1. Important Safety Instructions
Please read all instructions carefully before using this heater. Failure to follow these instructions may result in fire, electric shock, injury to persons, or property damage.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has a Multi-Protection Safety System including an automatic overheat shutoff and a tip-over switch.
Safety Features:
- Overheat Protection: The heater will automatically shut off if it overheats.
- Tip-Over Protection: The heater will automatically shut off if it is accidentally knocked over. Operation resumes once the unit is placed upright.
- Flame-Retardant Materials: Constructed from V-0 flame-retardant materials to minimize fire hazards.
- Enhanced Safety Plug: Designed for secure electrical connection.
2. Product Overview
The Electactic Portable Ceramic Space Heater (Model H36902) is a versatile 2-in-1 device offering both heating and cooling functions. It features PTC ceramic heating technology for rapid warmth and a fan mode for cool air circulation. Its compact design and built-in safety features make it suitable for various indoor spaces.
3. Setup
3.1 Placement
Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 meters) of clear space around the heater to allow for proper airflow and to prevent fire hazards. Do not place the heater on soft surfaces like rugs or carpets that could block the air intake.
3.2 Power Connection
Plug the heater directly into a 120V AC, 60Hz wall outlet. Do not use extension cords, power strips, or surge protectors with this appliance. Ensure the outlet is in good condition and not loose.
4. Operating Instructions
4.1 Power On/Off
To turn the heater on, rotate the power/mode knob to your desired setting (Fan, Low Heat, or High Heat). To turn off, rotate the knob to the 'OFF' position.
4.2 Heating Modes
The heater offers three modes:
- Fan Only: Circulates cool air.
- Low Heat (750W): Provides moderate warmth, ideal for smaller spaces or maintaining temperature.
- High Heat (1500W): Delivers maximum warmth for rapid heating of areas up to 200 square feet.
4.3 Thermostat Control
Adjust the thermostat knob to set your desired room temperature between 41°F and 95°F. The heater will automatically cycle on and off to maintain the set temperature, providing energy-efficient heating.
4.4 Quiet Operation
Designed for quiet operation, the heater produces less than 45 decibels of noise, making it suitable for use in bedrooms, offices, or dorms without disturbance.
4.5 Official Product Videos
Electactic Portable Ceramic Space Heater Overview:
Video: This official seller video provides a general overview of the Electactic Portable Ceramic Space Heater, showcasing its features and design.
Electactic Space Heater Tip-Over Safety Demonstration:
Video: This official seller video demonstrates the tip-over safety feature of the Electactic Space Heater, showing how it automatically shuts off when tilted.
5. Maintenance
5.1 Cleaning
- Always unplug the heater before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
- Gently vacuum the air intake and exhaust grilles to remove dust and lint buildup.
- Ensure no water or other liquids enter the interior of the heater.
5.2 Storage
When not in use, store the heater in a cool, dry location. It is recommended to store it in its original packaging to protect it from dust and damage.
6. Troubleshooting
If your heater is not operating correctly, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; power outlet not working; tip-over switch activated; overheat protection activated. | Ensure plug is firmly in a working outlet. Check household circuit breaker. Place heater on a flat, stable surface. Allow heater to cool down for 30 minutes, then restart. |
| Heater blows cold air in heat mode. | Thermostat set too low; unit in fan-only mode. | Increase the thermostat setting. Ensure the mode knob is set to Low Heat or High Heat. |
| Heater stops working unexpectedly. | Overheat protection activated; tip-over switch activated. | Allow heater to cool down. Ensure heater is on a stable surface and not obstructed. |
| Reduced heat output. | Air intake/exhaust blocked; dust buildup. | Clear any obstructions. Clean air grilles as per maintenance instructions. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Electactic |
| Model Number | H36902 |
| Power Source | Electric |
| Voltage | 120 volts |
| Amperage | 12.5 A |
| Heat Output | 1500 watts (High), 750 watts (Low) |
| Heating Method | PTC Ceramic |
| Heating Coverage | Up to 200 sq.ft |
| Min Temperature Setting | 41 °F |
| Max Temperature Setting | 95 °F |
| Special Features | Adjustable Temperature, Electronic Thermostat, Fast Heating, Overheat Protection, Tip-Over Protection |
| Item Dimensions (D x W x H) | 5.47"D x 6.85"W x 9.65"H |
| Item Weight | 2 pounds |
| Indoor/Outdoor Usage | Indoor |
8. Warranty and Support
For warranty information or technical support, please contact Electactic customer service. Refer to the product packaging or the official Electactic website for contact details.
Please retain your proof of purchase for any warranty claims.