BLOKEES Transformers Defender Version 04 - Tyrants Fury Model 71404 Instruction Manual

1. Introduction

The BLOKEES Transformers Defender Version 04: Tyrants Fury Unitary Surprise (Model 71404) delivers an exciting experience with surprise figures inspired by the mighty Decepticons. Each box contains an assemblable Transformer with a detailed mechanical design, rugged styling, and articulated parts. This product combines construction, action, and collecting, offering an engaging experience for enthusiasts.

Figure 1: Example of an assembled BLOKEES Transformers Defender Version 04 figure.

2. Safety Information

• Not suitable for children under 3 years due to small parts that can cause choking.
• Use under adult supervision, especially for young children.
• Keep the packaging as it contains important product information.
• Do not put the pieces into the mouth, nose, or ears.
• Keep away from fire, heat sources, and liquids.
• Check periodically for missing or damaged parts before use.
• Product designed exclusively for game and collection; it is not a protective item.

3. What's in the Box

Each BLOKEES Transformers Defender Version 04 package contains:

• Surprise Model Kit (unassembled figure parts)
• Instructions
• Collector's Card

4. Setup and Assembly Instructions

Assembly is required for your BLOKEES figure. Carefully open the package and identify all components. Follow the included instructions sheet to connect the articulated parts and form your Transformer figure. Ensure all connections are secure but avoid excessive force.

Figure 2: An example of a fully assembled BLOKEES figure.

Assembly Demonstration Video

Video 1: Official video demonstrating the assembly and features of the Blokees Defender Version 4 figures.

5. Operating Instructions

Your BLOKEES figure features high articulation, allowing for various poses and dynamic display options. Gently manipulate the joints to achieve desired stances. Some figures may also have alternate modes (e.g., vehicle mode) which can be achieved by reconfiguring the parts according to the included instructions.

Figure 3: Example of a BLOKEES figure posed dynamically.

Figure 4: Example of a BLOKEES figure in an alternate vehicle mode.

6. Maintenance

To maintain your BLOKEES figure, keep it clean and free from dust. Use a soft, dry cloth for cleaning. Avoid harsh chemicals or abrasive materials, as these can damage the plastic and paint. Store the figure away from direct sunlight and extreme temperatures to prevent material degradation and color fading.

7. Troubleshooting

• Loose Joints: If joints become loose over time, a small amount of clear nail polish or a similar non-permanent adhesive can be applied to the joint peg, allowed to dry slightly, then reassembled to increase friction.
• Stuck Parts: If parts are difficult to move, gently warm the area with a hairdryer on a low setting for a few seconds to soften the plastic, then attempt to move the part. Do not overheat the plastic.
• Missing Parts: If you find any parts missing upon opening, please contact BLOKEES customer support immediately.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to report any issues, please refer to the original product packaging or visit the official BLOKEES website. You may also contact BLOKEES customer service through their designated support channels for assistance.