1. Introduction
Thank you for choosing the LEONLITE 30W LED Security Light with GFCI Outlets. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only UL/ETL listed wire for connections.
- Ensure all connections are secure and properly insulated.
- Do not install near combustible materials.
- The GFCI outlets are for outdoor use and must be protected from direct water spray.
3. Package Contents
The package includes the LEONLITE 30W LED Security Light with GFCI Outlets and a light kit for installation.
4. Product Features
- Dual GFCI Outlets: Two built-in Ground Fault Circuit Interrupter outlets provide convenient and safe power access for outdoor tools and devices. These outlets remain powered when the main switch is on, regardless of lighting mode.
- Two Lighting Modes:
- Motion Sensor Mode: Light remains off during the day and activates at night when motion is detected.
- Dusk to Dawn Mode: Light remains on throughout the night and turns off automatically during the day.
- Adjustable Illumination Duration: Selectable delay durations of 30s, 60s, or 120s for motion-activated lighting.
- Wide Sensing Range: Motion detection range from 13ft to 45ft with a 150° detection angle.
- Adjustable Heads and Sensor: The two light heads and the motion sensor are independently adjustable for optimal coverage.
- Durable Construction: Made from aluminum and polycarbonate, suitable for wet locations and operating temperatures from -4°F to 104°F.
- ETL Certified: Ensures compliance with safety standards.
5. Setup (Installation)
This security light is designed for wall or ceiling mount installation. Professional installation is recommended.
5.1 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Ensure the mounting surface is clean and dry.
5.2 Wiring
- Connect the black wire from the fixture to the black (live) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the green (ground) wire from the fixture to the bare copper or green (ground) wire from the junction box.
- Secure all wire connections with appropriate wire nuts and electrical tape.
5.3 Mounting
- Attach the mounting plate to the junction box using the provided screws.
- Align the fixture with the mounting plate and secure it with the retaining screws.
- Ensure the fixture is sealed against the mounting surface to prevent water intrusion.
5.4 GFCI Outlet Activation
After power is restored, press the RESET button on each GFCI outlet to activate them. A green indicator light should appear.
Image: Pressing the RESET button on the GFCI outlet to activate it.
Video: Demonstrates the installation process and activation of the GFCI outlets on the security light.
6. Operating Instructions
6.1 Adjusting Light Heads and Sensor
The two light heads can be adjusted up to 160 degrees horizontally and 350 degrees vertically. The motion sensor can be rotated 140 degrees horizontally and 160 degrees vertically to cover the desired area.
Image: Adjustable light heads and motion sensor for customized coverage.
6.2 Setting Lighting Modes and Sensitivity
The control panel on the motion sensor allows you to select the operating mode, light duration, and motion sensitivity.
Image: Motion sensor control panel with time and sensitivity settings.
- TIME Setting: Adjusts how long the light stays on after motion is detected. Options are 30s, 60s, or 120s. The 'TEST' mode is for verifying sensor operation during daylight.
- SENSITIVITY Setting: Adjusts the motion detection range. Options are L (13-20ft), M (20-33ft), or H (33-45ft).
- Dusk to Dawn Mode (D2D): To activate this mode, set the TIME dial to the 'D2D' position. The light will remain on all night and turn off automatically at dawn.
- Motion Sensor Mode: To activate this mode, set the TIME dial to 30s, 60s, or 120s. The light will only activate at night when motion is detected.
Image: Motion detection range and coverage area.
7. Maintenance
- Cleaning: Clean the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the fixture for any damage to the wiring, housing, or lenses.
- GFCI Testing: Test the GFCI outlets monthly by pressing the 'TEST' button, then the 'RESET' button. The power should trip and then reset. If it does not, the GFCI may be faulty and should be replaced.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | No power; Sensor set to 'TEST' mode; Ambient light too high; Faulty sensor. | Check circuit breaker; Ensure TIME dial is not on 'TEST'; Relocate fixture or adjust sensor; Contact support. |
| Light stays on during the day. | Sensor is covered or obstructed; Wiring error; Faulty sensor. | Clear obstruction from sensor; Verify wiring connections; Contact support. |
| Light turns on too frequently or not enough. | Sensitivity setting is too high/low; Sensor is aimed incorrectly. | Adjust SENSITIVITY dial; Reposition sensor to cover desired area. |
| GFCI outlets are not working. | GFCI tripped; No power; Faulty GFCI. | Press 'RESET' button on GFCI; Check circuit breaker; Contact support. |
9. Specifications
- Brand: LEONLITE
- Model Number: A-65487
- Wattage: 30W
- Brightness: 2800 lumens
- Color Temperature: 5000K Daylight
- Voltage: 120V
- Material: Aluminum, Polycarbonate
- Color: White
- Indoor/Outdoor Usage: Outdoor
- Water Resistance Level: Waterproof (Wet Location)
- Operating Temperature: -4°F to 104°F
- Dimensions (L x W x H): 8.62" x 6.57" x 5.98" (219mm x 167mm x 152mm)
- Certifications: ETL, FCC, UL Listed
Image: Product dimensions.
10. Warranty
This LEONLITE product comes with a 3-year manufacturer's warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
11. Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact LEONLITE customer support through their official website or the retailer where the product was purchased. Please have your model number (A-65487) and purchase date available when contacting support.
