WZYBUTA 280W 10R LED Beam Stage Light (Model ZQ02229) Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of the WZYBUTA 280W 10R LED Beam Stage Light, Model ZQ02229. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or injury to personnel.

The WZYBUTA 280W 10R LED Beam Stage Light is a professional lighting fixture designed for various stage applications, including concerts, bars, theaters, and events. It features a powerful 280W LED light source, multiple color and gobo effects, and versatile control options.

2. Safety Information

• Always connect the unit to a grounded power outlet.
• Ensure proper ventilation around the fixture to prevent overheating.
• Do not look directly into the light source when the fixture is operating.
• Disconnect power before performing any maintenance or cleaning.
• Installation and service should only be performed by qualified personnel.
• Avoid direct exposure to rain or moisture.

3. Product Overview and Features

The WZYBUTA 280W 10R LED Beam Stage Light offers a range of features for dynamic lighting effects:

• High-Precision Optical System: Equipped with a high-precision cemented optical lens for enhanced brightness and beam thickness, minimizing light loss and ensuring clear patterns.
• Extensive Lighting Effects: Features 15 colors, 17 gobos, 2 prism discs (8-facet and 64-facet), rainbow effect, atomization, and strobe functions.
• Versatile Movement: X-axis (Pan) rotation of 540° and Y-axis (Tilt) rotation of 280° with 160-bit precision scanning and electronic error correction for accurate positioning.
• Multiple Control Modes: Supports DMX512, master-slave, self-propelled, and sound-activated control.
• Electronic Zoom: Adjustable beam angle from 2° to 25°.

3.1 Key Components and Dimensions

Figure 1: Product Dimensions and Key Wheels

The fixture measures approximately 11.9"L x 12.8"W x 20"H and weighs 15kg. It includes dedicated wheels for gobos, colors, and atomization/rainbow effects.

3.2 Control Panel and Connections

Figure 2: Control Panel and Connection Ports

The base of the unit features an LCD display for menu navigation, DMX In/Out ports for signal connection, a power switch, a fuse holder, and a power input connector.

3.3 Internal Components and Optics

Figure 3: Internal Structure and Key Functions

The fixture incorporates a high-precision optical lens, a cooling fan for heat dissipation, a robust rotary arm for lens movement, and an advanced control system for reliable operation.

3.4 Product Demonstration

Video 1: Flat display of a single WZYBUTA 280W 10R LED Beam Stage Light, demonstrating its physical appearance and basic functionality.

4. Setup

4.1 Unpacking

Carefully unpack the fixture and inspect it for any damage during transit. Retain the packaging for future transport or storage.

Figure 4: Packing List

The package typically includes: Beam light unit (x1), Power cord (x1), DMX cable (x1), Brackets (x2), and a User Manual (x1).

4.2 Mounting

The fixture is designed for rack mounting. Use the provided brackets to securely attach the light to a truss or other suitable support structure. Ensure all clamps and fasteners are tightened properly to prevent accidental detachment.

4.3 Electrical Connection

Connect the power cord to the power input on the fixture and then to a compatible grounded power outlet (AC 100-240V, 50/60Hz). Verify the voltage matches the fixture's requirements.

4.4 DMX Connection (Optional)

For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Terminate the last fixture in the chain with a DMX terminator.

5. Operating Instructions

The WZYBUTA 280W 10R LED Beam Stage Light can be operated in several modes:

5.1 Control Panel Navigation

Use the buttons on the LCD display to navigate through the menu options. Typically, there are buttons for UP, DOWN, LEFT, RIGHT, and OK/ENTER to select settings.

5.2 DMX512 Control

In DMX mode, the fixture uses 16 channels for control. Set the DMX address for each fixture using the control panel. Refer to the DMX channel chart (not provided in this general manual, typically found in a dedicated DMX manual) for specific channel functions, including Pan, Tilt, Color, Gobo, Prism, Strobe, and Dimmer.

5.3 Master-Slave Mode

Connect multiple fixtures via DMX cables. Set one fixture as the 'Master' and the others as 'Slave' units. The slave units will mirror the master's movements and effects, allowing for synchronized operation without a DMX controller.

5.4 Sound-Activated Mode

In sound-activated mode, the fixture's effects respond to ambient sound. Use the control panel to select this mode. The sensitivity may be adjustable.

5.5 Auto/Self-Propelled Mode

The fixture has built-in programs that can run automatically. Select an auto program via the control panel. Speed and other parameters may be adjustable.

5.6 Effect Demonstrations

Figure 5: Examples of Gobo, Color, and Prism Effects

The fixture can produce a wide array of visual effects, including distinct gobo patterns, vibrant color changes, and dynamic prism effects, as shown in Figure 5.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your stage light.

• Cleaning: Periodically clean the lenses and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspection: Regularly check all cables, connections, and mounting hardware for signs of wear or damage. Replace any damaged components immediately.
• Cooling System: Ensure the cooling fan and vents are free from dust and debris to maintain efficient heat dissipation.

7. Troubleshooting

If you encounter issues with your WZYBUTA 280W 10R LED Beam Stage Light, refer to the following common troubleshooting steps:

• No Power: Check the power cable connection, the power outlet, and the fuse. Replace the fuse if blown (ensure correct fuse type).
• No Light Output: Verify the fixture is receiving power and is not in blackout mode. Check DMX signal if applicable.
• No Movement/Incorrect Movement: Ensure DMX signal is correct and the fixture's DMX address is properly set. Check for any physical obstructions. Perform a reset via the control panel if available.
• Intermittent Operation: Inspect all power and DMX connections for looseness or damage. Ensure stable power supply.
• Overheating: Ensure adequate ventilation around the fixture. Clean any dust from the cooling vents and fan.

If problems persist after attempting these steps, contact customer support for assistance.

8. Specifications

9. What's in the Box

• Beam light unit
• Power cord
• DMX cable
• Mounting brackets (2)
• User Manual

10. Warranty and Support

For warranty information and technical support, please refer to the contact details provided with your purchase documentation or visit the official WZYBUTA website. Keep your purchase receipt as proof of purchase for any warranty claims.