BETUMODA Level 1&2 EV Charger (16A, 25FT) - Instruction Manual

1. Product Overview

The BETUMODA Level 1&2 EV Charger is designed for efficient and flexible electric vehicle charging. This portable charger supports both 110V (Level 1) and 240V (Level 2) power sources, offering adjustable current settings from 8A to 16A and an intelligent delay timer. It is compatible with all SAE J1772 electric vehicles and plug-in hybrids, with a Tesla adapter required for Tesla vehicles. The charger features a 2.8-inch Touch LED display for real-time charging information and advanced safety protections.

2. Setup

2.1 Package Contents

Before beginning installation, verify that all components are present in the package:

• BETUMODA Level 1&2 EV Charger Unit (25FT cable)
• NEMA 5-15 Plug Adapter
• Control Box Holder
• Fixed Nails/Screws for Holder Installation
• Portable Carry Bag
• User Manual

2.2 Initial Preparation and Control Box Installation

Before connecting the charger to your vehicle, ensure the charging connector's silicone cover is removed. The control box can be mounted to a wall using the provided holder and screws for stability and organization.

1. Carefully remove the silicone protective cover from the SAE J1772 charging connector.
2. Select a suitable location for the control box holder, ensuring it is near a compatible power outlet and within reach of your vehicle's charging port.
3. Secure the control box holder to the wall using the provided fixed nails/screws.
4. Align the sliding hole on the back of the charger's control box with the holder and slide it into place to secure it.

2.3 Connecting to Power

The BETUMODA EV Charger supports both NEMA 5-15 (110V) and NEMA 6-20 (240V) outlets. Use the appropriate plug for your power source.

• For Level 1 charging (110V), use the NEMA 5-15 plug. Note: The 5-15 adapter is compatible only with 5-15 outlets and should not be used above 16A.
• For Level 2 charging (240V), use the NEMA 6-20 plug.

3. Operating Instructions

3.1 Display Overview

The 2.8-inch Touch LED display on the control box provides real-time information including voltage, current, power load, charging time, and status. This allows for comprehensive monitoring of your charging session.

3.2 Adjusting Current Settings

The charger allows you to adjust the charging current to suit your needs (8A, 10A, 13A, 16A).

1. To select current mode: Long press the 'A' button on the control box. The current value on the screen will turn red, indicating that the current mode is selected.
2. To switch current values: While in current selection mode (red display), short press the 'A' button to cycle through 8A, 10A, 13A, and 16A.
3. The setting is automatically saved after a few seconds of inactivity or when charging begins.

3.3 Setting the Delay Timer

The intelligent delay timer allows you to schedule charging from 1 to 12 hours in advance.

1. To activate timer mode: Long press the timer button (clock icon) on the control box. The timer value on the screen will become adjustable.
2. To adjust delay time: Short press the timer button to cycle through delay times from 1 to 12 hours.
3. The charger will begin charging after the set delay period has elapsed.

3.4 Starting and Stopping Charging

1. Ensure the charger is properly connected to a power outlet and the desired current/timer settings are configured.
2. Insert the SAE J1772 charging connector into your vehicle's charging port. The charger will automatically initiate the charging process or begin after the set delay.
3. To stop charging, press the release button on the charging connector and remove it from the vehicle. Alternatively, disconnect the charger from the power outlet.

4. Maintenance

4.1 General Care

To ensure the longevity and optimal performance of your BETUMODA EV Charger, follow these general maintenance guidelines:

• Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• Regularly inspect the charging cable and connectors for any signs of damage, wear, or corrosion. If any damage is observed, discontinue use and contact customer support.
• Avoid bending or kinking the cable excessively, as this can damage internal wiring.

4.2 Environmental Conditions

The charger is designed with an IP65 rating, providing protection against dust and water splashes. It has been tested for performance in various temperatures.

• While the charger is rated IP65 for water and dust resistance, it is recommended to avoid prolonged exposure to heavy rain or direct water jets.
• Operate and store the charger within the specified temperature ranges to ensure optimal performance and safety.

5. Troubleshooting

If you encounter issues with your BETUMODA EV Charger, refer to the following common troubleshooting steps:

5.1 Charging Not Initiating

• Check Power Connection: Ensure the charger's power plug is securely inserted into a functional wall outlet.
• Check Vehicle Connection: Verify that the SAE J1772 connector is fully and correctly inserted into your vehicle's charging port.
• Review Display: Check the LED display for any error messages or indicators.
• Timer Setting: If a delay timer is set, charging will not start until the programmed time has elapsed.

5.2 Interrupted Charging

The charger is equipped with advanced protection features that may interrupt charging for safety reasons:

• Overheat Protection: If the charger or vehicle components become too hot, the charger may pause or stop. Allow it to cool down before resuming.
• Overvoltage/Overcurrent Protection: If voltage or current levels exceed safe limits, the charger will stop. Ensure your power source is stable and within specifications.
• Ground Fault: If a ground fault is detected, the charger will cease operation. Disconnect and inspect the setup.

5.3 Display Issues

• If the display is blank or unresponsive, ensure the charger is receiving power. Try unplugging and re-plugging the charger.

For persistent issues or error codes not listed, please refer to the detailed user manual or contact BETUMODA customer support.

6. Specifications

7. Warranty and Support

BETUMODA products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official BETUMODA website. If you require technical assistance, have questions about product operation, or need to report an issue, please contact BETUMODA customer support through the vendor's contact information provided at the point of purchase or on their official website.