough that two fingers can barely fit between the strap and your dog's neck. A proper fit is crucial for the collar to function effectively and safely. Reposition the collar every 2 hours and avoid leaving it on for more than 8 hours a day to prevent skin irritation.

Image: Two German Shepherds wearing the PATPET DC-940 collars, demonstrating the appropriate size and fit for dogs weighing between 15 and 150 pounds.

3.4 Pairing Remote and Receiver

Turn on both the remote transmitter and the receiver collar. The devices should automatically pair. If pairing is not successful, refer to the detailed pairing instructions in the included user manual. The remote supports two channels for controlling up to two dogs simultaneously.

4. Operating Instructions

4.1 Remote Control Overview

The remote control features dedicated buttons for each training mode (Beep, Vibration, Static Stimulation) and a rotary dial to adjust the intensity levels. An LCD screen displays the current intensity level and battery status.

Image: The PATPET DC-940 remote control, illustrating its three training modes: Beep, Vibration with 1-8 adjustable levels, and Static Stimulation with 1-99 adjustable levels.

4.2 Training Modes and Levels

• Beep Mode: Delivers an audible tone to your dog. This is often used as an initial warning or for positive reinforcement.
• Vibration Mode: Provides a gentle vibration. This mode has 8 adjustable intensity levels.
• Static Stimulation Mode: Delivers a static pulse. This mode has 99 adjustable intensity levels. Always start at the lowest level and gradually increase until your dog responds.

The remote allows for precise adjustment of intensity levels for both vibration and static stimulation, ensuring you can tailor the correction to your dog's temperament and the training situation.

4.3 Remote Control Range

The PATPET DC-940 offers an impressive control range of up to 1.2 miles, providing ample freedom for training in open outdoor environments, including hunting or hiking with close-working dogs.

Image: A hand holding the PATPET DC-940 remote control, with two dogs running freely in a natural outdoor setting, highlighting the extensive 1.2-mile control range.

5. Maintenance

5.1 Waterproof Design

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows for training in wet conditions or if your dog enjoys swimming, without concern for device malfunction.

Image: Two dogs enthusiastically running through shallow water, demonstrating the IPX7 waterproof capability of the PATPET DC-940 receiver collar.

5.2 Skin Health and Hygiene

Regularly check your dog's neck for any signs of irritation, redness, or sores, especially around the contact points. Clean the contact points and the area of your dog's neck that comes into contact with the collar daily to maintain hygiene and prevent skin issues. If irritation occurs, discontinue use and consult a veterinarian.

6. Troubleshooting

If you encounter any issues with your PATPET DC-940 Dog Training Collar, please refer to the comprehensive troubleshooting guide in the included user manual. Common issues may include:

• Collar not responding to remote commands.
• Shortened range.
• Battery not holding a charge.
• Skin irritation on your dog's neck.

Ensure both devices are fully charged, properly paired, and the collar is correctly fitted on your dog's neck. Check for any physical damage to the devices or charging cables.

7. Specifications

8. Warranty and Support

The PATPET DC-940 Dog Training Collar comes with a 2-year warranty. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official PATPET website.