1. Introduction
This HOMCOM wall-mounted TV stand is designed to optimize your living space by elevating your media center. It frees up floor space, contributing to a more open and tidy environment, and simplifies cleaning. The unit features a specific slot for a set-top box and a cable opening, elegantly concealing all cables for a clean and organized look in your gaming and streaming space.
It offers a flip-down drawer for storing items like remote controls, two open shelves for media devices, and a wide tray for display or additional storage, making this TV unit both practical and aesthetic. With its dimensions of 120 cm wide, this white TV unit is ideal for televisions up to 50 inches, combining functionality and design.
Figure 1: The HOMCOM Wall-Mounted TV Stand installed in a modern living room, showcasing its space-saving design and integrated storage.
2. Safety Information
Warning: Mount the furniture to the wall using the supplied screws to prevent the risk of tipping. Keep out of reach of children. Ensure the wall material is suitable for supporting the weight of the TV stand and its contents. If unsure, consult a professional for installation.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- TV Stand Panels (various sizes)
- Assembly Hardware (screws, dowels, cam locks, hinges)
- Wall Mounting Hardware (screws, wall anchors)
- Instruction Manual
4. Setup and Assembly
Assembly of this wall-mounted TV stand is required. Follow these general steps for proper installation. Specific detailed instructions and diagrams are provided in the included paper manual.
- Prepare the Area: Clear the wall where the TV stand will be mounted. Ensure there are no electrical wires or plumbing in the drilling path.
- Assemble the Unit: Follow the step-by-step instructions in the provided manual to assemble the main body of the TV stand, including the drawer and shelves.
- Mark Wall Mounting Points: Hold the assembled unit against the wall at the desired height. Use a level to ensure it is straight. Mark the drilling points for the wall mounting brackets.
- Drill Holes and Install Anchors: Drill pilot holes at the marked points. Insert appropriate wall anchors suitable for your wall type (e.g., concrete, drywall).
- Mount the TV Stand: Securely attach the TV stand to the wall using the provided screws and mounting hardware. Ensure it is firmly fixed and stable before placing any items on it.
Figure 2: Overview of the TV stand's storage features, including the flip-down drawer and two open shelves, crucial for assembly planning.
Figure 3: Detail of the hinge mechanism for the flip-down drawer, illustrating a key component for assembly.
5. Operating Instructions
Once assembled and securely mounted, the HOMCOM TV stand provides functional storage and display space.
- Cable Management: Utilize the integrated cable hole to route and conceal power cords and signal cables from your TV and media devices. This helps maintain a tidy appearance and prevents cable clutter.
- Storage: The flip-down drawer is suitable for storing smaller items like remote controls, game controllers, or manuals. The two open shelves are ideal for media players, soundbars, or decorative items.
- Weight Capacity: Do not exceed the maximum recommended load of 45 kg (99 lbs) for the entire unit. Distribute weight evenly across the shelves and drawer.
Figure 4: A close-up view of an open shelf, demonstrating the integrated cable management hole for organizing electronic device wires.
Figure 5: Detailed view of the cable hole and a dedicated router hole, designed for efficient cable organization and signal reception.
6. Maintenance
To ensure the longevity and appearance of your HOMCOM TV stand, follow these simple maintenance guidelines:
- Cleaning: Clean the surface with a dry, soft cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the engineered wood finish.
- Inspection: Periodically check all mounting hardware and assembly connections to ensure they remain tight and secure. Tighten any loose screws as needed.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the finish.
7. Troubleshooting
If you encounter any issues with your HOMCOM TV stand, consider the following:
- Unit feels unstable: Ensure all wall mounting screws are securely fastened and that the wall anchors are appropriate for your wall type. Re-check all internal assembly connections.
- Drawer/Shelf not operating smoothly: Check for any obstructions. Ensure hinges and slides are properly aligned and tightened.
- Missing parts: Refer to the package contents list. If parts are missing upon delivery, contact customer support for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | FR83B-528V00WT0531 |
| Overall Dimensions (L x W x H) | 120 x 24 x 16 cm |
| Weight | 8.5 kg |
| Material | Engineered Wood |
| Color | White |
| Maximum Load Capacity | 45 kg (99 lbs) |
| Number of Drawers | 1 (Flip-down) |
| Number of Open Shelves | 2 |
| TV Size Compatibility | Up to 50 inches |
| Special Features | Cable management hole, Flip-down drawer, Open shelves, Wall-mounted design |
Figure 6: Dimensional drawing of the TV stand, indicating overall length (120 cm), depth (24 cm), height (16 cm), and maximum load capacity (45 kg).
9. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official HOMCOM website. Keep your purchase receipt for warranty claims.
