Introduction
This manual provides detailed instructions for the proper use, setup, and maintenance of your Skechers Men's Bonhill Analog-Digital Watch, Model SR1189. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Product Overview
The Skechers Bonhill SR1189 is an analog-digital watch designed for versatility and functionality. It features a durable black polycarbonate case, a combination black dial, and a comfortable black polyurethane band. The watch is water-resistant up to 100 meters (330 feet).
Image 1: Front view of the Skechers Bonhill SR1189 Analog-Digital Watch, showcasing the black case, combination dial with analog hands and digital displays, and the blue strap accents.
Image 2: Side view of the Skechers Bonhill SR1189 watch, highlighting the control buttons labeled "ST/STP" (Start/Stop) and "LIGHT" on the right side, and "RESET" and "MODE" on the left side.
Setup and Initial Configuration
1. Adjusting the Watch Band
The black polyurethane band is designed to be self-adjustable for a customized fit. To adjust, locate the buckle and the series of holes on the strap. Select the hole that provides a comfortable and secure fit on your wrist.
Image 3: Close-up of the Skechers Bonhill SR1189 watch band and buckle, showing the textured polyurethane strap and the metal buckle with the Skechers logo.
2. Initial Time Setting (Analog Display)
- Pull out the crown located on the right side of the watch case.
- Rotate the crown to move the analog hour and minute hands to the correct time.
- Push the crown back in to secure the time setting.
3. Initial Time Setting (Digital Display)
Refer to the "Operating Instructions" section for detailed steps on setting the digital time, date, and other functions using the watch buttons.
Operating Instructions
Button Functions
- MODE Button (Bottom Left): Cycles through different modes (Time, Alarm, Stopwatch, Date).
- RESET Button (Top Left): Used for resetting values or selecting items in setting modes.
- ST/STP Button (Top Right): Starts/Stops the stopwatch, adjusts values in setting modes.
- LIGHT Button (Bottom Right): Activates the backlight for the digital display.
Setting Digital Time and Date
- Press the MODE button repeatedly until the digital display shows the time setting mode (often indicated by flashing digits).
- Use the RESET button to select the digit or setting you wish to adjust (e.g., hours, minutes, 12/24-hour format).
- Use the ST/STP button to increase the selected value.
- Continue pressing RESET and ST/STP to set all desired time and date parameters.
- Once all settings are complete, press the MODE button to exit the setting mode.
Using the Stopwatch
- Press the MODE button until the stopwatch display appears (usually showing "00:00:00").
- Press the ST/STP button to start the stopwatch.
- Press the ST/STP button again to pause the stopwatch.
- Press the RESET button to clear the stopwatch to zero.
Setting the Alarm
- Press the MODE button until the alarm setting mode is displayed.
- Use the RESET button to select the hour or minute digits.
- Use the ST/STP button to adjust the alarm time.
- Press the MODE button to confirm and exit.
- To activate/deactivate the alarm, typically a combination of buttons (e.g., RESET and ST/STP simultaneously) or a dedicated indicator in alarm mode is used. Refer to the watch's display for specific indicators.
Maintenance and Care
- Cleaning: Wipe the watch case and band with a soft, damp cloth. Avoid harsh chemicals or abrasive materials.
- Water Resistance: The watch is water-resistant up to 100m (330ft), suitable for bathing, swimming, or snorkeling. It is not designed for scuba diving. Ensure the crown is fully pushed in before any water exposure.
- Temperature: Avoid exposing the watch to extreme temperatures (hot or cold) for extended periods, as this can affect battery life and accuracy.
- Battery Replacement: When the digital display dims or the watch stops functioning, the battery may need replacement. This should ideally be performed by a qualified watch technician to ensure water resistance is maintained.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Analog hands not moving. | Crown is pulled out; battery depleted. | Push the crown in; replace battery. |
| Digital display is blank or dim. | Battery depleted. | Replace battery. |
| Incorrect digital time/date. | Not set correctly; accidental button press. | Refer to "Setting Digital Time and Date" section to reset. |
| Water inside the watch. | Crown not fully pushed in; exceeding water resistance limits. | Immediately take to a qualified watch technician for inspection and repair. Do not attempt to open the watch yourself. |
Specifications
- Model Number: SR1189
- Case Diameter: 54mm
- Band Width: 22mm
- Case Material: Polycarbonate
- Band Material: Polyurethane
- Crystal Material: Acrylic (scratch resistant)
- Movement: Analog-Digital (Anadigi)
- Water Resistance: 100 meters (330 feet) / 10 ATM
- Functions: Time (Analog & Digital), Date, Day, Alarm, Stopwatch, Backlight
Warranty and Support
For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Skechers website. Keep your proof of purchase for any warranty claims.
Skechers Official Website: www.skechers.com
