Beliani Caraquet Bedside Table Instruction Manual

Introduction

This instruction manual provides detailed guidance for the assembly, safe use, and maintenance of your Beliani Caraquet Bedside Table. Please read these instructions carefully before beginning assembly and retain them for future reference. Proper assembly and care will ensure the longevity and stability of your furniture.

The Beliani Caraquet Bedside Table features a geometric pattern, a drawer, and an open shelf, designed for bedroom storage and convenience.

Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not overload the drawer or shelf. Refer to the "Specifications" section for weight limits.
• Keep small parts and packaging materials away from children during assembly.
• Do not stand or climb on the bedside table.
• If any parts are missing or damaged, do not proceed with assembly. Contact Beliani customer support.

Package Contents

Before starting assembly, verify that all components are present and undamaged. The package should include:

• MDF panels for the main structure (top, sides, bottom, shelf, drawer components)
• Metal legs
• Drawer slides and hardware
• Assembly hardware (screws, dowels, cam locks, etc.)
• Assembly instructions (this document or a separate sheet)

Note: A Phillips head screwdriver and a hammer (not included) may be required for assembly.

Setup and Assembly

Assembly is required for this product and typically takes 20-40 minutes. Follow the steps below for proper construction.

1. Prepare the Workspace: Clear a spacious area and lay down a blanket or cardboard to protect the furniture pieces and your floor from scratches.
2. Identify Components: Unpack all parts and identify them using the provided parts list (if a separate list is included). Group similar hardware together.
3. Assemble the Main Frame: Attach the side panels to the bottom panel and then the top panel, using the designated screws and dowels. Ensure all connections are snug.
4. Install the Shelf: Insert the fixed shelf into its designated slots or attach it with the provided hardware.
5. Assemble the Drawer: Construct the drawer box by attaching the sides, front (with geometric pattern), and back to the bottom panel. Install the drawer slides onto the drawer box.
6. Attach Drawer Slides to Cabinet: Secure the corresponding drawer slides to the interior of the bedside table cabinet.
7. Insert the Drawer: Carefully slide the assembled drawer into the cabinet, ensuring the slides engage correctly.
8. Attach the Legs: Securely fasten the metal legs to the underside of the bedside table using the provided screws.
9. Final Check: Once assembled, gently move the table to its desired location. Check for stability and ensure all connections are tight.

Figure 1: Dimensional diagram of the Caraquet Bedside Table, illustrating overall and internal measurements.

Figure 2: Detail of the drawer slides and interior construction.

Operating Instructions

The Beliani Caraquet Bedside Table is designed for static use as a storage and display unit in a bedroom or similar living space.

• Drawer Use: The single drawer provides enclosed storage. Open and close the drawer gently to prevent wear on the slides.
• Shelf Use: The open shelf is suitable for books, decorative items, or electronic devices.
• Weight Limits:
  • Maximum load for the top surface: 25 kg
  • Maximum load for the shelf: 5 kg
  • Maximum load for the drawer: 2 kg
• Surface Protection: To maintain the longevity and appearance of the top surface, use coasters and placemats. Promptly wipe away any spills or moisture to prevent damage.

Figure 3: The Caraquet Bedside Table in use, showcasing its storage capabilities.

Maintenance and Care

Regular cleaning and proper care will help preserve the appearance and structural integrity of your bedside table.

MDF (Engineered Wood) Surfaces:

• Clean with a soft, damp cloth and a mild detergent.
• Wipe dry immediately after cleaning to prevent moisture damage.
• Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.

Metal Legs:

• Clean with a soft, damp cloth and a mild detergent. Wipe dry thoroughly.
• To prevent scratches, do not use abrasive cleaners.
• For copper or chrome-plated elements (if applicable), use a specialized polishing product.

General Care:

• Avoid direct sunlight and extreme temperature changes to prevent warping or fading.
• Do not place hot items directly on the surface without protection.
• Periodically check and tighten all assembly hardware to ensure stability.

Troubleshooting

If you encounter any issues with your Beliani Caraquet Bedside Table, refer to the following common solutions:

• Instability/Wobbling: Ensure all screws and fasteners are fully tightened. Check that the table is on a level surface.
• Drawer Not Sliding Smoothly: Verify that the drawer slides are correctly installed and aligned. Ensure no objects are obstructing the drawer's path. Apply a silicone-based lubricant to the slides if necessary.
• Scratches/Minor Damage: For minor scratches on MDF, touch-up pens or furniture markers matching the finish color can be used.

For persistent issues or concerns not addressed here, please contact Beliani customer support.

Specifications

Figure 4: Front view of the Caraquet Bedside Table.

Warranty and Support

For warranty information, please refer to the terms and conditions provided by Beliani at the time of purchase or visit the official Beliani website. Beliani typically offers a manufacturer's warranty against defects in materials and workmanship.

If you require assistance with assembly, have questions about product care, or need to report a missing or damaged part, please contact Beliani customer support directly.

You can find more information and contact details on the official Beliani store page: Beliani Official Store