7AM2M AM115/AM116 Electric Toothbrush Brush Heads User Manual

Introduction

This manual provides essential information for the proper use and maintenance of your 7AM2M AM115/AM116 Electric Toothbrush Replacement Brush Heads. Please read these instructions carefully before use to ensure optimal performance and safety.

Safety Information

Warning: Choking hazard - Keep out of reach of children. Do not use on sensitive areas. May contain materials that can cause allergic reactions in some users. If you experience any discomfort or allergic reaction, discontinue use immediately and consult a healthcare professional.

Package Contents

• 4 x 7AM2M AM115/AM116 Electric Toothbrush Replacement Brush Heads (Black)

Compatibility

These replacement brush heads are specifically designed for use with 7AM2M AM115 and 7AM2M AM116 electric toothbrush models only. Ensure your toothbrush handle is one of these compatible models before attempting to attach the brush head.

Setup and Installation

1. Ensure your electric toothbrush handle is turned off.
2. Align the replacement brush head with the metal shaft on the toothbrush handle.
3. Gently push the brush head down onto the shaft until it clicks securely into place. Do not force the brush head.
4. Pull lightly on the brush head to confirm it is firmly attached before use.

Image: Four black 7AM2M electric toothbrush replacement brush heads are shown in their retail packaging, illustrating the product as it would appear when purchased.

Operating Instructions

1. Wet the bristles of the brush head and apply a small amount of toothpaste.
2. Place the brush head against your teeth at a 45-degree angle to the gum line.
3. Turn on your electric toothbrush.
4. Guide the brush head slowly from tooth to tooth, allowing the bristles to clean each surface. Do not scrub vigorously.
5. Brush all surfaces of your teeth (outer, inner, and chewing surfaces) for the recommended duration, typically two minutes.
6. After brushing, turn off the toothbrush and rinse your mouth and the brush head thoroughly with water.

Maintenance

• Cleaning: After each use, rinse the brush head thoroughly under running water to remove any toothpaste residue and debris.
• Storage: Store the brush head in a dry, well-ventilated area. Avoid storing it in enclosed, damp spaces to prevent bacterial growth.
• Replacement: For optimal oral hygiene and brushing effectiveness, replace your brush head every 3 months, or sooner if the bristles become frayed, splayed, or show signs of wear.
• Avoid: Do not use bleach, harsh detergents, or hot water (above 60°C / 140°F) to clean the brush head, as this may damage the bristles or material.

Specifications