Introduction
Thank you for choosing the Garvee Wooden Dining Table Set for 4. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining set. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
WARNING:
- Do not load more than 400 lbs on the tabletop.
- Be careful around sharp edges during assembly and use.
- Ensure all screws and bolts are tightened securely before use. Periodically check and re-tighten as necessary.
- Keep small parts away from children during assembly to prevent choking hazards.
- Assemble the product on a soft, clean surface to prevent scratches.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 1 x Dining Table
- 2 x Upholstered Chairs
- 1 x Upholstered Bench
- Hardware Pack (screws, bolts, Allen wrench)
- Assembly Instructions
Image: The complete Garvee Wooden Dining Table Set, featuring a rectangular table, two upholstered chairs, and one upholstered bench, all in retro gray finish.
Specifications
| Component | Dimensions (L x W x H) | Weight Capacity |
|---|---|---|
| Dining Table | 44.47” x 27.57” x 29.57” | 400 lbs |
| Bench | 38.57” x 10.67” x 18.57” | 400 lbs |
| Chair | 17.97” x 15.77” x 33.87” | 400 lbs |
- Material: Engineered Wood (tabletop), Reinforced Steel (frames), Upholstered (seats and backrests)
- Color: Retro Gray
- Item Weight: Approximately 67.9 pounds (total set)
Image: Diagram illustrating the dimensions and weight capacities of the table, chairs, and bench components.
Setup and Assembly Instructions
This dining set is designed for quick and hassle-free assembly. All necessary tools and hardware are included. Please follow these general steps:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage.
- Identify Parts: Refer to the included parts list and diagrams to identify each component.
- Assemble Table Frame: Attach the table legs to the tabletop using the provided hardware. Ensure all connections are secure. The table features an H-shaped support frame for enhanced stability.
- Assemble Chairs: Attach the chair legs and backrests to the upholstered seats. Tighten all screws firmly.
- Assemble Bench: Attach the bench legs to the upholstered bench seat. Secure all connections.
- Final Tightening: Once all components are assembled, gently place the furniture upright. Double-check and tighten all screws and bolts to ensure maximum stability.
Image: A close-up view of the dining table's base, showing the additional steel pipe reinforcement for improved durability and stability.
Image: A detailed view of the upholstered seat of a Garvee dining chair, showcasing the plush cushioning.
Assembly Video
Video: An official product video from Garvee Direct demonstrating the features and compact design of the dining table set.
Care and Maintenance
To ensure the longevity and appearance of your Garvee dining set, follow these care instructions:
- Cleaning: The furniture is coated with a water- and stain-resistant finish. Simply wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Wipe up spills immediately to prevent staining, especially on upholstered surfaces.
- Heat Protection: Use placemats or coasters to protect the tabletop from hot dishes and moisture.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the finish and upholstery.
- Stability Check: Periodically check all bolts and screws and re-tighten them as needed to maintain structural integrity.
Troubleshooting
If you encounter any issues with your dining set, please refer to the following common solutions:
- Wobbly Table/Chairs/Bench: Ensure all bolts and screws are fully tightened. If the issue persists, disassemble and reassemble the affected part, ensuring all pieces are correctly aligned.
- Missing Parts: Double-check all packaging materials. If parts are genuinely missing, contact Garvee customer support.
- Difficulty Assembling: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Do not force parts together.
- Scratches/Damage: For minor scratches, furniture repair pens or markers matching the finish color may be used. For significant damage, contact customer support for advice.
Warranty and Support
Garvee products are designed for quality and durability. For specific warranty details, please refer to your purchase documentation or contact Garvee customer service.
If you require further assistance, have questions, or need to report missing/damaged parts, please visit the official Garvee Store or contact their customer support directly.
Garvee Store: Visit the Garvee Store on Amazon