Garvee 10-Compartment Metal Chicken Nesting Box User Manual

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your Garvee 10-Compartment Metal Chicken Nesting Box. Designed for efficient egg collection, this nesting box features a rollaway system to keep eggs clean and safe. Constructed from galvanized steel with rust-proof plastic trays, it offers durability and ease of cleaning. Please read these instructions carefully before use to ensure proper setup and optimal performance.

Setup and Assembly

The Garvee Chicken Nesting Box is designed for tool-free assembly, typically taking less than 5 minutes. All necessary hardware is included.

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components are present.
2. Assemble Frame: Utilize the pre-drilled holes and snap-together parts to construct the main frame of the nesting box. Ensure all connections are secure.
3. Install Egg Trays: Slide the plastic egg trays into their designated slots.
4. Placement Options: The nesting box can be placed directly on the ground or wall-mounted. For wall mounting, use the keyhole hangers located on the back of the unit. The ideal mounting height is 18-20 inches from the ground to the bottom of the box.

Operating Instructions

This nesting box is designed to provide a comfortable and secure environment for hens to lay eggs, with an automatic collection system.

Egg Rollaway System

The nesting box features a declined floor design that gently guides laid eggs into a front collection tray. This system ensures eggs remain clean, prevents cracking, and protects them from pecking by hens. Eggs are collected hands-free, reducing the need to disturb nesting hens.

Encouraging Use

The extra-large interior (14"x14") and dark, private design mimic natural nesting conditions, which helps reduce egg-eating behavior and encourages consistent laying. Ensure the nesting box is placed in a quiet, accessible area of the coop.

Maintenance and Cleaning

Regular cleaning is essential for poultry hygiene and the longevity of the nesting box. The design facilitates quick and easy maintenance.

Cleaning Procedure

1. Remove Trays: The plastic egg trays are slide-out for easy removal.
2. Rinse Trays: Rinse the trays with water. Drainage holes prevent water accumulation.
3. Wipe Surfaces: The galvanized steel surfaces are wipe-clean. Use a damp cloth to remove any debris or droppings.
4. Inspect: Periodically inspect the nesting box for any signs of wear or damage.

The galvanized steel construction is resistant to rust and moisture, ensuring durability in various coop environments. Ventilation holes promote airflow, contributing to a healthy environment for your flock.

Troubleshooting

If you encounter issues with your Garvee Chicken Nesting Box, consider the following common solutions:

• Eggs Not Rolling: Ensure the nesting box is installed on a level surface if freestanding, or securely mounted without tilt if wall-mounted. Check that no debris is obstructing the rollaway path.
• Hens Not Using Box: Chickens may need time to adjust to a new nesting area. Ensure the box is in a quiet, private location. Consider placing a dummy egg in each compartment to encourage use. Verify the box is at the recommended height (18-20 inches from the ground).
• Damage or Wear: While built for durability, inspect for any loose parts or damage. Contact customer support if significant damage is observed.

Product Specifications

Warranty Information

For specific warranty details regarding your Garvee Chicken Nesting Box, please refer to the product packaging or contact Garvee customer support directly. Keep your proof of purchase for any warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or need troubleshooting guidance not covered in this manual, please contact Garvee customer support. Visit the official Garvee store on Amazon for contact information or additional resources: Garvee Store.