Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Tivoli Audio PAL BT (Gen 3) Portable Bluetooth FM Radio. Please read this manual thoroughly before using your device to ensure proper function and longevity.
Image: The Tivoli Audio PAL BT (Gen 3) radio, showcasing its compact design and front controls.
Package Contents
Verify that all items are present in your package:
- Tivoli Audio PAL BT (Gen 3) Portable Bluetooth FM Radio
- USB-C Charging Cable
- Owner's Manual (this document)
Setup
1. Charging the Battery
The PAL BT (Gen 3) features a built-in rechargeable battery. Before first use, fully charge the device.
- Locate the USB-C charging port on the back or side of the unit.
- Connect the provided USB-C cable to the radio and to a compatible USB power adapter (not included) or a powered USB port.
- The charging indicator light will illuminate. Allow several hours for a full charge. A full charge provides over 14 hours of playback.
Image: Side view of the Tivoli Audio PAL BT (Gen 3), illustrating its portable design and potential location for the USB-C charging port.
2. Powering On/Off
Use the multi-function knob on the front of the unit to control power and source selection.
- To power on, rotate the knob from "OFF" to "FM", "AUX", or "BT".
- To power off, rotate the knob to "OFF".
Operating Instructions
1. Controls Overview
The PAL BT (Gen 3) features three main control knobs:
- Source/Power Knob: Selects between OFF, FM, AUX, and Bluetooth (BT) modes.
- Tuning Knob: Adjusts the FM radio frequency.
- Volume Knob: Controls the audio output level.
Image: Front view of the PAL BT (Gen 3) highlighting the control knobs and FM frequency dial.
2. FM Radio Operation
- Rotate the Source/Power knob to "FM".
- Extend the telescopic antenna for optimal reception.
- Rotate the Tuning knob to select your desired FM station.
- Adjust the Volume knob to your preferred listening level.
3. Bluetooth (BT) Pairing
The PAL BT (Gen 3) uses Bluetooth 5.0 for wireless audio streaming.
- Rotate the Source/Power knob to "BT". The Bluetooth indicator light will begin to flash, indicating it is in pairing mode.
- On your Bluetooth-enabled device (e.g., smartphone, tablet), go to its Bluetooth settings and enable Bluetooth.
- Search for available devices. You should see "Tivoli PAL BT" or similar in the list.
- Select "Tivoli PAL BT" to connect. Once paired, the Bluetooth indicator light on the radio will glow solid.
- You can now stream audio from your device to the PAL BT (Gen 3).
4. Auxiliary Input
Connect external audio sources using the auxiliary input.
- Rotate the Source/Power knob to "AUX".
- Connect a 3.5mm audio cable (not included) from your external audio device's headphone jack or line-out to the AUX input port on the PAL BT (Gen 3).
- Play audio from your external device.
- Adjust the Volume knob on the PAL BT (Gen 3) and your external device for optimal sound.
5. Headphone Output
For private listening, connect headphones to the dedicated output.
- Plug a standard 3.5mm headphone jack into the headphone output port.
- The internal speaker will mute automatically.
- Adjust the Volume knob for comfortable listening.
Maintenance
Cleaning
To maintain the appearance of your PAL BT (Gen 3):
- Always unplug the unit before cleaning.
- Use a soft, dry cloth to wipe the surfaces.
- Avoid using abrasive cleaners, solvents, or strong detergents, as these can damage the finish.
Battery Care
To maximize battery life:
- Avoid fully discharging the battery frequently.
- If storing the unit for an extended period, charge it to approximately 50% every few months.
- Do not expose the unit to extreme temperatures.
Weather Resistance
The PAL BT (Gen 3) is designed with a weather-resistant housing, making it suitable for outdoor use. However, it is not waterproof. Avoid submerging the unit in water or exposing it to heavy rain for prolonged periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Battery discharged; Unit not turned on. | Charge the battery using the USB-C cable; Rotate the Source/Power knob to an active source (FM, AUX, BT). |
| No sound | Volume too low; Incorrect source selected; Headphones connected. | Increase volume; Select correct source; Disconnect headphones. |
| Poor FM reception | Antenna not extended; Weak signal. | Fully extend the telescopic antenna; Reposition the radio for better signal. |
| Bluetooth not pairing | Radio not in pairing mode; Device too far; Previously paired device connected. | Ensure radio is in BT mode and indicator is flashing; Move device closer; Disconnect from other devices or forget "Tivoli PAL BT" on your device and re-pair. |
Specifications
- Model Number: PALBT3-3059-NA
- Connectivity: Bluetooth 5.0, FM Tuner, Auxiliary Input
- Power Source: Battery Powered (USB-C charging)
- Battery Life: Over 14 hours (playback)
- Dimensions (L x W x H): 3.6" x 4.5" x 6"
- Special Features: Portable, Weather-Resistant Housing
- Included Components: Owner's Manual
Warranty Information
The Tivoli Audio PAL BT (Gen 3) comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please visit the official Tivoli Audio website or contact customer support.
Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact Tivoli Audio customer support:
- Website: www.tivoliaudio.com/support
- Email: Refer to the Tivoli Audio website for contact information.
- Phone: Refer to the Tivoli Audio website for contact information.
When contacting support, please have your product model number (PAL BT (Gen 3)) and purchase information ready.